How to deal with the hard grinding of shoes, do not grind feet

1. Wipe the liquor.

Baijiu is volatile and a good softener. Pour the alcohol onto a clean towel and gently wipe over the foot grind area. When the slippers become softer, they basically don't grind their feet.

If you are worried that the effect is not satisfactory, you can also use a wet paper towel dipped in alcohol to wrap it in slippers. Overnight, your slippers will become very soft.

2.Stretch with a beverage bottle.

Some shoes are the right size, but because they are new, they don't fit the shape of the foot. Opt for some drink bottles, cut them to the shape of your shoes, and put them in your slippers to make a leg. When your shoes are wider, the problem of grinding your feet is alleviated.

3.Press with an appliance.

The corners of some shoes are not very smooth, so they will rub against ** when walking, and even have scratches. Wrap a hot towel over your shoes first, and when they're a little softer, roll them up in a glass or glass to smooth out the corners.

4.Correct with tools.

Some shoes are not produced by regular manufacturers, and the shoe version does not fit very well. In this case, it is necessary to use a hammer to correct the shoes. It might be much better if you wear them next time.

5.Use a band-aid.

If you don't have any trouble with these methods, there is an easier way to put a band-aid on the place where you grind your feet. However, it is estimated that it will be ugly to paste a whole block. Band-aids can be cut into strips as wide as the laces of a slipper and then applied to prevent rubbing without affecting the aesthetics.

What to do if the shoes are too hard to rub your feet.

Here's how to deal with shoe grinding:

Shoe grinding can soften the leather of the shoe and reduce the hardness of the leather. The contact point between the shoe and the foot becomes soft and comfortable, so there is no need to grind the foot. Commonly used methods to soften the cortex are:

1. Apply the material.

Apply common materials such as creams, liquors, soaps, candles to the feet of the shoes, evenly apply them to the feet of the shoes, and soak them overnight to soften the leather.

2. Pound the leather.

If you are grinding your feet at the edge of the heel of the shoe, you can use the method of hammering, first soak the towel with hot water, cover the edge of the heel for a few minutes, so that the leather is wet and soft, easy to deform, and then take a rolling pin, glass bottle and other cylindrical objects to gently knock and crush until the leather is deformed to a suitable level. In order to fit the size, you can try it on while playing to prevent over-beating, which will cause the shoes to not follow your feet.

3. Expansion method.

If it is due to the small size of the shoes, or the feet are too fat and the shoes are too thin, resulting in squeezing the forefoot, you can use this method. Soak the newspaper, don't have too much water, soften the newspaper, and then stuff it into the shoes, according to the actual situation, decide the number of newspapers to stuff, and leave it for a period of time to eliminate the trouble, you can achieve the purpose of propping up the shoes.

Reasons why shoes wear feet

1. The production process of the shoes themselves. In the manufacture of leather shoes, most of the leather shoes will be placed on the front and back of the chemical tablet, which plays a role in the qualitative shape of the shoe, and the heel of the shoe is usually stitched together by two pieces of leather, and the slight gap between the heel and the shoe will be worn out. This is due to the manufacturing process of the shoes themselves and is unavoidable.

2. The shoes are not suitable. When choosing shoes, because you choose shoes that don't fit your foot shape, you will inevitably wear your feet when you wear them.

3. Improper walking posture. Incorrect walking posture can also add stress to your feet, allowing more friction between your feet and your shoes.

4. Shoe quality problems. The material of the shoes is too hard and the workmanship is not good, which will cause foot grinding, which belongs to the quality of the shoes themselves.

Summary. There are three ways to grind shoes: 1. Apply liquor, soap, candles, etc. to the position where the shoes grind the feet, which can soften the leather.

2. Find a towel to soak it, put it on the place where the shoes rub your feet, and then use a wooden stick to roll it back and forth. 3. Take a hair dryer to blow the place where you grind your feet, and step on it while blowing, and your shoes will soften and you won't be so sharp.

There are three ways to grind shoes: 1. Apply liquor, soap, candles, etc. to the Tongnianzhou position where the shoes grind the feet, which can be highlighted to soften the leather. 2. Find a towel to soak it, put it on the place where the shoes grind the feet, and then use the wooden rod to roll it back and forth.

3. Take a hair dryer to blow the place where you grind your feet, and step on it while blowing, and your shoes will soften and you won't be so sharp.

Shoe maintenance: Before wearing shoes, you can use soap or candles to apply a layer of wax to the contact area with the heel, so that the inside of the shoes can become smooth and prevent foot grinding. 2. Vaseline can maintain shoes, so you can apply Vaseline on some parts of the shoes, and then place it for 2 or 3 days after the attack, during which you need to apply it continuously to achieve the purpose of softening the shoes.

When buying shoes, try to buy shoes that fit the size of your feet and are comfortable to wear, but don't give up comfort for the sake of beauty

Hello, thank you very much for your patience, I am honored to answer for you, for you in Huayu Health to find a solution to the shoes to grind your feet: 1. Apply materials. Apply common materials such as:

Creams, liquor, snow soaps, candles, evenly applied to the grinding of the feet, soaked overnight, can play a role in softening the leather. 2. Pound the leather. If it is a foot grinding at the edge of the heel of the shoe, you can use the method of hammering, first wet the towel with hot water, cover the early edge of the heel beam for a few minutes, so that the leather is wet and soft, easy to deform, and then take a rolling pin, glass bottle and other cylindrical objects to gently knock and crush.

Until the leather is deformed and lurks until the liquid residue is suitable, in order to fit the size, you can try it on while playing to prevent excessive knocking and causing the shoes to not heel the feet.