How do I remove my vivo SIM card?

After the mobile phone is turned off, insert the small round hole on the side of the mobile phone with the tip of the card needle, and the card slot pops up, and you can take out the mobile phone card.

Operate the phone: vivo phone.

The vivo mobile phone card is taken out as follows:

1. First of all, take out the card pick-up needle that comes with the mobile phone. (as shown in the image below).

2. Hold the card pin in your right hand and your mobile phone in your left hand. (as shown in the image below).

3. Aim the card at the card slot on the side crack of the mobile phone, push it in, and the mobile phone card will come out. (as shown in the figure below).

How to get the mobile phone card out of it:

1. The tip of the refill of the refill of the real tube head can penetrate deep into the small hole and eject the mobile phone card. Since the refill may stain the small holes, it is recommended to use a refill with a full true tube tip that is degreased.

2. After the paper clip is straightened, it can go deep into the small hole and eject the mobile phone card. It's fairly easy to find a paper clip.

3. Pins and pins are commonly used on the badge, and students and office workers can use the pins on them to take out the mobile phone card if they have a badge.

4. Toothpicks are easy to find in restaurants, but when using toothpicks, be careful not to break the tip into the hole, otherwise it will be sad.

5. The pin can be used as a substitute for the needle, but because it is a sharp object, don't poke it too hard. <>

Go to Settings - System Management My Devices - Customer Service - User Manual - Phone Overview and Quick Start - Installation and Preparation to learn how to remove memory cards and SIM cards.

Note: SIM card 1 and SIM card 2 are installed in the same way.

If you have more questions, you can enter the vivo official website vivo**app--my--**customer service or the web version of vivo official website--scroll down to the bottom -**customer service--enter manual customer service to enter the consultation and understanding.

The following describes how to remove the memory card and SIM card.

First, the installation and removal method.

Go to Settings - System Management My Device - Customer Service - User Manual - Phone Overview and Quick Start - Installation and Preparation to learn how to install and remove memory cards and SIM cards.

Note: SIM card 1 and SIM card 2 are installed in the same way.

Second, the SIM card tray cannot be taken out and loaded.

1. Please use a standard SIM card that matches the size of the card tray, and try not to use a cropping card. Due to the different sizes and thicknesses of different types of SIM cards, you may not be able to insert or dial out the phone if you cut the card yourself. If you are using a clipping card, it is recommended to go to the local operator's office to replace the standard SIM card.

2. For the method of taking the card, please refer to the user manual (enter Settings - System Management - Customer Service - User Manual - Mobile Phone Overview and Quick Start - Installation and Preparation).

3. If the above methods fail to solve the problem, please back up your mobile phone data in advance, and bring your mobile phone and purchase voucher to the vivo customer service center web link.

Detect. 3. The SD card cannot be removed or inserted.

1. Confirm whether the memory card model matches the phone.

The memory card model used by the mobile phone is a microSD card (TF card), please check whether the model is matched.

2. Check whether the card pick-up and card loading methods are correct.

For models where the memory card is mounted on the tray: Use the standard pick-up pin to insert the ejector pin hole vertically, press it inward slightly, and after the tray is ejected, remove the card tray and load the memory card according to the user manual. Be careful to distinguish between a thimble hole and a microphone hole.

Models with separate memory cards: The inside of the fuselage is designed with a buckle, and there will be a slight clicking sound when the memory card is fully loaded, and the buckle will jam the memory card at this time. When removing the memory card, press the memory card inward with your fingernails, let go after a slight click, and the memory card will pop out.

Note: You can refer to the user manual for the card tray removal method or memory card installation location (go to Settings - System Management - Customer Service - User Manual - Mobile Phone Overview and Quick Start - Mobile Phone Appearance Introduction Installation and Preparation).

3. Check whether the appearance of the memory card is damaged.

Check the appearance of the memory card for damage, if the clip is notched or the appearance is damaged, it will not be able to be successfully removed and loaded into the phone.

4. Service center testing.

If the above methods do not solve the problem, please back up your mobile phone data in advance, and bring your mobile phone and purchase voucher to vivo customer service center for testing.

You can go to the mobile phone settings - more settings - user manual - mobile phone overview and quick start - installation and preparation to learn how to install and remove the SIM card (some models do not support the installation of SD card).

Steps to remove the mobile phone card:

1. First, turn off the vivo phone.

2. Take out the card pin in the box, and then take out the SIM card slot on the left side of the fuselage, as shown in the figure below.

3. Take out the mobile phone card.

Steps to install the SIM card:

1. Turn off the machine and take it out with the SIM card slot, as shown in the picture above.

2. After taking out the SIM card slot, install the prepared Micro SIM card and Nano SIM card to the corresponding position of the card slot, and then insert the SIM card slot into the SIM card slot of the mobile phone.

3. After completing the above operations, you can turn on the phone, after booting, if vivo X7 can identify the operator, it means that the SIM card has been installed successfully, and it can be used at this point.

The steps to remove the SIM card from vivo mobile phone are the same, and the following uses vivox7 as a reference1Take out the free card pin from the vivo Y85 mobile phone box, or you can use the card pin of other mobile phones.

2.Find the card pick-up hole next to the SIM card slot on the left side of the vivo X7 body.

3.Put the pin into the hole and press the pin inward to eject the tray.

4.Remove the SIM card tray, take the SIM card out, and push the card tray into the card slot, and the SIM card can be turned off.

After the phone is turned off, find the free card pin from the mobile phone box, insert the needle tip into the small round hole on the side of the mobile phone, and the card slot pops out, and you can take out the mobile phone card.

How:

1. Take out the thimble of your mobile phone first;

2. Insert the thimble into the small hole next to the mobile phone card tray;

3. Then you can take out the card tray with a little force;

4. Then you can take the card out.