How to use Audi A6 navigation? How does Odion A6 connect to mobile navigation?

1. After the vehicle engine starts, press the menu key in the area in the next figure;

2. Activate navigation through voice function, as shown in the figure below;

3. You can select the navigation purpose through the MMI knob.

The use of Audi A6 navigation needs to start the Audi A6 engine, and then connect the electronic system of the Audi A6 whole car, press the Audi A6 navigation power button to use, the car navigation uses the car GPS (global positioning system) with the electronic map to carry out, it can easily and accurately tell the driver the shortest or fastest path to the destination, the specific operation steps of using Audi A6 navigation are as follows:

1. Open the door of the Audi A6 driver.

2. Press the brake pedal of the Audi A6 to prepare to start the Audi A6 engine.

3. Press the one-button start button of the Audi A6.

Fourth, the instrument lights of the Audi A6 are all lit up, which proves that the Audi A6 engine is started.

5. Press the navigation power button on the Audi A6 located above the center console.

Sixth, the Audi A6 navigation system can be used when it is turned on.

Note: The navigation system is mainly composed of two parts: the navigation host and the navigation display terminal, and the built-in GPS antenna will receive the data information transmitted by at least 3 of the 24 GPS satellites around the earth, so as to determine the current position of the car.

1.First of all, turn on the computer and click on the navigation (generally the touch screen can be directly selected to enter).

2.Then after the navigation system starts, click Find, which will enter the selection screen or open the input panel.

3.The next step is to enter the address. One way is to make a selection through a list, with provinces, cities, and counties being selected on a case-by-case basis.

4.After the final selection, enter the map, there are two small flag icons (or buttons, usually prompted), click to select and set as the destination.

Added: You can set a start location similar to this. In addition, after the setting is completed, you can simulate the navigation for preview, which is more convenient to use.

The first thing to do is to see what kind of car your car is.

If the 10 models are equipped with 3D navigation.

In the function menu, select Delay Navigation.

If it's the previous navigation, select Delete Destination and you're good to go.

I'm talking about the navigation that the original car was equipped with, and it was not installed after itself.

OneOpen the door on the driver's side of the car.

2. Press the brake pedal of the car to prepare to start the engine.

3. Press the car's one-button start button.

Fourth, the car's instrument lights are all lit up, which proves that the engine is started.

5. Press the switch button of the navigation system located above the center console of the car.

Notes: 1) "Vehicle" refers to motor vehicles and non-motor vehicles.

2) "Motor vehicle" refers to a wheeled vehicle that is driven or towed by a power unit and driven on the road for personnel or for transporting goods and carrying out special engineering operations.

3) "Non-motorized vehicle" refers to a vehicle driven by human or animal power on the road.

and motorized wheelchairs and electric bicycles for the disabled that are driven by power units but are designed to meet the relevant national standards in terms of maximum speed, empty mass and dimensions.

and other means of transportation.

Audi A6 can be connected to mobile phone navigation, and it can be automatically connected after turning on Bluetooth.

Audi A6L <>

2. Click on the multi** setting option.

3. Click on the Other Settings option.

4. Click the checkmark after the handbrake to eliminate.

Hello. We'll be happy to answer for you. Here's how to connect your phone navigation to the display of your Audi A6 car:

1. First of all, select [**] in the multi-screen home interface. 2. In the pop-up interface, continue to select [Connect Mobile**]. 3. Turn on the Bluetooth of the mobile phone, and the multi-** system will automatically retrieve the Bluetooth name of the mobile phone.

4. After the Bluetooth of the mobile phone is displayed in the list, tap the name, and then start to establish the connection. 5. Then confirm the pairing request in the interface that pops up on the phone, allowing the synchronization of "Contacts" and "Personal Favorites". 6. After the connection is successful, you can **mobile phone**, as well as use multi**dial-up call**.

Summary. The method of connecting the mobile phone navigation to the Audi A6 car display is: 1. First of all, make sure that the mobile phone is installed with the correct navigation software, which supports the models of Audi to connect the mobile phone to the carPlay, Android Auto, Mirror Link or the matching Bluetooth system.

3. Open the navigation software on your mobile phone, click "Sync to car screen", if the vehicle has a synchronization record before, it will be retrieved first, just follow the steps to achieve synchronization.

The way to connect the mobile phone navigation to the Audi A6 car display is as follows: 1. First of all, make sure that the mobile phone is installed with the correct navigation software, which supports the models of Audi to connect the mobile phone to the car's carplay, Android Auto, Mirror Link or the matching Bluetooth system. 3. Open the navigation software on your mobile phone, click "Sync to car screen", if there is a synchronization record of the previous car rental, it will be retrieved first, just follow the steps to achieve synchronization.

It is possible to connect to the MMI via Apple CarPlay. Apple mobile phone skillfully turn on Bluetooth,Turn on the built-in airplay,You can project the image of the mobile phone to the central control screen of the car,Your mobile phone is vertically equipped with the sensitive screen, the central control screen is also a vertical screen,The mobile phone is a horizontal screen and follows the horizontal screen,So this way of mapping is not so perfect for the central control of the car of the car,It is recommended to use carplay mobile phone interconnection。