How to make lanterns for young children Steps

Simple way to make children's lanterns.

Flower lanterns, also known as lanterns, are traditional handicrafts of Chinese folk, which were mainly used for lighting in ancient times. Now it is mostly used for the Lantern Festival and the Spring Festival, mainly to increase the festivity. Let's make a simple lantern for children, and let's learn to do it together if you like it.

Tool raw materials paper, pen, scissors, transparent glue.

Method: Read step by step.

Prepare a rectangular piece of paper to make a lantern. There are also pencils and scissors.

Fold the long side of the paper in half.

Draw a wide straight line on the long side.

Then, draw a vertical line of the same width.

Then cut along the scribing line, not exceeding the straight line above.

After cutting, put the paper again.

Then roll the left and right sides into a tube. Glue the upper and lower ends together with transparent glue.

Prepare another note. Paste it on top of the lantern.

The beautiful lantern is complete.

Precautions. 1 Fold the long side of the rectangular piece of paper in half and draw a wide straight line. The sides are narrow and not good-looking, and the lanterns can't support it.

2 Draw a vertical line again, drawing the same width. Drawing a good line is easy to cut neatly and looks good.

3. Roll into a package, and the two ends can be pasted with double-sided tape and solid glue.

How to make lanterns for young children StepsHow to make paper lanterns for children steps and**.

How to make New Year's lanterns by hand with colored paper**, the decorative effect of the night is unexpected. The idea is very simple, fold the colored paper in half and use the embosser to make a beautiful hollow pattern, then roll it up and paste it, and put it in the LED light!

Take out the rectangular colored paper, fold the long side in half, and then cut out the tassel from the folded edge to the opening side, with a depth of about 3 4.

Then take out the embosser and make hollow patterns such as snowflakes and round holes on the folded colored paper.

Open the confetti completely, roll it up and stick it with double-sided tape or glue sticks.

Finally, the LED lights are inserted, and the beautiful New Year's lanterns are made!

The method of making children's lanterns is as follows:

Materials: Yellow paper: 1 sheet of 6x15cm paper, 1 sheet of rose: 9x15cm paper, carving knife, double-sided tape, ruler, pencil.

Operation steps: 1. After the paper is ready, paste double-sided tape on one end of the yellow paper, paste a double-sided tape on the top and bottom of the rose-red paper, lay the paper flat, draw the parallel first of the interval left and right with a ruler, and then use a utility knife or carving knife to cut it. It is not recommended to fold in half here, if you fold in half, the crease comparison will affect the overall effect of this lantern.

Stupid. >2. Tear one of the double-sided tape strips of rose-red paper and align the yellow paper to glue it.

3. After sticking it, turn the origami over and privately use another double-sided tape in rose-red, which is really good to align with the bottom edge of the yellow paper. An arch appears in the middle. With keys.

4. Tear off 2 spikes at one end of the lantern, then tear off the yellow double-sided tape and stick it together, and the shape of the lantern will come out.

5. Finally, glue a suitable handle, and this lantern is ready to go.

The simple way to make children's lanterns is as follows:Materials to prepare: glasses, yellow and white choppy paper, double-sided tape.

Operation steps: 1. First prepare the materials and tools, which are glasses, yellow and white Gaochang colored paper, and double-sided tape.

2. Paste the white paper on the glass with double-sided tape first, and then fold the yellow paper in half and cut it into a section at the edge of the fold, taking care not to cut it.

<>4. Then roll the right side of the left spring button into a package. Glue the upper and lower ends together with transparent glue.

5. Then use double-sided tape to paste the yellow paper on top of the glass.

6. Finally, you can put candles in the glass, so that it becomes a simple lantern.

1. Prepare colored paper, glue sticks, small scissors, and colored pens.

2. First use scissors to cut a rectangular strip of paper from the colored paper to make a lantern, fold the rectangular paper in half and fold it into a narrower double-layer rectangle.

3. Fold the rectangle up and down in a short section and then open it, and use small scissors to cut all the parts below the fold into thin strips.

4. Open the paper, smear the glue stick on the left and right ends of the paper, glue the two ends together, glue it into a cylindrical shape, and then use scissors to cut a slender strip and a wider strip of paper from the colored paper, stick the slender strip of paper on both sides above the lantern, as the handle of the lantern, cut the wider strip of paper into a thin strip of paper below, as a lantern tassel, smear the glue stick above the lantern tassel, and stick it under the lantern.

Flower lanterns, also known as lanterns. The lantern is a traditional Han folk handicraft that originated in China [1], in ancient times, its main function was lighting, from paper or silk as the outer skin of the lantern quietly this, the skeleton is usually made of bamboo or wooden strips, and a candle or light bulb is placed in the middle to become a lighting tool. Influenced by Han culture, lanterns are also quite common items in temples in many countries in Chinese areas of Asia.

Types of lanterns. Chinese lantern is a variety of techniques, a variety of crafts, a variety of decorative techniques, a variety of materials to make a comprehensive art, there are a wide variety of lanterns, there are dragon lanterns, palace lanterns, yarn lanterns, basket lights, dragon and phoenix lanterns, angular lamps, tree lamps, ceremonial lanterns, mushroom lanterns, etc., the shape is round, square, cylindrical, polygonal, etc.

1. Dragon lantern, also known as "dragon dance", is one of the Chinese folk lighting and dance forms, popular in many places in China. There is a dragon's head in front of the dragon lantern, and the number of middle nodes of the body varies, but it is generally singular, and there is a stick under each section to support it. The candles that burn inside each section are called "dragon lanterns", and those that do not burn candles are called "buron".

When dancing, one person holds the colored beads to play the dragon, the dragon head rotates with the beads, and many other people each lift a section to follow, up and down, turn left and right to dance, and match with gongs and drums, it is very spectacular.

2. Palace lantern is a world-famous special handmade lantern art in China. The palace lantern is mostly made and used by the imperial palace and the government, so it has this name. The earliest surviving palace lantern is the Ming Dynasty palace lantern in the collection of the Palace Museum.

The production of the palace lantern is very complicated, mainly using carved wood, carved bamboo, and carved copper as the skeleton, and then inlaid with gauze silk, glass or horn pieces, on which various auspicious and festive themes such as landscapes, flowers and birds, fish and insects, and people are painted. The Shangpin palace lamp is also embedded with jade or white jade. The shape of the palace lamp is very rich, there are many varieties such as quadrangular, hexagonal, octagonal, round beads, flower basket, square sheng, double fish, gourd, plate length, mugwort leaves, glasses, rings, etc., especially represented by the hexagonal palace lamp.

In 1915, the Beijing Palace Lantern was first exhibited at the Panama International Exposition, won the gold medal, and was internationally acclaimed. Subsequently, the palace lamp gradually developed in the direction of practicality, and various chandeliers, wall lamps, table lamps and poke lamps appeared. China's palace lantern production is most famous in Beijing.

3. The marquee is a unique ornamental lantern in the art of lanterns, and its reputation has spread all over the world, with Guangdong marquee as the best.

There are two methods: one is to make lanterns by hand; The second is to make lanterns out of cardboard.

First, the method of hand-making lanterns.

1. Material selection: iron wire, plastic tubes (straws for sucking drinks) or bamboo and wood strips, colored stupid sun paper or rice paper, etc.

2. Cut: cut the straw or bamboo strip to the required length, depending on the size of the lantern. If you use iron wire, you can directly fold it into your favorite shape.

3. Tie the skeleton: use single-sided adhesive paper to tie the intercepted materials into the skeleton of the lantern.

4. Make the lamp body: use colored paper and rice paper or sprinkle gold rice paper to cut it into the length and width of the lantern skeleton, and then you can design the pattern by yourself. Calligraphy, painting, paper cutting, you can do it.

After pasting, you can also use narrow strips of imitation silk paper to edge up and down, which looks more elegant, much like an ancient palace lamp.

5. If you are not very good at calligraphy and painting, you can find some of your favorite paper-cut patterns, use a piece of thin paper to trace them on the copybook, and then use scissors or knives to carve them out, use white rice paper to make the lamp body, and paste the paper-cut patterns on it.

2. How to make lanterns with cardboard.

1. Material selection: choose color cardboard, generally use red and yellow, and cut the appropriate size of the paper.

2. Carving: carve your favorite pattern on the cardboard.

3. Modeling: Fold the carved cardboard into square, hexagonal and other shapes as needed.

4. Install the lamp: find a small lamp bead (or LED lamp) to connect the battery and switch, and you're done.

1.Preparation materials: 1 piece of red and 1 yellow drawing paper, 1 pair of scissors from Anling Li Qingquan, 1 stapler, white latex or glue stick.

2.Fold the red paper horizontally in half, and use safety scissors to cut the red paper at an equal distance from the folded area.

3.Fold a small portion of the yellow paper horizontally and tear it off, roll up the remaining paper along the long side, and hold the teacher or parent with a stapler to fix the opening. In order to make it easier for young children to operate, the stapler at this step can also be replaced with white latex or glue sticks.

4.Coat the two long sides of the cut red paper with white latex and roll them up around the yellow straight tube as shown in the picture below.

5.Here's what it looks like.

6.Paste a slender strip of red paper to make the lantern handle, and the colored paper lantern is made.

Expansion: Flower lanterns, aka"illumination" "lantern". It is a cultural product of the era of traditional agriculture in China, which has both life function and artistic characteristics.

The lantern is an important entertainment culture of the Han nationality for thousands of years, it rewards the gods and entertains people, it has the function of "Wu opera" to reward the gods, and has the value of entertaining people, and is the treasure of the folk culture of the Han nationality.

The lantern originated from Emperor Wu of the Han Dynasty on the fifteenth day of the first lunar month in the palace to worship the most noble sun god of the gods at that time. After Buddhism was introduced from India to Middle-earth, due to the combination of Taoist immortalism and Buddhism's devotion to the Buddha, every fifteenth night of the first lunar month, the city and countryside are brightly lit, and the common people of the scholars all hang lamps, forming a unique custom of combining Chinese and Western cultures.

The steps for elementary school students to make lanterns are as follows:Materials required: colored paper, scissors, double-sided tape.

1. Find your favorite color in the colored paper.

2. Then draw a line with a brush on the top piece of paper.

3. Next, crop.

4. Cut the colored paper into four parts.

5. Use colored paper to make some sticks.

6. The lantern was made into a noisy section of the mountain.

The process of making small lanterns is as follows:Material preparation: 12 New Year's red envelopes.

Operation steps: 1. First prepare 12 red envelopes.

2. Seal the mouth of the red envelope.

3. Fold the red envelope in half along the long midline.

4. Fold in half along the short and middle line.

5. Fold the red envelope into two corners facing up and two corners facing down.

6. Fold the corner of the red envelope upwards with a stapler for two usestaplers.

<>8, connect the six red envelopes that the old waiter ordered to order. So that the upper part of the lantern is done.

9. Use the same method to make the lower part of the lantern.

10. Then the upper and lower parts are brightly pinned in the form of diagrams.

11. Now the main body of the small lantern is done.

12. Add a red thread above the red envelope to hang on.

13. Now the little lantern is done.

Here's how to make a lantern:

1. Preparation of metal materials

A lot of steel rods and thin wires are used to make lanterns, and most of these wires are bent and need to be straightened before use. The length measured in this way is more accurate, and the shape of the production is more regular, generally the wire is straightened with a wire drawing machine, one end of the rolled iron wire is fixed on the steel cable of the wire drawing machine, and the other end is tied to the fixed iron pile, when the motor is opened, the iron wire rotates with the turntable of the motor, and is mechanically straightened.

The straightened wire can be cut into a suitable length and length according to the size requirements of the design when making the lantern.

2. The production of the skeleton:

Metal is used as a material to make lanterns. It has the advantage of making the skeleton structure firm and not easy to deform, but because the metal material itself is very hard, it is difficult to carry out simple manual operation, and the material must be processed by machinery. The tools you see now are also processing devices made by folk craftsmen based on their practical experience.

When making, the iron wire is placed between two rows of fixed iron nails, and the iron plate on the right hand side is rotated, so that the iron wire can be bent into various shapes of iron wire components. After the required components are completed, they will be welded up to become the skeleton of various shapes of lanterns, for the simpler modeling, the components used are some relatively regular graphics, as long as the dimensional accuracy of each part is controlled, the same batch of products produced can be consistent, and assembly line operations can also be realized.

But for some more complex skeletons, like the shape of this fish, it is more complicated, the wire components are not regular graphics, and the curvature of each part is not the same, if you want to make in batches, assembly line operation, you need to use the model to complete, the method is: according to the design pattern, make a standard skeleton, use it as a model to copy other skeletons in batches, and lay the iron wire on the model in turn according to the winding method of the iron wire on the model, and weld it up at the corresponding contact.

In this way, the outer layer of the model can be applied to construct a similar lantern skeleton.

In order to separate the copied skeleton from the model, after the welding place is fixed, the wire on the newly welded model is cut along the main skeleton of the model in turn, and then the newly made skeleton is taken out from the old model, and finally the separated skeleton is welded together, so that the replication of the lantern skeleton is completed. This method is relatively complex and seems to be troublesome, but it can maintain the shape of the lantern well, and is mainly used in the batch processing of more complex lantern skeletons.