What is memory How do you look at memory data? How do I adjust the lack of memory?

What is the report number.

Note: When scrubbing the gold finger, be sure not to touch the gold finger directly with your hands, because the sweat on your hands will adhere to the gold finger, and after using it for a period of time, it will cause oxidation of the gold finger again, and the same fault will occur repeatedly.

However, there are several other reasons for this type of memory alarm:

1.The memory is not compatible with the motherboard.

Plug the memory into other motherboards for stable and reliable operation for a long time; Plugging other memory into the faulty motherboard also runs reliably and stably, and there is no warning of the silver alarm. But when the two are put together, there will be a "didi" alarm sound. Such failures can only be resolved by replacing the memory.

2.The motherboard's memory slots are of poor quality.

It is manifested as a "Didi" alarm sound when replacing multiple brands of memory, and occasionally a certain memory does not alarm, but it may alarm again after shutdown and restart. This kind of fault mainly appears on the low-grade motherboard of two or three hundred yuan, the reason is that the motherboard is low, and the quality of the memory slots used is also poor, so it can only be solved by replacing the motherboard.

3.A memory chip is faulty.

This kind of fault is relatively serious, and the host can find that there are error defects in the memory during the boot self-test, and cannot pass the self-test and send out an alarm sound of "Di Di" to prompt the user to check the memory. This kind of failure requires plugging the memory into another host and checking if there is the same "tick-tick" sound. If there is, it can be concluded that there is a memory problem; If not, it may fall under the first or every second reason above.

4.Other faults make the memory alarm.

This kind of fault is not common, it may be a motherboard failure or CPU failure, causing memory alarms, which can only be replaced one by one by the elimination method.

How to memory model, manufacturing date, serial number, access type, access speed, memory timing, etc. Here's what I've put together for you on how to check your memory. Hope it helps.

Method steps

3 In the memory panel, only physical memory, total amount of virtual memory and usage information are displayed.

Of course, it's good to have a larger memory, you can run more and larger programs or games, there is no standard for enough memory, I personally think that the memory is smaller, just operate according to the method of small memory, such as your memory is small, and you can start multiple programs at the same time, open more games. The system will be overwhelmed, then you can play a small game or open fewer programs to solve the problem, I mean the configuration of the computer, the size of the memory, depending on your personal use of the computer.

If you want to set the size of the virtual memory, there are certain criteria.

Set up virtual memory according to the method of Microsoft Certified System Engineer Liu Ansong, and set it up as follows:

How to set up virtual memory: Right-click on My PC Properties Advanced Performance Settings Advanced Changes in Virtual Memory Select a custom size, set to twice your physical memory at both the initial size and the maximum value. If your chain memory is 512MB, set both the initial size and the maximum to 1024MB.

After setting, you need to press the "Settings" button, and then press OK and Apply, and re-start the computer to take effect (there is no fixed number to set the size of the virtual memory, and the size can be adjusted.) For example, if your memory is small, the virtual memory can be set to be "three times" larger, the physical memory is 2G larger, the virtual memory can be set to a smaller point "double", or you can not set the virtual memory, because if the virtual memory you set is small, the system will remind you that the setting is large and wastes system resources).