-
There are a lot of them on the Internet, so I'll take a paragraph for you. "Check the condition of the vehicle, such as the fuel gauge, tire pressure, lights, brakes, etc., but also check the spare parts, such as fault triangles, jacks, spare tires.
First, check the amount of fuel.
Cars are driving at high speeds, and fuel consumption is higher than expected. For example, a car with 10 liters of fuel per 100 kilometers per hour consumes 10 liters of fuel when traveling at a speed of 50 kilometers per hour, while driving 100 kilometers per hour at 100 kilometers per hour on the highway will consume about 16 liters of fuel. Fuel consumption increases significantly at high speeds, so it is important to be well prepared for fuel at high speeds.
Second, check the air pressure of your tires.
When the car is driving, the tire will produce compression and expansion, that is, the so-called tire deformation, especially when the tire pressure is low and the speed is high, this phenomenon is more obvious, at this time, the abnormal high temperature inside the tire will produce the separation of the rubber layer and the covering layer, or the phenomenon of the outer tread rubber breaking and scattering, etc., and cause a puncture, vehicle accident. Therefore, the air pressure of the tires is higher than usual before driving at high speeds.
Third, check the braking effect.
The braking effect of the car plays a pivotal role in driving safety. When driving on the highway, you should pay more attention to the braking effect. Before departure, you should check the braking effect at low speed, and if you find any abnormality, you must repair it, otherwise, it is very likely to cause a major accident.
In addition, the inspection of some parts such as engine oil, coolant, fan belt, steering, transmission, lights, and signals should not be ignored. ”
The basic focus of the above is on long-distance high-speed, say a few words alone, mainly pay attention to rest before high-speed, and familiarize yourself with the navigation route first, because many times you have to change the line in advance, and the navigation is turned on in advance. When considering fuel, pay attention to congestion.
-
The construction of highways must be prepared, especially the construction of highways that have a bearing on the national economy and the people's livelihood, and it is necessary to make a lot of careful preparations before construction can begin. A stage before the official start of the highway engineering project can be called the early stage of the project. The early stage of the project is very critical, under normal circumstances, the content involved in the preliminary work of the project is more complex, including more parts, mainly need to carry out global research on the proposed highway project, regional overall planning, the implementation of construction land standards, whether the funds are in place, the writing of specific project proposals, the submission of the pre-feasibility study report, the preliminary design and review of the project, the means of project bidding, the review of construction drawing design, etc., any link is related to the smooth and progress of the project. Only by doing a good job of a series of work before the start of construction can we start construction.
The preliminary work of the expressway engineering project involves more content, and it is necessary to comprehensively deal with the content angles, reflect the essence of the project from multiple aspects, and when carrying out preliminary preparations, the specific content is as follows: the preparation and approval of the project feasibility study and project proposal; Comprehensively do a good job in the approval of the planning department's project planning and site selection opinions, and form written materials; Coordinate the approval of the pre-examination opinions of the land department in charge of the construction project; Do a good job in the assessment of the risk of geological disasters at the construction site; Handle the approval of the specific content of the soil and water conservation plan in charge of the water conservancy department; Coordinate and liaise with the environmental protection department to coordinate the project's approval of the environmental impact report; Submission of engineering feasibility study report; The agricultural land conversion plan and land acquisition plan must be provided with supporting evidence for approval; For the relocation of pipes, wires and cables at the construction site, only by making comprehensive preliminary preparations can we start construction with complete documents and ensure the smooth progress of highway construction.
-
In addition to the pre-feasibility report and engineering feasibility report of the highway engineering project, it mainly includes the project application report, planning and site selection opinion, project land pre-examination, environmental impact and radioactive environmental impact assessment, flood control assessment, geological disaster assessment, overburden deposit inquiry, cultural relics investigation, disaster assessment, forest land occupation assessment, river navigation assessment, etc. The evaluation and demonstration work is mutually restrictive in terms of time arrangement, and it takes a long time to complete the evaluation and approval work, so in order to save time, it is necessary to coordinate and optimize the arrangement.
-
The content and process of the preliminary work of highway construction.
First, the preliminary work content of the expressway.
The preliminary work of the expressway project refers to the approval of the feasibility study report of the project.
The work of the approval stage includes the preparation of the feasibility study report of the project and the preparation of a series of supporting reports such as environmental impact assessment, land pre-examination, energy conservation assessment, soil and water conservation, mineral compaction, geological hazards, project site selection opinions, cultural relics survey, safety assessment, biodiversity assessment of ecologically sensitive areas, energy conservation assessment, social stability risk assessment, project financing plan, etc., as well as the approval work carried out by relevant departments. There are 9 national highway projects approved by the state and 5 approved by the province; All 14 work contents of the provincial expressway project are approved in the province.
-
Hello dear, the preliminary work content of the expressway: the preliminary work of the expressway project refers to the work of the project feasibility study report to obtain the approval of the Jiechang key section, including the preparation of the project engineering feasibility study report and the environmental impact assessment required for the project establishment, land pre-examination, energy conservation assessment, soil and water conservation, mineral overlay, ground attack and quality disaster, project site selection opinion, cultural relics investigation, safety assessment, biodiversity evaluation of ecologically sensitive areas, energy conservation assessment, social stability risk assessment, Preparation of a series of supporting reports such as project financing plans, as well as the approval work carried out by relevant departments.
-
Toll Department, Inspection Department, Monitoring Center, Security Department, Road Management Department, Logistics Management Department, etc.
The toll department is mainly responsible for the collection of tolls, the inspection department supervises and inspects the daily work of the toll department, the monitoring center is responsible for guiding and recording various special situations and data statistics in the daily toll collection work, the security department is responsible for the security inspection work of the station area, the road is the daily inspection and maintenance of the road surface, and the logistics department is responsible for the canteen and sanitation work.
-
1. Charging personnel, including on-the-job fees, tickets, and internal administrators;
2. Highway administration personnel, including patrols, obstacle clearance, supervision, and internal industry administrators;
3. Maintenance personnel, including road condition inspection, emergency repair and rescue, and internal industry administrators;
5. Monitoring personnel, including information services, mechanical and electrical maintenance, internal management personnel 6, administrative management personnel and general staff.
The highway industry is dominated by these jobs.
-
Which position is better on the highway? There is a future for the development of the future, I am male, and it is an easy position.
Hello, it's a pleasure to touch your question. It is very good to tell the highway toll collector, it is a relaxed post, and sit there to talk about the issuance of high-speed cards to vehicles, toll collection, etc. If you sit for a long time and perform well, you can be a manager, and no matter what position you work in, hard work will be rewarded.
Theoretically speaking, it should be done according to the technical specifications for subgrade construction. However, if you can find an elevation datum point over a short distance, I think you should be more flexible in segmentation. For example, there is an elevation datum point on 0+000, and there is also a datum point near 0+980, so that the adjustment can be carried out on this segment with higher accuracy. >>>More
In order to further improve the efficiency and service level of toll roads, and facilitate the rapid travel of the masses, a plan has been formulated on issues related to the exemption of tolls for small passenger cars with 7 seats and below during major holidays. >>>More
When encountering emergency avoidance on the highway, it is necessary to pay attention to: 1. Take braking and deceleration to make the vehicle stop or travel at low speed before the collision to reduce the degree of collision damage; 2. Hold the steering wheel tightly and avoid turning the steering wheel sharply. The way to drive safely on the highway is: >>>More
You make it possible to copy your composition.
First, the definition is different.
Expressways in a broad sense include expressways in the transportation fields such as roads, railways, and waterways. Expressways in the narrow sense are referred to as expressways, which often involve intercity expressways and urban expressways, the latter being important roads in cities with higher speeds for long-distance transportation. >>>More