How to set up Tengda WiFi signal amplifier

How should Tengda wireless router be set up?

1. First turn on your phone, find "Settings" on the desktop of your phone and click to enter.

4. After entering the setting interface of Tengda amplifier, select the name of the signal that needs to be amplified in the list.

5. Enter the password of the amplified signal, then check the option "The wireless name of the extender is the same as the superior wireless signal", and finally click "Finish".

6. After the Tengda amplifier is set, it will be automatically connected to the original wireless router at this time.

The main principle of Tengda amplifier is to accept the wifi signal, and then transmit the wifi signal again. If the wifi signal in the most remote room of the house is unstable, often only one or two bars of signal, then you can install a Tengda amplifier in the room, so that the wifi signal can cover the whole room.

Hello, dear, the first step is to connect the amplifier signal to connect your wifi amplifier to the power supply, at this time the amplifier will emit a default wifi signal, so that your mobile phone is connected to the default wifi signal of the amplifier. Important tips for the wireless signal of the mobile phone connected to the amplifier: (1) The default wifi name of some wifi boosters can be viewed in the label at the bottom of the amplifier.

2) After the mobile phone is connected to the default wifi signal of the amplifier, there will be no Internet connection, which is policy, don't worry. At this time, the mobile phone can only open the setting interface of the amplifier, and any other web pages cannot be opened. Step 2, set up amplified wifi signal 1, in the bottom label of the wifi amplifier, first look at the setting of this amplifier **.

The parameters behind the management page, web address, login address, etc., are the settings of this amplifier**. 2. Then in the browser of the mobile phone, enter the settings you saw in the previous step**, and you can open the settings interface of your amplifier - according to the prompts on the page, first set an administrator password for the amplifier. Tips for setting an administrator password:

For different manufacturers of wifi amplifiers, open the setting interface, the specific setting parameters are different, please set accordingly according to the prompt information in the settings page of your own amplifier. 3. The wifi amplifier will automatically scan the nearby wifi signal, wait for a while, and in the scan result, select the wifi name you need to amplify - and then enter its wifi password. Select the wireless signal that needs to be amplified, enter the password of the amplified signalImportant:

1) Some WiFi amplifiers do not support amplification of 5G signals; So, if you need to amplify a 5Gwifi signal, make sure your amplifier supports 5Gwifi signal amplification. (2) If you can't find the wifi name you need to enlarge in the scanning results, it may be that the amplifier is too far away from the router and can't receive the wifi signal from the router, you can try to reduce the distance of the router and amplifier, and then try again. 4. According to the prompt information on the page, observe the status of the indicator light, so as to judge whether the setting is successful.

According to the prompts on the page, observe the status of the indicator in the third step, adjust the position of the amplifier, please do not put your wifi amplifier directly in the original position with a bad signal; If it is directly placed in the original place where the signal is not good, the stability and network speed of the enlarged WiFi will be greatly affected. The best place to place the wifi amplifier is: the original area with a bad signal, the middle position between the two points of the router.

1. First of all, plug the TP-Link signal amplifier (wireless extender) into the socket at home, it should be noted here that the wifi signal amplifier can not be placed horizontally or upside down, the two antennas should be upward, after insertion, the extender will automatically start, and the indicator light is red.

2. Open the wifi option in the mobile phone settings to find the wifi and find the wifi name of the tp-link signal amplifier (wireless extender).

3. TP-Link signal amplifier (wireless extender) will automatically open the login window, if the login window will not pop up, you can enter its login in the mobile browser**.

4. Then the TP-Link signal amplifier will automatically search for the router wifi signal, and click the name of the router wifi that needs to be extended in the searched router wifi signal.

5. Then set the login name and password of the TP-Link signal amplifier.

6. Then the TPLink wireless extender will automatically connect to the router for the extension signal, the indicator light of the extender will keep flashing, and the indicator will be displayed as solid green or solid orange when the connection is successful, if it is solid red, then it means that the extension has failed and needs to be set again.

7. The indicator light of the expander is solid green, indicating that the expansion is successful.

Tengda A12WiFi signal amplifier has the right and left of the relay WiFi signal, which can expand the WiFi signal strength at home, so how to set up the Tengda A12WiFi signal amplifier? Let's take a look.

Step 1: Use your mobile phone to connect to the wireless signal of the A12;

Step 3: Select the name of the upper wireless signal, enter the upper signal password, set the wireless signal password of A12, and complete the expansion;

On the sticker of A12, there is the wireless signal name of A12, and there is no password in the factory state.

After entering the upper signal password, if the wireless signal name and password of A12 are consistent with the upper level, please check "The wireless name and password of the extender are consistent with the upper wireless signal", which is checked by default; Otherwise, cancel this check box and set the wireless signal name and password of A12 separately. Click "Done" to expand;