After the computer reinstalls the system, a black screen appears with the English letter 10

Do you know what to do if the computer boots up with a black screen in English?

Summary. Dear,This is not affected,Restart the computer first,Then plug in the USB flash drive to operate。

When the computer reinstalls the system, the power is off, and after restarting, there is only a black screen of English letters, what should I do?

Dear,Hello,About what English letters came out after the computer was reinstalled and powered off?,It's convenient to take a screenshot to see?。

This black screen is not reflected on the plug-in? How do I install the system?

Dear,This is not affected,Restart the computer first,Then plug in the USB flash drive to operate。

Plug in the disk or black screen plus two lines of English letters.

After win7 installs the system, there may be a black screen and display English letters, which is generally caused by the following reasons:1System installation errors, loss or corruption of some system files; 2.

The graphics card driver is incompatible or corrupted; 3.The boot boot of the system is corrupted by a virus; 4.Hardware failures, such as memory or hard drives; 5.

Reinstall the system and make sure there are no errors during the installation process; 2.Update the graphics card drivers, or uninstall the current driver and try to install the appropriate driver for your computer model; 3.Enter safe mode and scan the system with anti-virus software; 4.

Check if there is a problem with the hardware, you can airlift to try to replace the memory or hard disk, etc.; Ant Void 5Check if there is a problem with the monitor or signal cable, and check whether the interface is securely connected. If none of the above methods work, it is recommended to consult relevant technicians or send the computer to a professional after-sales service center for repair.

Summary. After powering off, remove all external devices except the monitor, and only keep the display device for testing to see if it can enter the system normally. If it still doesn't work, move on to the next step.

How to solve the problem of black screen English letters when the computer is turned on?

Hello dear, it is a pleasure to serve you. Dear, hello, may I ask which string of your English letters**?

If yes, the cursor flashes in the upper left corner or error 1962

After powering off, remove all external devices except the monitor, and only keep the display device for testing to see if it can enter the system normally. If it still doesn't work, move on to the next step.

After restarting the machine, click the F12 key on the keyboard, select the hard disk to boot, if you can enter the system normally, restart the computer again, click the F1 (F2 for some models) button continuously to enter the BIOS, find the Startup or Boot menu, select the Primary Boot Sequence option, and press"+"or"-"key to adjust the hard disk to the first boot item.

If you still can't solve the black screen problem, or the hard disk cannot be detected or the system cannot be entered, you can only try to remove the hard disk, connect to other hosts for testing or enter the PE system to back up the data, and then reinstall the operating system.

Another situation is that the boot prompts a DHCP error.

When the computer is turned on, a string of English letters is displayed on the screen, and the last line shows DHCP...., that's basically because the network boot is turned on.

1.After restarting the computer, click the F1 key on the keyboard continuously, enter the network setup menu under the BIOS and find the devices option, change the following boot agent to disabled, press the F10 key to save, press the enter key to confirm, and wait for the machine to restart.

2.Laptop users can click the F2 or FN+F2 key to enter the BIOS after booting, find the Boot option under the BIOS, change the PXE Boot to LAN option to disabled, press the F10 key to save, and press the Enter key to confirm the restart.

The remaining one is to display fan error, fan error is the problem of the machine fan, it may be that the machine has been used for a long time, and the dust accumulated by the CPU fan or foreign objects causes the fan to not rotate. Desktops are more convenient to solve, notebook users should be cautious!

Do you know what to do if the computer boots up with a black screen in English?

1. This phenomenon means that the system files are lost or damaged, and the system should be restored before it can be started.

2. The method of system recovery is to press and hold the F8 key after restarting, open the boot menu, and select the latest normal boot item. You can resume the boot.

3. If this method fails to start the computer successfully, it means that the system is seriously damaged and the system needs to be reinstalled.

4. If the motherboard battery is out of power, this phenomenon will also occur. Let's get a new battery. Note: To update the battery, you need to turn off the power, then unplug the outlet, and then remove the battery.

Do you know what to do if the computer boots up with a black screen in English?

The computer appears reboot and select proper boot device, which means: reboot and choose the correct boot device, which means that at the time of booting, the computer does not have a suitable boot device, which has several possibilities:

The first is when the computer is booted up, a USB flash drive or other device is plugged into the computer.

The second is that there is a disc in the optical drive.

The third possibility is that the data cable of the hard disk interface is loose.

The fourth possibility is that the hard drive is broken.

There are the following countermeasures for those four situations:

Make sure there are no discs in the optical drive; Make sure you don't check USB sticks or other peripherals; Set the first boot to hard disk boot; Check the hard disk interface data cable (desktop); If the hard drive is broken, you have to replace it.