What happens if the toilet suddenly doesn t go to water, what happens if the toilet doesn t go water

There are many reasons why the toilet can't pump water. In fact, it is very simple to investigate, and follow the flow to find it. You can perform the following steps:

First, open the main valve [also called the angle valve] to determine whether there is tap water.

Second, open the lid of the water tank and observe that there is no water on the water tank. Whether the piston can be plugged. If you can't plug it, it will leak, and the water tank is not up to the switch, so you won't get on the water.

The toilet tank fittings are divided into three parts. The first is that the drain valve is directly below the button, and the second is the inlet valve, which is the part of the hose connected to the outside of the water tank, which is generally next to the drain valve. The third part is that the buttons are divided into full-row buttons and half-row buttons.

Third, cover the toilet lid, check whether the button can reach the inlet valve, if it is, adjust the inlet valve to the orientation, and then see if the float or float of the inlet valve moves up and down freely. If you get stuck, the water won't get in. Generally, there are adjustable crosseyes on the pontoons, and you can twist them in a clockwise direction to see.

If the float is suspended in the air when there is no water, it means that it is broken and the water inlet is blocked.

Fourth, fill the water tank with water to see if the pontoon can float freely. If the problem of water inlet is solved. Then there is the problem of drainage, which is also the problem of flushing. See if the plug of the plug in the tank, also called the float, is damaged. Whether the float and button connection are loose. If it is loose, it can be tightened.

Fifth, check if the button is elastic. It is easy to rust when the spring enters the water for a long time. The working principle of the toilet is nothing more than pumping--- storing water --- releasing water. Just a few things step by step.

1. What should I do if the toilet does not automatically fill the water?

If the toilet does not automatically fill the water, the lid of the water tank should be removed for inspection, to see if the toilet lid will be pushed to the water inlet valve in the state of the cover, and if it will be topped, you only need to adjust the orientation of the water inlet valve to solve it, and then check whether the water inlet valve float moves up and down freely, if it is stuck in the state, it cannot be automatically watered, at this time, you need to rotate and adjust the height of the float through the cross eye.

Second, how to choose a toilet.

1. Touch the toilet pipe mouth.

The toilet bowl is well done in the details, especially the location of the toilet drain pipe mouth, if the glaze quality is not good, it has a direct impact, and it will be easy to have the problem of toilet blockage, so when choosing, you can touch the toilet pipe mouth and the inner wall of the toilet pipe by hand, if it is smooth, it means that there is glaze, if it is rough, you can not buy.

2. Check the weight of the toilet.

Generally speaking, the toilet has a certain weight, because of the relationship between the density of the toilet, the overall weight is not low, generally speaking, the weight of the ordinary toilet is about 25 kg, take a look, if it is lower than this weight, the quality can not be guaranteed.

3. Look at the number of sewage holes.

Now the toilet drain hole is divided into single hole, double hole and 3 hole, and the best single hole is the best choice, because the more drain holes, the more impact on the impact force, so the more expensive toilets on the market are single hole.

What should I do if the toilet doesn't go to water? Teach you a few tips: I don't know if you are a new tank or an old one, there are many reasons for not getting water, mainly because there is a problem with the water supply system.

1.The ball floats too low, and the water doesn't go up much before it touches the water valve to stop the water supply, and the solution is to raise the screw of the contact to the water level you want, and the ball floats too high while raising it until you are satisfied. 2.

If you don't open the water supply door, there is a water door under each water tank, and the water tank that has just been installed will not be watered if you forget to open the door. Just open it. 3.

The contact screw at the top of the water level lever of the water tank used for a long time is rusted, and the function of the top pressure water valve is lost, and the water cannot be lifted so that the water cannot flow. 4.The water pressure is not enough, the flow is not enough to cause the water to stop, the solution is to increase the water volume, the main water door is completely opened, if the pressure and water level can not be increased, it is necessary to find the municipal water supply company to solve.

You can try it in the above ways, or it is recommended to find a professional master to help you test it. It shouldn't be expensive.

Summary. If it's just slow to get on the water, it's blocked by dirt, you can clean it, if it's not up to water at all, you need to repair it That is the pipe inside is blocked.

Hello, let me ask you your questions, thank you for your consultation 1. The lever or float of the water supply component in the toilet tank is stuck after attaching the lead file dirt, and the water inlet valve cannot be opened; 2. There are foreign objects blocked at the water inlet, and no water can enter; 3. The filter screen at the water inlet is blocked by sediment, dirt and other acacia blockages, and water cannot be entered; I hope mine can help you, and I wish Hengdou a happy life!

If it's just slow to get water, it's blocked by dirt, you can clean it and leak it, if you don't put water on it at all, you need to repair it The combustion volt is blocked inside.

Many families will have problems with the toilet, and there will be no water in general, and there will be blockages. If there is a problem with the toilet, it must be solved in time, so as not to affect the normal life, what is the problem with the toilet not being watered, and you must know what causes the water not to be watered, so as to solve this problem in a targeted manner.

1. The water pressure is too low.

Nowadays, toilets are flush toilets, and if the water pressure is too low, it is difficult to get water. The low water pressure may be caused by the high floor of the house or the overall water pressure of the community, or it may be caused by the water pressure being too low due to the water valve being opened too small.

2. There are impurities in the water.

If there are some impurities in the water of the toilet tank, it is also difficult to get water, so it is necessary to replace the water parts of the toilet. Therefore, it is best to put water before installation to eliminate impurities, which are rarely due to poor water quality in the area.

3. The triangle valve is blocked.

If the triangle valve is blocked, the toilet can not be watered, you can disassemble the triangle valve to see if the connection with the inner wire is blocked, to see whether the valve core is open and closed, etc.

4. The float is broken.

If the toilet is not watered, you can first open the lid of the toilet tank to see if the float in the water is used normally, generally when there is no water in the tank, it will sink to the bottom, otherwise the float is broken, and the float can not sink will cause the water outlet to be closed, so that the water is not on the water.

What's going on with the toilet not going down?

The problem of the toilet not flooding may be that the water pressure is too low, or it may be that the triangle valve is blocked or the float is broken.

1. The water pressure is too low. Nowadays, the toilets are all pumped toilets, and if the water pressure is too low, it is difficult to get water. The low water pressure may be caused by the high floor of the house or the overall water pressure of the community, or the water pressure may be too low due to the water valve being opened too small.

2. Triangle valve pluggingIf the triangle valve is blocked, the toilet can not be watered, you can disassemble the triangle valve to see if the connection with the inner wire is blocked, to see whether the valve core is open and closed, etc.

3. The float is brokenIf the toilet is not watered, you can first open the lid of the toilet tank to see if the float in the water is used normally, generally when there is no water in the tank, it will sink to the bottom, otherwise the float is broken, and the float can not sink will cause the water outlet to be closed, so that the water is not on the water.