-
can live. Cyclamen.
The leaves will all wilt away, as if they are dead, but they are not dead, and this state is also called "suspended animation".
The higher the temperature, the easier it is for the plant to enter the dormant period, and when the temperature drops, after the dormant period, it will grow new shoots on its own, and then take it to a sunny place to raise.
The origin of cyclamen is a legend.
In an ancient town, people had a Chinese New Year's Eve dinner on Chinese New Year's Eve.
Later, when the festival was celebrated with firecrackers, a beautiful woman suddenly appeared in the crowd, singing and dancing with people, not only singing and dancing beautifully, but also giving people beautiful accessories with her, and having a great time. Towards the end of the celebration, the woman quietly disappeared into the crowd.
Since then, she has appeared every Chinese New Year's Eve, and people believe that she must be a fairy in the sky, and later whenever this woman appears, people will call cyclamen directly! Later, there are many very beautiful and bright flowers that bloom here, and this kind of flower will bloom every Spring Festival, just like the six fairies always descend to earth during the Spring Festival, and people believe that this flower is changed by the six fairies, so this flower is called cyclamen.
-
Don't worry about the cyclamen wilting in summer, maintain it like this, and the flowering period will burst again!
-
Cyclamen begins dormancy in July and August, sows seeds in October, germinates in November, germination is slow, germination takes about 20-30 days, treated in the dark, can be covered with newspaper, otherwise, germination takes longer. It usually blooms in the winter of the second year.
Seeding propagation is one of the most common methods used by cyclamen to propagate. Cyclamen seeds are hand-pollinated, and the seeds usually ripen in May and should be harvested in time. Cyclamen seeds are larger, weighing around 1000 grains, and have a general germination rate of 85% to 95%.
In order to promote seed germination, seeds can be soaked and germinated before sowing, soaked in cold water for 24h or 30 warm water for 2 3h, and then the adhesive on the surface of the seed is cleaned, wrapped in a wet cloth to promote germination, maintain 1 2d temperature 25, and the seeds can be taken out and sown with a slight germination. The sowing time is generally in September and October, and it can be sown in ordinary pots.
Adult cyclamen bulbs usually bloom in early December and reach full bloom in the second year. To prolong the flowering period, it can be placed in a cooler place after flowering. After that, as the outside temperature rises, flowering gradually decreases by May, but varieties that bloom later can still bloom in June.
Because the northern region has a cooler summer, some varieties can bloom in summer as long as they are ventilated and shaded.
-
The planted cyclamen seedlings bud at the end of September, begin to bloom from the end of October to November, and continue to bloom until May and June of the following year, when the weather is hot, and begin to bloom in July and August. Cyclamen is generally planted in the cool autumn, sown in October, emerges in November, the emergence of seedlings is slow, about 20 to 30 days of emergence, protected from light, can be covered with newspaper, otherwise, the emergence time is longer. In summer, cool management, proper shading, avoid drought, ensure that the seedlings do not lie dormant, bud at the end of September, and bloom at the end of October.
It can also be sown in spring, sown in February, protected from light, and seedlings emerge in March. Avoid dormancy in summer and bud blooming in autumn. Sowing in spring, the growth period is short, the bulb is small, the growth point on the bulb is few, and the number of flowers is small.
Autumn sowing with large bulbs, many growing points and a large number of flowers. To avoid the dormancy of seedlings, one will affect flowering, and the other is that the bulb is too small, less nutrients, and many seedlings can not pass dormancy, resulting in dead seedlings.
-
1. Sowing: Collect seeds with full grains and quite healthy, there is a lot of water in the seeds that have just been picked, you need to put them in a cool place for 3-4 days to let the water dissipate by themselves, and then put the seeds in a sunny place to dry. The time of the god to quietly sow should be chosen between the beginning of autumn and the light snow of the sedan chair.
Before sowing, the seeds are soaked in water overnight, and after they are removed, they can be planted in the soil prepared in advance, and they will germinate after about a month.
2. Moisture: The soil in the pot has a little moisture, and it is not allowed to affect the germination of seeds with too much water.
3. Light: This kind of plant prefers to bask in the sun, as long as the sun's rays are not very strong and the temperature is 28, the plant can be placed on the balcony with blindness, so that it can be irradiated by the sun.
1. This kind of plant will grow in a place with good air circulation and grow very popularly, once the air condition is not good, the petals of the plant will be affected and wilted, but do not put the pot in the tuyere.
2. The temperature is at zero degrees and the plant will not be able to bear it and be harmed, and the plant will enter dormancy after the temperature exceeds 30.
3. When adding fertilizer to plants, do not use too much nitrogen-containing fertilizer, you can directly buy special fertilizers for such plants.
-
Cyclamen only grow leaves and do not bloom due to insufficient light, high temperatures and improper water management.
1. Lack of light: Cyclamen likes strong light, and if it is not enough, it will affect its normal growth and flowering.
2. The temperature makes the potato too high: too high the temperature will affect the flowering of the cyclamen, and the most suitable temperature is 15-28. If the temperature is too high or too low, it is easy to cause its long leaves to not bloom.
3. Improper water management: Cyclamen should maintain appropriate moisture, neither dry nor too wet. Over- or under-watering of the roots can cause them to grow unusually fast.
If your cyclamen does not bloom with long leaves, pay attention to the above conditions. It is possible to increase the time of sunlight exposure, control the temperature appropriately, and keep the roots moist but not too wet to improve the growth environment.
-
1. Improper fertilization. Cyclamen is a fertilizer-loving plant, but after June it should be stopped and watered less, otherwise it will continue to grow leaves, which is not conducive to the plant entering a dormant state;
2. The temperature is too high. Cyclamen is not tolerant of high temperatures, which can cause it to go into a dormant state. Plants above 30 degrees Celsius will stop growing and go dormant, and at 35 degrees Celsius, they will be prone to rot and death.
The suitable temperature for cyclamen growth is between 15 and 20 degrees Celsius.
-
1. Supplemental light.
If cyclamen is kept indoors for a long time, the plants are prone to grow long due to insufficient sunlight, and they will only grow leaves and not bloom.
Solution: Xianhe lead Kelai likes light, and needs sufficient light to make the plant grow healthily. Therefore, I need to move the cyclamen to a sunny place to maintain it.
2. Improper watering.
Although cyclamen needs to be watered frequently during the growing season, there are often flower lovers who overwater the cyclamen and cause water accumulation in the potting soil, and the plants grow leaves but do not grow flower buds.
Solution: If you want to make the cyclamen bloom, you need to control the amount of watering, in the early flowering stage, you need to keep the potting soil moist, but not waterlogged, and you need to reduce the watering after the biliang flower.
3. Excessive nitrogen fertilizer.
Nitrogen is a type of fertilizer that promotes plant growth, and if you give too much nitrogen to cyclamen, it will cause the cyclamen to grow its leaves.
4. Prune in time.
When a cyclamen only grows leaves and does not bloom, it means that the plant is growing vigorously and needs to be pruned properly.
Solution: The old leaves of cyclamen need to be cut off in time to retain nutrients for the extraction of cyclamen flower stems.
-
Cyclamen is a kind of flowering plant, generally in the autumn begins, it gradually continues to grow leaves, continue to grow buds, but many flower friends raise it just do not bloom, light leaves, what is the reason for this?
There are two reasons why cyclamen does not bloom, one is the lack of light, because cyclamen is also very fond of light, although he is afraid of strong light exposure, but if we give him enough light under the premise of not lacking water, it can grow well and bloom much, if it is placed in a dark environment, it will only grow leaves and not bloom. The second situation is due to improper fertilization, we know that any plant flowering can not do without fertilizer, but we use fertilizer with high nitrogen content for a long time, nitrogen fertilizer is to promote long branches and leaves, it will not differentiate flower buds, so keep cyclamen to remember, it has been growing and flowering, we have to fertilize with high phosphorus and potassium content, and other elements are not missing, so as to ensure that we get enough phosphorus and potassium, so that it can make more buds and leaves grow as usual.
These two reasons seriously affect whether the cyclamen will bloom, so it must be done well, usually maintained, and then to ensure adequate watering, you know, it lacks water The whole plant including the flower stem will wilt, once or twice after many times, its whole plant will grow very loose, and the flowers will open under the leaves, so we water it to control, and then water it when the leaves are slightly soft, do not water frequently, frequent watering will rot the roots, do not lack water, Lack of water can cause the entire plant to lodging and the capillary roots to dry up. When watering, you must remember to turn the pot and pour it from the edge of the pot, try not to pour it on his sphere, and try to water it at noon when the sun is good.
In this way, it can ensure that it is not short of water, normal growth, normal flowering, and one point is very critical, cyclamen its leaves and buds are very dense, must ensure good ventilation, ventilation is not good, the bottom will grow a layer of white hair, if this situation is serious, it will lead to rotten stems, rotten balls and rotten leaves, this is the simple maintenance method of cyclamen, the soil is breathable, the light is sufficient, the water to keep up, master the practice of the square volt you will be able to raise it, let it grow and bloom, It lasts until the onset of summer.
The fact that the soil barely absorbs water can be caused by: >>>More
This belongs to the server, I believe that your network speed will not be slow, your machine will not be bad. In this case, try not to team up with them.,To form the kind of player who can be added to the team immediately after clicking.,This kind of player who can't be grouped can be grouped a few more times.,But according to experience,It's often gradually stuck in the process of brushing.。
Symptoms of inattention may be caused by a psychological disorder. It is possible to lack confidence in doing things and often fail, in this case, we should pay attention to building self-confidence and willpower; Pay attention to relaxation and stress relief; Don't get overly tired; Don't get too caught up either; Pay attention to the combination of work and rest. Difficulty concentrating, or it can be caused by a nervous breakdown. >>>More
The reasons why the sandblasting machine only sprays sand may not produce sand may be as follows: >>>More
Caused by excessive stress.
Modern people are under too much pressure, most of their energy is focused on work, and they have no energy after work, so it is normal not to get pregnant. >>>More