How to distinguish iPhone headphones from fake

Updated on number 2024-03-23
4 answers
  1. Anonymous users2024-02-07

    1. Box. When opening the box, there is a transparent tape sticking to the outside of the box, and the tape should be clean and sticky, without traces of repeated pasting. The transparent lid of the imitation is very easy to open, while the ** one requires a little force to open.

    2. Gaps. Apple has adopted a one-piece molding process many years ago, coupled with excellent workmanship, the entire surface of the earbuds is absolutely free of rough, or even incompatible gaps. Carefully inspect the following edge joints, if there are such gaps, they may be imitations.

    3. Text. About 10 cm away from the socket, there is a line of extremely small text (be careful not to stare at it for too long when observing, as it may damage your eyesight). There is a space between the words "california" and "assembled", in China and the serial number "dtx." after itIn between, there are two spaces, and if you check these two places, you will find that the imitation is more or less empty.

  2. Anonymous users2024-02-06

    Identification method: 1. Pick up the iPhone earphones, and there are two vertical headphone jacks on each side

    3. Press and hold the four vertical headphone jacks with both hands, and you will find that the sound quality has changed and the bass is gone, then the earphones are real, and vice versa;

    4. If you feel that the sound quality change is not big enough, you can press and hold the vertical bar headphone jack on the top of the headphone head, each earphone has three vertical bar headphone jacks, block these six earphone holes, the bass will be gone, and the sound quality change will be quite obvious.

  3. Anonymous users2024-02-05

    Bus Digital】How to distinguish the authenticity of iphone6 plus earphones? Now I will share with you some ways to identify the authenticity of iPhone6 6 Plus headphones, if you don't know how to distinguish the authenticity of Apple headphones, it is necessary to take a look at this article.

    iPhone5 5S and iPhone6 headphones are the same, considering that the counterfeiting technology of profiteers is constantly improving, let's share a new iphone6 6 plus headset real and fake methods.

    1. The cable at one end of the iPhone6 high-imitation headset microphone is slightly longer, as shown in the figure. The headphone head at one end of the microphone is placed in the wire wrap box and twists half a circle clockwise, and the microphone can just be put in, then it is original. If it grows about 1 cm, it is a fake earphone.

    This method is just one of them, and it is possible to better imitate the length of the iPhone 6 earphone cable.

    2. Apple earphones have always been well-made, and the comparison details can see that the headphone head, the rubber sleeve on the side of the original earphone bass hole is perfectly worked, parallel to the earphone port, not concave, and not convex.

    3. There is an obvious gap in the earphone plug for a fake earphone, the gap of the genuine product is not obvious, and the genuine product can clearly see a small circle.

    4. No matter how fake Niu X is, it can't imitate the bass effect of the original headphones, cover the bass hole, the bass disappears, and the sound changes, which is the original. If there is no change in the voice, it must be a fake. Therefore, this is the most effective and authoritative identification method, if it is not easy to identify, **bass** cover the bass hole or let go and feel it.

    Below are the original Apple 6 headphones from two origins Vietnam in Vietnam and China in China

    5, some netizens think that the textured clinker diaphragm is a fake, in fact, otherwise, after the original iPhone6 is taken out for comparison, the original screen headphones will also have plastic diaphragms, titanium membrane headphone cables, but this origin is in China, this original headphones cover the bass control, the bass will disappear.

    6. The picture below is the wool velvet diaphragm headset that netizens have always recognized, and the origin is Vietnam in Vietnam Fake headphones can't do this effect, but the counterfeiting technology of profiteers is improving, and we still use bass hair to identify.

    The above is how to distinguish the authenticity of iPhone6 Plus headphones Some methods to share, if you don't know much about this aspect, you can refer to the above methods to try.

  4. Anonymous users2024-02-04

    Buy a fake one, the effect is almost the same, and the real Apple product is not cost-effective at all.

Related questions
11 answers2024-03-23

First, when buying, you must first look at the DSR of the store, that is, the comprehensive score, that is, the service quality, delivery speed, and product description. If these three items are red, it means that the overall quality of the store is not bad, then you have to consider the next step, which is to see the sales of the Bluetooth headset you want. If you have to look at it, choose the one that has more sales, and then it's what the evaluation is. >>>More

13 answers2024-03-23

I.1Judging the quality of barley from the smell is the easiest and most practical, as long as you put the barley under your nose and smell it. A really good barley should be a pure rice flavor, and the fresher the barley, the more fragrant it is. >>>More

8 answers2024-03-23

Distinguish Lee's pants to see its ten features, copper zippers, copper buttons, copper holes, the most obvious is that the pocket has a lady line that is, a wave, the pocket is a shield, is a standard five-pocket pants, left twill fabric, the pocket has Lee's flag microphone, the pocket has a firm X jujube line, there should be a pants style number on the left side of your pants! Or look at the following points ... 1 Waist Card: >>>More

9 answers2024-03-23

At a glance at the surface characteristics, the surface of the first Ejiao is black-brown, the rubber block is very flat, the color is uniform, and there are no oil holes and pores. The surface of the fake Ejiao rubber block is usually brown or blue-yellow, some have oil holes, air holes, etc., and the rubber block is not very regular. >>>More

8 answers2024-03-23

The main identification method of Air Jordan sneakers, including the AJ3, is the identification of the shoe label. >>>More