How to install computer fax, require careful explanation.

To add up, the XP operating system can install fax components, but the Vista operating system does not have a fax component, and software must be installed to send and receive faxes. Snappy Fax software is one of the better ones I have used, the disadvantage is that it is in English, and now there may be Chinese. Go to "google" yourself... Ha.

1.The hardware requires a computer (configured with a 56kmodem with fax data), a fax machine, and a cable with an RJ11 plug-in number header, which are plugged into the LINE port of the cable modem and fax machine respectively.

Second, install the software first, install the modem, install the driver of the fax driver software, and the Chinese version of the modem is in the driver disc, and a bitwarefaxdriver printer will be automatically added after installation (as shown in the figure), and the printer will be set as the default printer.

3. Setup this step is the key, open Bitware for the main program, click Settings, first select Auto-detect modem settings, usually automatically select the modem type (but not necessarily, my TP-Link is recognized as IS-101Compatible VoiceModem always has no contact with the fax machine when sending files, which makes me busy for a long time, and then manually selected, everything is fine). Then select Set Fax File to adjust the output of the Chinese copy during the printing process. Then set the printer's properties, select the port and driver, select the default values for other settings, and select the manual mode to receive the fax machine.

How do I install a fax machine?

After installing the fax machine, insert the ** line into the fax machine interface, 1Send a fax to the other party: First, put the file you want to send into the document feeder, dial the ** number of the other party, and press the start button when you hear the signal sound that the other party gives you.

2.Receiving Faxes: Receiving Manually:

Pick up the microphone, the other side lets you give the signal, you press the start button, you need to speak with the microphone, don't want to put down the microphone. Auto Receiving: It is to adjust the machine to receive automatically, you don't need to mention the microphone, the fax machine rings to the number you set, and automatically gives the other party a signal sound.

You don't need to go to the post office to open the fax machine, you can connect it to the ** line

Disassemble the fax machine and install the software CD-ROM of the check box.

Install ink toner according to your model's instructions and insert the printer cartridge into the fax machine. Install the entire drum unit if this is your cartridge installation.

Make the paper on all fax machine trays stand out. Load the paper tray with paper.

Plug the wire into the back of the machine and plug in the machine inch into a **jack and at the other end of the **wire** at home. Lift the ** on the fax machine and listen for the dial tone.

Turn on the control panel of the machine and follow the installation instructions for the fax machine model. Each machine is different, so you need to check the specific instructions, instructions.

Plug the ** line directly into the fax machine. The fax machine receives the mode through the navigation control panel. The fax machine will have different settings specifying whether you want the machine to answer a fax each time it is called, and switch between fax and service.

Plug the ** line from the modem into the fax machine. If you need two, plug another wire from the fax machine into your computer. Slide to your computer and run the installer on the software installation CD if using a computer fax machine.

Set up the name of the modem, the fax machine using the software wizard, and the name that pops up from the disc. Now you can use the fax machine at the same time via the ** line.