What should I do if the vacuum compression bag does not have an air extraction bar?

Ask the seller for or buy a new suction rod, but the suction pump cannot be pumped without a rod.

Method of pumping air from the compression bag:

1. Open the compression bag and put the clothes or quilts in it!

2. Seal the opening with a slide (note: if you don't seal the opening all at once, seal 3/4 first, leaving a small opening.) Then press the bag by hand to press out part of the air; then seal the remaining openings).

3. Open the valve of the air extraction hole, open the lid first, and then see if the valve below is screwed or loose, it must be loose in order to extract the air!

4. Pair the air pump to the upper hole and start pumping, because manual pumping is relatively slow, so it is recommended to stop and rest when pumping halfway, seal the hole, and wait until the rest is enough!

If you have a vacuum cleaner at home, you can use it directly to pump air (the vacuum cleaner can also be used as an electric air pump!). ）

2.There are no air extraction tools, and if the bag is small, it can be rolled by hand to roll away the air, and the space saved by this method is not particularly large.

Vacuum compression bag: It is now a storage product mainly used for storing quilts, clothes and other items. Its principle is to use atmospheric pressure to flatten the originally expanded quilt and other items, isolate the outside air, in order to save space, to achieve dust, mildew, moisture, insect-proof effects But although it is a vacuum compression bag, it is not an absolute vacuum, and the current product is generally used to use a vacuum cleaner or a manual air pump to remove the air in the bag

It is mainly made of plastic, PA PE PA PET or PE as raw material bag, plus a suction valve is now a new member of the storage family More details: Vacuum compression bag has the functions of moisture-proof, mildew-proof, moth-proof, anti-odor, etc., and the air in the compression bag and clothing quilt is extracted by using the air extraction tool, so as to reduce the volume and increase the effect of storage space! The material of the compression bag, the general PET+PE bag, has better adhesion, and it is also the material used in the bag now.

But the disadvantage of this vacuum compression bag is that it is relatively brittle. The other is the common mope compression bag in the supermarket, the bag of this material is not well adhered to, and it is easier to leak, it is particularly soft, and it feels better than other bags. At present, the material used in export compression bags is PA+PE, which has better flexibility, higher adhesion, and is not easy to leak, so the cost is also relatively high.

What should I do if the compression bag does not have an air pump, hello dear, the compression bag does not have an air pump, and it can be replaced by a vacuum cleaner. The principle of a vacuum cleaner is similar to that of an air pump, so you can use a vacuum cleaner to extract the air from the compressed bag. Compression bags, also known as PE zipper composite bags, can effectively prevent fleas, mold, moisture, oxidation, etc., so that the clothes are clean and preserved.

Vacuum compression bags can be divided into three categories according to the exhaust method: 1. Exhaust type, which is exhausted by external exhaust appliances such as air extraction pumps or vacuum cleaners. 2. Roll type, this kind of compression bag is generally smaller, and the gas is discharged by pressing the bag by hand rolling.

3. Sitting pressure type, generally three-dimensional, with a common dry and heavy object sitting pressure, the gas is discharged. I hope my answer is helpful to you, and finally I wish you good health and a happy mood again!

It is okay if the vacuum compressed bag does not run out of air, and the vacuum compressed bag uses a vacuum cleaner or a manual air pump to pump the air.

The working principle of the vacuum compression bag is to pump out the air inside the quilt and clothing, so that the volume can be reduced, and the atmospheric pressure is used to flatten the originally expanded quilt and other items to isolate the outside air, so as to save space and achieve the effect of dustproof, mildew-proof, moisture-proof and insect-proof.

However, although it is a vacuum compression bag, it is not an absolute vacuum, and today's products generally use a vacuum cleaner or a manual air pump to remove the air in the bag. Use the air extraction tool to remove the air in the compression bag and the quilt of clothes, so as to reduce the volume and increase the storage space.

How to use the pumped quilt compression bag:

1. Before putting the clothes quilt into the compression bag, dry the clothes quilt, then fold it into a shape that is easy to store, and put it in the bag as much as possible, at least a few centimeters away from the sealing zipper.

2. Check whether the zipper sealing part is clean and whether there are fine fibers or dust before pulling the zipper (fine fibers or dust may reduce the tightness of the compression bag and cause air leakage in the compression bag, if so, please wipe it clean with a water-soaked rag.)

3. Install the slide, press the slider zipper with your hand, slowly and lightly pull to the other end of the zipper, when it is two-thirds, squeeze or fold the clothes or quilt, let most of the air be discharged, and quickly use the slider to pull the remaining one-third of the part (so that you can save a lot of time and effort when pumping with a hand pump).

The above content reference: Encyclopedia - Vacuum Compression Bag.

There may be one of the following reasons for the air leakage after the compression bag has been pumped:

Reason 1: The red-core Zheng-colored gasket inside the white screw of the compression bag is missing;

Reason 2: The zipper of the compression bag is not sealed, and the white screw on the compression bag is not tightened;

Reason 3: The bag is visibly damaged;

Because there are only three places where the air will be intake:

1. Sealing: The seal is not sealed and leaks, because the compression bags are folded and sent over, so the sealing ** will also have creases, so that when sealing, it must be sealed several times, and it is really not possible to pinch it with your hands a little bit, so that there will be no air leakage. The quilt should not be too full, and it needs to be about 3cm away from the seal (there are tiny fibers and dust entering, which will reduce the sealing performance, and the solution is:

Wipe clean with a water-soaked cloth before sealing and then close the zipper. ）

2. Extraction port: The second situation is that the soft leather cushion inside the suction cover is unscrewed and misplaced during transportation, which only needs to take out the leather cushion, correct the position from the new effect, and then press it tightly with your hand.

3. The bag itself: whether there are holes in the bag, now the bag is getting thicker and thicker, do not touch sharp objects during use, and there will generally be no holes.

If there is a hole or puncture, it can be used normally with a wide scotch tape that is glued on both sides. <>

1. Unscrew the lid of the compression bag.

2. Put in the clothes to be stored and tidy them up.

3. After everything is done, seal it with a tablet (after that, try to see if there is an air leak, and if there is, you have to reseal it).

4. There is a circle of threads on the manual vacuum pump, screw it on.

5. Pump the air pump up and down until all the air inside is pumped out.

6. Screw on the lid.

7. The compression and pumping are completed, and compared with the ** in step 2, the large ruler saves about half of the volume.

1. First of all, open the lid of the vacuum compression bag.

2. Next, put the clothes in the vacuum bag.

3. Then seal the vacuum bag with a tablet, otherwise it will leak, as shown in the picture of the hail of potatoes.

4. Then screw the thread on the manual vacuum pump to the top of the vacuum bag inflator to sell the sail.

5. Then twitch up and down, and soon the air will be pumped out, be patient.

When vacuuming, do not remove the rubber sheet that blocks the air port in the vacuum compression bag.

To prevent the rubber sheet from falling, if the rubber sheet falls, it cannot be pumped.

Vacuum compression bag, mainly used for quilts and various types of clothing bags. Its working principle is to pump out the air inside the quilt and clothing (like pressing the sponge will shrink) so that the volume can be reduced, and use the atmospheric pressure to flatten the originally expanded quilt and other items to isolate the outside air, so as to save space and achieve the effect of dustproof, mildew-proof, moisture-proof and insect-proof.

Don't remove it, that gasket should be made of silicone. When the compression bag is pumped, the air in the bag becomes a negative pressure state, and the silicone gasket seals the suction valve under the action of suction.

I don't take it off.

And to prevent the rubber sheet from falling off.

If the rubber sheet falls off and can't be pumped, don't buy a vacuum compression bag that is too big, it's better to buy a small one. Because these things look good and practical, but in reality they are very average.

I bought 10 of them in a month, and 5 of them leaked directly, and only 1-2 of them have been used after being replaced.

If you take it off, you can't vacuum, and it's all up to him.