-
Whatever color the clothes are pulled, the white ones can be pulled with 84 or gasoline, banana water.
For other colors, use Amway's laundry detergent. I used to have clothes that were dyed and washed with Amway.
But no matter what you wash with, it's certainly impossible to get back to the way it was before.
-
What do you use gasoline can only be washed off a little bit In fact, it can't be washed I got polyurethane in a pair of pants or scrapped It makes me feel distressed for a long time New pants I only washed them once.
-
It doesn't seem to be washed, it seems to be worn a few more times, a little sweat, and it can be washed.
-
I'm a waterproofing person, and I've also participated in paint experiments, using toluene, or acetone.
-
The main features of waterproof coatings are as follows:
1.It is a viscous liquid polymer synthetic material that has no fixed shape at room temperature. After coating, it is a general term for materials that form a tough waterproof membrane on the substrate after being cured by the volatilization of solvents or the evaporation or reaction of water.
2.Waterproof coatings are made of synthetic polymers, polymers and asphalt, polymers and cement as the main film-forming substances; Solvent-based, emulsion-based or powder-based coatings made by adding various additives, modified materials, filler materials, etc.
3.The waterproof coating is a viscous liquid at room temperature, and after coating and curing, it can form a waterproof coating film without joints. Waterproof coatings are especially suitable for waterproof construction in the façade, yin and yang corners, pipes through the structural layer, protrusions, narrow places and other detailed structures, curing shops, can form a complete waterproof membrane on the surface of these complex components.
4.The construction of waterproof coating is a cold operation, which is easy to operate and has low labor intensity. The waterproof layer of the coating film formed after curing is light in weight, and most of the special-shaped roofs such as light thin shells are constructed with waterproof coatings.
5.The waterproofing of the coating film has good water resistance, weather resistance, acid and alkali resistance characteristics and excellent extension performance, which can adapt to the needs of local deformation of the base layer. The tensile strength of the waterproof layer of the coating film can be strengthened by adding a carcass reinforcement material, and it is easy to reinforce, reinforce, and repair some parts that are easy to cause leakage such as base cracks, structural joints, and pipe roots.
-
Waterproof clothing can be cleaned with a neutral detergent and a pressing limb method, and here are the steps:
Tools Required: Neutral cleaner.
1. Squeeze the neutral cleaning agent into the water basin.
2. Fold the waterproof clothes and put them in the water.
3. Soak for half an hour.
4. After half an hour, do not rub, but clean the clothes by pressing repeatedly, the purpose of which is to prevent rubbing and destroying the waterproof membrane.
5. Finally, press out the clothes with water and let them dry.
6. After drying, it can be seen that the waterproof clothing is still very clean, and the effect is not staggered.
-
Your waterproof fabric with coatings. Generally speaking, clothes made of this fabric do not need to be washed often, and if they are not too dirty, scrubbing them with a hot and humid towel is enough. Wipe it a few times, re-twist the towel once, and repeat it a few times to scrub it clean.
If the inside is also dirty, you can use the method of hand washing, put it in the bathtub, add more warm water, dish soap or meal lotion, and wash it a lot. Then thoroughly clear the foaming water, and finally put it in the washing ruler and dressing machine to dehydrate.
-
This needs to be washed with a softer brush and water glued to the laundry detergent.
-
Waterproof clothes need to consider the material and waterproof performance of the clothes when washing, the following are some common cleaning methods and precautions::
1.Hand wash: For some waterproof but not too thick clothes, you can use the hand wash method. Soak the clothes in water for a while, then rinse the detergent off the clothes with clean water, and finally dry the clothes.
2.Machine wash: For some thicker waterproof clothes, you can put them in the washing machine to wash.
It is important to note that you should choose a gentle washing method and avoid using high heat drying. At the same time, avoid using too much detergent to avoid damage to the waterproof properties of the clothes.
3.Dry cleaning: For some waterproof clothes that are more expensive or have special materials, you can send them to a professional dry cleaner for cleaning.
It should be noted that no matter which cleaning method is used, the following points need to be noted:
1.Avoid using too much detergent to avoid damage to the waterproof properties of the garment.
2.Avoid drying the beam at high temperature, so as not to damage the material and waterproof performance of the clothes.
3.During the washing process, avoid excessive friction or rubber pulling to avoid damage to the clothes.
4.When drying, avoid prolonged exposure to sunlight to avoid damage to the material and waterproof performance of the clothes.
5.When storing, avoid folding or compressing the garment to avoid damage to the waterproof performance of the garment.
-
In our current life, many people brush waterproof paint at home, and when the waterproof paint is stained with a little stain or has dust and oil stains on it for a long time, how should we clean it?
1. How to clean the waterproof coating on the wall.
1. We can use gasoline for cleaning, and we don't have to worry about the chemical reaction between the waterproof coating and the gasoline, and we don't have to worry about the gasoline will corrode the waterproof coating. All we need to do is apply gasoline to the stained area of the waterproof paint and brush it with a wire brush or a brush.
2. If the clothes are stained with waterproof paint, then we can use kerosene or gasoline to wipe them repeatedly, and then wash them off with soap or laundry detergent, try to use warm water when washing, if it really can't be washed off, we can also put the clothes in warm water and boil them for more than ten minutes, and then wash them off with laundry detergent to completely wash the waterproof coating.
3. If your clothes are white, then we can use the right amount of 84 to remove them vigorously.
Second, the use of waterproof paint precautions.
1. During construction, it must be noted that 24 hours after the end of construction can be sprinkled, and it can be used normally after two or three days of sprinkling.
2. When we stick things on the waterproof coating, we can use oily things to clean, because the waterproof coating itself is a mixture of water and oil, and we use a more oily liquid than the waterproof coating to clean, and the waterproof coating can be cleaned very cleanly.
-
2.You can use liquor with alcohol to remove, first prepare a basin, mix alcohol and water in a ratio of 8:2, then pour in a little liquor, and then put the paint stained in the basin to soak, wait for about half an hour, and gently scrub it to remove.
-
Wipe with toilet paper dampened with a small amount of gasoline or thinner (usually to dilute the paint). Then wash your hands with soapy water to avoid being lightly corroded. It can also be washed directly with hot soapy water at 60-70 degrees.
2.Alcohol + soap pour some alcohol on your hands, scrub with soap for 3 minutes, then rinse with water, after testing, the ink is halved, and then repeated several times can be gradually eliminated. Cons: Hurt hands, troublesome supplies.
3.Cleansing oil + detergent slowly apply the cleansing oil to your hands, rub for 2 minutes, and then rub with detergent for 2 minutes, rinse with water, and the ink is slightly reduced after testing, and it can be repeated many times and gradually fades.
-
How should the waterproof paint be brushed, see how the professional master does it.
-
You can clean it with gasoline. You don't have to worry about the chemical reaction between the waterproofing coating and the gasoline, and you don't have to worry about the gasoline corroding the waterproofing coating. All we have to do is apply gasoline to the area where the waterproof paint is stained and brush it with a wire or bristle brush.
Recommend Keshun family waterproof wet-painted metal roofing waterproofing coating R301. Its advantages are: excellent elasticity and fatigue resistance, can adapt to the expansion and deformation of metal roofs; Excellent thermal insulation, light reflection and UV resistance to extend the service life of the substrate; Strong adhesion to metal plates, not easy to fall off, effectively protect metal roofs; The coating adapts to the temperature change of -30 90 and effectively resists the test of various harsh environments; With water as the dispersion medium, water-based environmental protection.
If the clothes are stained with waterproof paint, then we can wipe them repeatedly with kerosene or gasoline and wash them off with soap or laundry detergent. Try to use lukewarm water when washing. If you really can't wash it off, we can also boil the clothes in warm water for ten minutes, and then wash them off with laundry detergent to thoroughly wash the waterproof coating.
If your clothes are white, then we can force the removal with the right amount of 84. When we stick something to the waterproofing coating, we can clean it with an oily thing, because the waterproofing coating itself is a mixture of water and oil. We can clean the waterproof coating with a liquid that is more oily than the waterproof coating.
For more information about coatings, it is recommended to consult Keshun Home Waterproofing. Keshun Home Waterproof is a high-end brand of Keshun Minjian, a wholly-owned holding company of Keshun, specializing in the research and development, production and sales of home improvement auxiliary products. Relying on the 25 years of professional R&D technology advantages of Keshun Co., Ltd., Keshun Home Waterproofing adheres to the international top environmental protection concept, and is committed to creating green and healthy home decoration auxiliary products.
Accidentally stained with waterproof paint on clothing, gasoline and banana water. >>>More
1. Look at the waterproofness of the product. The quality of waterproofness determines the best quality of a product. 2. Look at the environmental protection of the product. If you choose a toxic waterproof coating, it will release toxic gases for a long time, which is harmful to the human body. 3. Look at the authenticity of the waterproof coating.
1. Tibel Waterproof Coating (a professional new environmental protection waterproof manufacturer in Guangzhou) 2. JCDecaux Waterproof Coating (a wholly-owned enterprise designed by the French PAREX Group in China) 3. Gulai Waterproof Coating. >>>More
Solvent-based coatings: There are many types of such coatings, and the quality is good, but the cost is high, the safety is poor, and the application is not very common. >>>More
1. Film thickness inspection;
The needle puncture method should be used to puncture three points per 100 square meters, measure its height with a ruler, take its average value, and the thickness of the film should be greater than 2 mm. Colored pencils should be used to make a mark during the puncture so that it can be repaired. >>>More