Why do I always lose the internet at 10 o clock every night and get it around 11 o clock again

1.There may be a problem with the voltage that causes the broadband cat.

Reboot caused by disconnection, find a multimeter.

to test the voltage to see if it is normal; 2.Check whether the status of the broadband cat is normal when the connection is dropped, there is a DSL or whether the link light is always on, the DSL or link light on the broadband cat indicates the communication status between your broadband cat and the operator's equipment room, it should be always on at normal times, if it is not bright or flashing, the biggest possibility is that there is a problem with your **line, directly call the operator's customer service** to report the obstacle and let people check and repair: Telecom 10000 Netcom 10060

The timing is limited, or the network is scheduled maintenance time, and many companies have the habit of Peixiang modification, backup, upgrade, maintenance, and replacement at night. Some of them have announcements, and most of them are secretly disposed of by themselves in the middle of the night, for fear of affecting the user experience.

You can dial the lead sentence to beat the guest Huaizhong to change the service ** complaint.

It may be that the router is automatically disconnected by Duan Qiao. You log in to the router, and under the bandwidth and password of the WAN interface, see if the auto-disconnect function is selected, and there is a self-branching ballast disconnect period below. If you do select it, remove the auto-disconnect selection.

If you don't have a choice, it may be a problem with the carrier's network, and you can contact the carrier to solve it.

This should be the broadband fault problem in the Xiaoxun destruction area, how can there be such a regularity, it is recommended to ask the neighbor if this situation also exists. There is also a possibility to reset the router to try, Yu Qi to make sure that it is not a problem with his own home route.

You said that the wireless network at home was disconnected at 12 o'clock, so it is possible that at this stage it is a key stupid manuscript Lu, and the network company has failed, so you can't even cover the network at that stage, so there is no network.

It should be limited to Sakura who is suspected of being disconnected at twelve o'clock, and there is this Yin Songhui function in the route.

I asked the operation and maintenance staff, it was their problem, they said that the electricity and travel meter burned out, buried Qing has not been done, I have been calling the liquid stool recently, it has never been disconnected before, just these days, at first I thought it was a light cat broken.

The mobile phone network is not good at night, and it cannot be ruled out that it is the peak period of network use, and many people use the network to cause this situation. In addition, the signal will be affected by various factors such as terrain, landform, and tall buildings in the process of propagation, and if you are in a relatively closed place, the signal will also be affected. Here's how to deal with it:

1. Turn the phone on and off again;

2. Swap the SIM card to a family member's or friend's phone and try again;

3. Check whether there is a signal from other Unicom users around;

The essence of the disconnection.

When using an Internet Multi-Line Chat (IRC) network, a netsplit is a loss of contact between two IRC servers. As a result, one party chatting suddenly sees the other person disappear.

IRC networks are typically linear topologies. This means that each server connection is directly connected to the other server. When two servers lose contact, the network is split into two parts.

Users are still connected to users on that part of the network they are on. If the network is a mesh topology, each server can pass information to the other server when the first server is lost.

Brother, I have too much say in this issue, because I am also on the Internet, and I have almost the same experience as you, and I guess you are mostly disconnected at night in the summer. Right? In fact, the disconnection of the local connection has nothing to do with Netcom or Telecom, it is that the voltage output of your cat is not enough.

Stop mine, change to a stabilized power supply. If your cat is a few V, change it to a few V regulated power supply. My cat is 9v, and I only spent 10 yuan (including shipping) in ** to solve the Netcom that has plagued me for several years.

If you have a local sale that is more convenient, very cheap, pay attention to a point, 9V cat you buy 9V 1000A or 1500A power supply, ampere is current, large point only benefits no harm, voltage can not be large.

The regulated power supply is between 100-240V voltage can stably output 9V voltage to the cat, your voltage is not lower than 100V, right? Hehe, 100v doesn't seem to work at all.

If I'm not clear enough, you can ask me more. The capital is sour. Absolutely original!!

1. First of all, the stand-alone device is connected to the telecom optical modem and other equipment to ping the gateway or DNS server address of the telecom, and a numerical value is obtained; 2113

2. Connect the router again (unplug the other 5261 network cables) and ping again;

3. Then connect to other computers and ping when it is in normal use;

Get 3 values, which is larger or has packet loss, it means that it is the problem of **, the first time is that the line of 4102 telecom company is not good, the second time means that there is a problem with the router, and the third time if it is abnormal, it means that there is a problem with the local area network.

Attached: Obtain the DNS method, search the DNS of the 1653 business through mobile phones and other devices that can access the Internet, as long as it is in the operator's network, it can be used as the destination address for ping testing.

It seems to be in a hurry, but there is another way, try it, replace a good cat, and you will know what the problem is, if it still doesn't work, it's the fault of the wiring and the computer.

It's likely that there is a problem with the network, so let's find a maintenance person.

Wi-Fi (pronunciation: wafa, French pronunciation: wifi), also known as "mobile hotspot" in Chinese, is a trademark of the Wi-Fi Alliance manufacturer as a brand certification for products, is a standard wireless LAN technology.

Due to the close relationship between the two systems, Wi-Fi is often used as a synonym for IEEE standards. "Wi-Fi" is often written as "WiFi" or "WiFi", but they are not recognized by the Wi-Fi Alliance.

Not every product that matches the IEEE applies for Wi-Fi Alliance certification, and a product that lacks Wi-Fi certification does not necessarily mean that it is not compatible with Wi-Fi devices.

Wireless network in the category of wireless LAN refers to the "wireless compatibility certification", which is essentially a commercial certification, but also a wireless networking technology, which used to connect to the computer through network cables, and Wi-Fi is connected to the network through radio waves; The common one is a wireless router, so the effective range of the radio wave coverage of this wireless router can be connected to the Internet by Wi-Fi connection, if the wireless router is connected to an ADSL line or other Internet lines, it is also called a hot spot.

The reasons why the internet is disconnected at night are as follows:

1. Internet time.

During the daytime, most people need to work outside the home, and there are few people at home. At this time, the network speed is naturally normal and smooth. But in the evening, especially between 9 and 12 o'clock, you will notice that the network is slowing down, because all the residents are home and are using the network at the same time.

In addition, the frequency band of the routers between them is the same, which will naturally cause a certain conflict in the signal, and it is normal for the network to slow down.

2. Network cable problems.

Network cable issues are also one of the most common causes of network slowdowns, but they are extremely easy to overlook. There are three types of network cable problems, which are specification problems, damage problems, and loose problems. All three of these problems will directly affect the speed of the network, causing signal instability.

3. Game software.

Unlike other software, game software not only has a large memory, but also requires a variety of support to run smoothly and smoothly.

Especially for those who have installed mobile broadband, you should feel that the network speed has dropped when playing games. This is because China Mobile has built an IDC computer room late, and some games also need to cross the network to access the servers of Unicom and Telecom. This can lead to lag and stuttering, which can make the gaming experience worse.

It may be that the voltage of your Internet cat is unstable, just change to a stabilized power supply to ensure that the voltage is stable.

If it still doesn't work, call ** to telecom customer service, let them detect the problem and help you solve it.

Because the telecom company will restart the port of the home at regular intervals every day for daily billing, generally speaking, between 12 o'clock and 2 o'clock, if the broadband is not set to automatically connect after disconnection or the set automatic connection interval is too long, the network may be disconnected.

When using an Internet Multiline Chat (IRC) network, a disconnection is a loss of contact between two IRC servers. As a result, one party chatting suddenly sees the other person disappear.

Why is the wifi disconnected at 10 o'clock in the evening on time, hello! 1. First of all, see if the wireless network is normal, connect with a mobile phone or other computer, and then move on to the next step, otherwise toss the wireless router first. 2. Look at whether the IP address has been obtained, click "Details" to see, if you get the correct IP address, it should be similar to the rock into the router, find out if there is a similar client list and other functions, see if you can see your computer.

4. Take a look at what channel the wireless router is set on, and I have encountered the problem that the laptop cannot be connected due to channel incompatibility before. You can try changing it to 1 or 6. Try it according to what I said, and post the results or findings, so that you can continue to analyze, otherwise there is no effective information, and it is not easy to do.

Hope it helps!

Summary. Signal interference Cause: There may be a strong source of signal interference next to the router, such as microwave ovens, cordless **, magnets, high-voltage wires, etc.

The wireless signals and strong magnetic fields emitted by these devices will seriously affect the normal transmission and reception of the router's wifi signal. Solution: Turn off these devices, or install the router in a place with relatively low interference2

Router Firmware Problems Cause: The router firmware version is too low, or the firmware and hardware do not match, which may also cause the router to work.

Signal interference Cause: There may be a strong source of signal interference next to the router, such as microwave ovens, cordless **, magnets, high-voltage wires, etc. The wireless signals and strong magnetic fields emitted by these devices will seriously affect the normal transmission and reception of the router's wifi signal.

Solution: Turn off these devices, or install the router in a place with relatively low interference2Router Firmware Problems Causes:

The router may also work if the firmware version of the router is too low, or if the firmware and hardware do not match.

I'm sorry I don't understand, but can you elaborate on that?

Mobile phone wifi function bug Reason: There may be bugs in the design of individual mobile phone wifi software, such as turning on the power saving mode, which causes the mobile phone wifi to automatically turn off when idle. Or it has compatibility problems with the router, causing other WiFi devices to be disconnected.

Solution: Upgrade the mobile phone system to the latest version, turn off the power saving mode or other options that may cause the wifi to be turned off, and feedback to the mobile phone manufacturer. 4.

Weak wireless signal causes.