How to adjust the time, day and date of Longines master watches

Diwang Building, No. 5002, Shennan East Road, Luohu District, Shenzhen, Guangdong Province.

Shun Hing Plaza) Room 2513, 25th Floor] for your answer.

The correct way to adjust the date and time on the watch.

First, pull out the crown so that all the hands of the watch stop and enter the "time adjustment" state. At this time, adjust the time to 6 o'clock. (Don't damage the date module for one day or week).

Second, push the crown back to the position of "Adjust Date and Day". (At this point, the watch hand begins to rotate normally).

Third, adjust the date and day of the week to the day before the table day.

The fourth is an important step.

Please pull out the crown again to the "adjustment time" state when the hand stops and start adjusting time and rotate a hand clockwise (do not rotate a needle counterclockwise.) The time module is very damaged). At this time, the movement is soft, so adjust the time until the hand reaches about 12 o'clock, and the date and day of the week jump to the next day (watch day).

The pointer of the date jump description table indicates the time period of the morning of the adjustment table from now on. If you have adjusted the table just in the morning, adjust the table to the current correct time to fully restore the crown of the table.

Rotate the hands of the watch normally to exit the watch.

If the watch is adjusted in the afternoon, continue to adjust the time so that the clock passes 12 o'clock again. (At this time, the date and day of the week do not jump.) The current day of the table is also displayed.

The watch represents the time period of the afternoon of the watch. At this point, proceed to adjust the time of the watch to the correct time now.

The time, date and day of the week are the same for regular Longines watches. The watch has two movements, the first date and the day, which are adjusted up to the day and down to the date. The second gear is to adjust the time. However, it is better to adjust it clockwise, not counterclockwise, as that will damage the watch.

1.The watch handle pulls out a gear to adjust the date, and the second gear is to adjust the time, and first pulls out a gear to prepare to adjust the date. The steps are as follows:

2.The watch handle downspin and downspin adjust the day of the week respectively. If today is Sunday, March 4, you can change the day of the week and the date to yesterday's 3rd Saturday.

3.Then pull the watch handle out to the second gear, adjust the time, and turn the watch hand one or two times until you can see that the watch hand goes to about 12 o'clock, and the day and date jump to Sunday and 3 respectively at the same time, which means that the watch time enters 1-12 o'clock in the morning.

4.According to the usual practice of adjusting the time on the watch, after turning the watch hand once, the watch time enters 1-12 o'clock in the afternoon, and you adjust it to the correct time now, and this is done. After a little more than 90 minutes, the watch will automatically jump to Monday the 5th.

I don't know if you're talking about the Longines moon phase or a famous craftsman, but in general the procedure is the same, the mechanical watch will jump the date after nearly 20 hours a day, you say that there is only one possibility to jump at noon every day, your watch is fast or slow according to the normal time for 12 hours, that is to say, when 12 o'clock at noon, your watch is actually 12 o'clock in the evening, don't worry, as long as you dial your watch back 12 hours (a circle) to the watch, don't call back, this will hurt the watch, And the problem of Xiaoyue's morning jump has been solved, I hope it will help you.

Here's how to adjust the time and date on a Longines watch:

Material preparation: Longines Della Wiener.

1. Pull out the crown and stop all the hands of the watch to enter the "Adjust Time" state. At this time, adjust the time finger to 6 o'clock.

2. Push the crown back to the state of "Adjust Date and Day". Adjust the date and the day before the day before the date you adjust the schedule.

3. Pull out the crown again to the "Adjust Time" state when the hands stop, start to adjust the time, and let the hands turn clockwise.

4. At this time, the action needs to be soft, and the adjustment time is only round until the pointer indicates that it is close to about 12 o'clock, and the date and day of the week are found to jump to the next day, and this jump may occur when the hour hand passes 12 o'clock for the second time, it doesn't matter.

5. The hand of the date jump description table now begins to indicate the morning time period of the day you adjust the watch, if you happen to adjust the watch in the morning, then adjust the watch to the current precise time, and then push the crown back completely, the watch hand rotates normally, and the watch is over.

Manual modulation is required.

Only watches with a perpetual calendar function will automatically calculate leap months in leap years and skip small months without 31 days, and other ordinary watches with dates have to manually adjust the date.

If it is a Longines mechanical watch, the watch handle pulls out a gear to adjust the day and date, and pulls out the second gear to adjust the time.

Second, first of all, at 24 o'clock, the watch hand is in the back half of the circle, and the time is from 10 o'clock to 2 o'clock in the evening, so that the date transmission gear may be damaged.

3. Then adjust the time to 10 p.m. to 2 p.m., and then start to dial the knob to adjust the date. For example, if it's the 26th, you have to adjust the date to the 25th, and then move it outwards to make the date jump to the 26th, and then to the correct time.

Fourth, note that if it is in the morning, it means that the clock hand is less than one turn. If it is afternoon, you need to turn more than 1 circle, so that the 24 o'clock hand is more than half, and you must pay attention to the 24 o'clock to match the real time.

5. If it is a Longines watch without a date, when the seconds run to 12 o'clock, pull out the handle and rotate clockwise to adjust the time. Poor selling.

6. If the Longines watch has no seconds, for the accuracy of the time, you can adjust the minute hand to the two minutes before the regret Qingqin who wants to adjust the time, and push it back to the handle after adjusting the time.

7. If it is a Longines watch with a calendar, pull out the handle a little, you can adjust the day clockwise, adjust the date counterclockwise, and pull the handle to the outermost, you can adjust the time, and the specific operation is the same as that of a non-calendar watch.

Hello, dear, the date adjustment method of Longines watch is as follows: first, when the second hand runs to the twelve o'clock position, pull out the shank and rotate clockwise to adjust the time. If there is no second, for the accuracy of the time, you can adjust the minute hand to the first two minutes of the time, and push it back to the handle after adjusting the time, and then if it is a Longines mechanical watch with a calendar, pull out the handle a little, you can adjust the day clockwise, adjust the date counterclockwise, pull the handle to the outermost, you can adjust the time, the specific operation is the same as the no calendar watch, there is not much difference, and the zero jump word of the Longines jujube leakage watch will not be as accurate as a quartz watch, It may be earlier or later, this is because the date and day of the week are a wheel to push Oh, I hope mine can help you, if you are satisfied with my service, please give a thumbs up, I wish you a happy life and smooth work!

The Longines Master Collection is one of the classic collections of Longines watches, in which the Master Moon Phase is loved by watch lovers for its exquisite craftsmanship and elegant design. However, over time, the time and date of the watch may need to be adjusted. This article will show you how to adjust the time and date of your Longines Moon Phase watch.

Sentence filial piety. 1.Adjust the time.

First of all, to adjust the time of your watch, you need to pull out the crown of your watch. Then, turn the crown counterclockwise until the time hand points to the desired time. Finally, the time adjustment is done by pushing the crown back into place.

2.Adjust the date.

If you need to adjust the date of your watch, you will also need to pull out the crown of your watch first. Then, rotate the crown clockwise until the desired date is displayed in the date window. It is important to note that when adjusting the date, do not point the hand between 8 p.m. and 2 a.m., as the watch is in the process of changing the date during this time, which would compromise the stability of the watch.

Finally, the date adjustment is completed by pushing the crown back into its original position.

3.Adjust the moon phase.

One of the features of the Longines Master Moon Phase is its precise moon phase display. If the moon phase display is inaccurate, it needs to be adjusted. First, pull out the crown to the second gear, then gently rotate the crown until the moon phase display in the moon phase window matches the actual moon phase.

It should be noted that each time you adjust the moon phase, you need to rotate at least one day (i.e., the moon phase cycle) to ensure the accuracy of the moon phase display. Finally, the moon phase adjustment is done by pushing the crown back into place.

All in all, the Longines Master Moon Phase is a classic watch that combines watchmaking craftsmanship and elegant design, and if you need to adjust the time, date or moon phase, you can simply follow the steps above to maintain the precision and stability of your watch.