How to match a table tennis racket by yourself and how to match a table tennis racket by yourself

How to choose a table tennis racket.

Generally speaking, there are two principles: one is to fit one's own style of play, and the other is to balance the racket with the sponge and rubber.

1. Look at the playing style to choose a racket.

Under the condition of ensuring that you are satisfied with the ball feeling, try to choose a racket with a large elasticity. For example, a person who has a good sense of hitting the ball and uses his hitting skills well, but the lethality of hitting the ball is not very sufficient, so he can choose a more elastic racket to strengthen his speed and improve the lethality to maintain a high level of skill.

2. The soft and hard of the racket and the sponge complement each other.

Here are two examples:

The first is the arc circle play, usually using a high elastic soft bottom plate, which can provide strong rotation and speed after leaving the stage through the deformation of the bottom plate itself, usually using hard sea surface and soft rubber to match, in this combination can play both rotation and speed of the arc ball.

The second is the fast attack play, the near Taiwan fast attack players can choose a hard bottom plate and a softer sea surface, which can make the ball improve the speed of the board and the best speed, and it is easier to reflect the rhythm and speed of the positive glue near the fast attack. Of course, it is also possible to choose anti-glue if you are close to the fast attack, but note that the sponge should also be slightly softer than the arc circle play.

Make a table tennis racket that suits you, choose a "DIY" racket, ball machine, glue, and glue, and then make your own bottom plate, according to your own style of play, style, buy materials from **** to tailor for yourself. For example, the "artifact" made by the grinding and infiltration of the pins is the "blue aromatic carbon" (seven splints) imitated by Stica, and its configuration is as follows:

Indonesian Ebony Fabric + Spruce Wood + Blue Aromatic Carbon + Paulownia Big Core + Blue Aromatic Carbon + Spruce Wood + Mahogany Core Surface.

Thickness: 8mm, the weight of the bottom travel leather plate is lost ridge: , the front cloud is a single rubber, and the reverse side is a common set of rubber, with a total weight of 165g. The handle is hollow and the handle is removed from the old Stika racket, and it looks beautiful!

Cost: Indonesian ebony surface material 10 yuan + spruce force material yuan + blue aromatic carbon 15 2 = 30 yuan + peach wood core surface material 5 yuan plus shipping (12 yuan) a total of 72 yuan (paulownia wood core is made of French Cabernet red wine packaging, no money).

Trial playing effect: moderate weight, sufficient bottom strength, fast speed off the board, transparent sense of hitting the ball (through the board), suitable for fast attack, arc circle play.

Making a pair of table tennis rackets requires a slow judgment of plates, racket handles, jigsaws, glue, sponges, rubber, and bottom plate edge protection. Homemade rackets can be roughly divided into three processes: equipment selection (baseplate, glue), pasting, and maintenance of the finished racket.

The first is to buy materials online, first, a board of cypress lifting section of large core board rice, (20 30cm) two, carbon fiber board centimeter) one, three, cypress veneer two, (20x35cm). Fourth, the table tennis racket handle is paid, and fifth, epoxy resin glue.

After the materials are purchased, the various plates are first lowered into the shape of ping-pong cypress (slightly larger). Stick the carbon fiber board first, apply the AB glue evenly on the large core board, put the carbon fiber board on the large core board and press it, stick it with two flat wooden boards up and down, and tighten the four corners with screws and wait for it to dry (1 hour dry) and then stick the other side in the same way.

After the two-sided carbon fiber board is glued, it should be noted that it is best to put plastic paper on it when sandwiched with a wooden board to prevent it from sticking to the wooden board. After all the sticking is finished, draw the line on the sample pat, grind the edge out with a grinder according to the line, be sure to grind it slowly, and paste it with white latex after grinding, and then use a grinder to grind the excess part out according to the handle after drying, and a table tennis bottom plate is done.

Choosing a table tennis racket that suits you is an important job for beginners. A racket that is inexpensive and good quality and helps you make the most of your strengths is a cost-effective racket. The table tennis racket consists of three parts: a base plate, a rubber and a sponge. The proper combination of the three determines the quality of a racket.

1. About the bottom plate. From the material point of view, the current surface materials on the market include composite board, all wood board, cork plus carbon fiber, all wood plus carbon fiber, all wood plus titanium fiber, etc. The handle of the table tennis racket is divided into light and heavy, the one with a heavy head is suitable for offensive players, the one with a heavy head is suitable for defensive players, and the center of gravity is suitable for all-round play.

2. About rubber. The rubber is divided into positive glue, reverse glue and long glue, and its choice is inseparable from the way it is played. The positive rubber particles are facing outward, the ratio of particle height to diameter is not more than 1 to 1, it hits the ball more steadily and quickly, and can also cause a certain rotation, and it is not easy to eat the turn, which is suitable for the fast attack type of play near the platform.

The anti-rubber particles are facing inward, the smooth side is facing outward, the viscosity is large, the friction is large, and it is easy to cause strong rotation, which is suitable for players who play arc circles and cut the ball, and it is also the most commonly used rubber at present. The long rubber is also the particle facing outward, but its particles are long and soft, the rotation changes are weird, generally rely on the ball to determine the rotation strength of the return ball, and produce the opposite rotation, so that the opponent is difficult to adapt, the user must have a comprehensive technique and the style of play is changeable.

3. About sponges. The thickness of the sponge is generally between millimeters and millimeters, and the hardness is between 30 and 50 degrees. Generally, the harder and thicker the sponge, the more elastic it is, and the faster the hitting speed is.

However, it is not said that the harder and thicker the better, because not only is the racket too heavy, but it is also too elastic to control. For beginners, it is recommended to choose a reverse sponge with a thickness of up to millimeters and a hardness of about 40 degrees or a positive sponge with a hardness of about 35 degrees.

There's no need to be too expensive if you play on your own! Just go to the store and buy a pair! The front and back should not be too thin. The weight is as important as possible! Newbie! If you've become a master! Then you can stick the racket yourself! Buy your own materials and make your own!

Amateur novices can use the finished product to shoot, go to the sports store to find a less elastic (that is, the rubber is softer when pressed), ** suitable on the line.

First, select the finished shot.

Most of the finished auction brands have Pisces 729 Double Happiness and most of the domestic brands are marked with stars 1-5

You can choose from 3-5 stars to buy.

** Ranging from 50-199.

Novices choose below 100 and above 50 is the best.

Wait for the technology to mature, and then change the finished product or DIY beat, carry out higher learning, and establish your own technical characteristics more clearly in the practice.

Hello landlord.,Since it's a beginner golfer.。。。 I recommend two basic configurations,** are not expensive. Perfect for cultivating feel...

1.I plan to play in the future and tend to be fast in arcs.

Base plate: Galaxy MC-2 five-plywood .

Forehand 3 or 729-08 Backhand 729 Focus 3, or CJ8000

2.Intend to play later in favor of fast arcs.

Base plate: Galaxy U-2 7 splint Although the hardness is greater than that of MC-2, due to the thinner force material, it bites the ball very well, and the arc circle is also very good. . .

The above equipment ** added up, will not exceed 200 yuan...

I wish you better and better golf skills!! If you have any questions, please continue to ask] o( o

Beginners can buy a regular racket.