What to do if the Mac keyboard is flooded, and how to recover the Mac computer keyboard if it is flo

When the Apple computer gets into the water, turn it upside down as soon as it happens, don't let the water flood go in, and you must not plug it in. Put it in a place with a breeze to dry, blow it with a hair dryer the next day, and turn it on again after a few days.

Emergency treatment method of computer water ingress:

Cut off the power immediately; Remove external devices;

Water ingress on the keyboard surface: inverted placement;

Water ingress at the bottom of the computer: put it on its side or stand still;

Timely contact for repair; After taking emergency measures, please send your computer for inspection and repair immediately. Don't think that if you leave it for a while, you can use it normally when the machine dries, the longer you put it, the more parts the liquid will likely erode and only cause greater losses;

First, immediately turn off the power to your laptop's system and remove the power cord as well as the battery.

Use a clean cloth or tissue paper to wipe the liquid off the surface of the laptop keyboard and the machine.

Move the laptop near the sink and tilt the laptop 90 degrees to pour out any liquid remaining inside the computer system and keyboard.

Use a clean cloth or tissue paper to wipe the liquid on the keyboard and the surface of the machine again.

Do not use a hot air dryer to dry to avoid overheating and deformation of the casing.

It is recommended to contact the customer service center of the notebook manufacturer immediately and arrange inspection and maintenance to avoid sudden failures caused by oxidation and rust.

What should I do if the desktop keyboard is out of order due to water ingress.

The specific solutions to the Mac keyboard are as follows:

1. After the computer keyboard enters the water, first cut off the power supply immediately and shut down the computer.

2. Then turn the computer over and pour out the water.

3. After pouring out the water, choose to use a hair dryer to dry the keyboard, or air dry naturally.

4. Restart the computer after the water is dry, see if there are bad keys on the keyboard and cannot be used, if you choose to return to the factory for repair. After disassembling it, it was found that the structure of the keyboard inside was simpler than that of a normal PC. In addition to the keys and the corresponding soft plastic keys underneath, there is an iron plate (which should know why the keyboard is so heavy), and there are countless screws on the iron plate, and after unscrewing them one by one, you can see the circuit board.

In fact, this circuit board is very simple, with two layers up and down, and it goes differently. I could see that the water was black on the next layer of the board. In fact, the easiest way is to scrape off a layer of green film on both sides of the blackened part to expose the copper electrical wiring.

Then find a section of wire, ask for the kind of one with a lot of filaments, pull out the copper core inside, use the kind of very thin copper wire, connect the two parts of the wire, and then glue both sides with transparent tape, pay attention to the middle part not to stick. That's basically it, and then install it, and you can use it.

1. Immediately cut off the power and forcibly shut down the computer. Once the keyboard is flooded, immediately cut off the power supply, forcibly shut down, to prevent the possibility of short circuit, if the computer is still running on power, not only will it cause the keyboard keys to fail, but also burn the CPU and motherboard, 2, put the notebook upside down on the desktop for 5 minutes. Let the water that has entered the inside of the laptop flow back a little bit to stop penetrating the core of the machine, and then continue to dry the keyboard.

3. Carefully wipe the surface of the keyboard with a highly absorbent towel, wipe it clean in the subtle gaps, and make sure that there is no liquid left on the surface.

4. Give the computer a dry and ventilated space to dry or hair dryer.

Blow dry. 5. The computer can be used normally, and if some keyboard keys fail, the keyboard can be replaced, and if there is a problem with the whole machine, it is recommended to send it for repair immediately.

As long as there is no slag spilling water on the small hole next to the MAC keyboard, it will not enter the water, the keyboard is waterproof and splash-proof, and then the water can flow out through the small hole in the bottom plate, which is called waterproof.

If you accidentally spill water or other liquid on your MacBook keyboard, you need to clean the surface of the liquid super quickly. Immediately cut off the power supply and remove the battery. Then open the lid of your computer and place it upside down to let the liquid flow out slowly.

Don't shake it, and don't lay it flat, you need to leave it dry. Use paper or a dry cloth pad underneath the machine to absorb water, and replace it when needed and when the beams crack.

No matter what the computer splashes, don't turn it on for 72 hours, and make sure the machine is dry before starting.

According to the direction of the water intake, quickly pour out the water, and then use a dry towel to wipe the water on the keyboard with a paper towel.

1. You need to unplug the power of the notebook immediately, and take out the battery, the speed of the notebook power off determines the degree of damage to your notebook, remember not to click on the computer to turn off normally, so that the moisture will flow into the inside through the keyboard, causing great damage to the notebook.

2. The keyboard is more seriously watered, you need to remove the keyboard of the notebook, and then see if the water has entered the motherboard inside the computer, first of all, you need to use a paper towel to wipe the water on the front and back of the notebook keyboard clean, and then use a hair dryer to dry the keyboard traces with cold air.

3. MacBook is Apple Inc. in 2015.

Laptops from the company.

On March 9, 2015, Apple's spring conference was held in San Francisco, USA.

Yerba Buena Green Art Center was held. At the press conference, Apple focused on the release of the new MacBook 12-inch new model, with a new design, divided into gray, silver, and gold three colors, 12-inch Retina graphics resolution of 2304 x 1440, and the processor is Intel Core M low-power processor. The new MacBook weighs about kilograms and millimeters thick, which is more than the current 11-inch MacBook Air

24% thinner. The motherboard is 67% smaller than the previous version.

It's definitely not going to be fine, if it's turned on normally or something, it may just be that the water hasn't flowed to the key components yetStep 1

Be sure to unplug the laptop immediately, and take out the battery, the speed of the laptop power off determines the degree of damage you assess the degree of damage to the European notebook, remember not to click on the computer to shut down normally, then the moisture will flow through the keyboard inside, causing great damage to the notebook.

Step 2

Then according to the direction of the water intake, quickly pour out the water, and then use a dry towel to wipe the water on the keyboard with a paper towel.

Step 3

If your Apple notebook keyboard is more seriously watered, you need to remove the notebook keyboard, and then see if the moisture has entered the motherboard inside the computer, first of all, you need to wipe the moisture on the front and back of the notebook keyboard with a paper towel, and then use a hair dryer to dry the keyboard with cold air. The keyboard needs to be disassembled and cleaned with alcohol, otherwise it will corrode the internal circuitry.

Step 4

Then completely disassemble the motherboard, if you don't know how to disassemble it, you can go to the special after-sales maintenance point of the evaluation Europe, it will conduct a detailed inspection of the degree of water ingress in your notebook, if it is serious, it will remove the motherboard, see who does it if there are water stains on it, see if the circuit of the motherboard is burned out, if the motherboard is also water, you can wipe the water on the motherboard with pure alcohol, and then dry the motherboard or use a hair dryer to dry it.

Step 5

Then clean the moisture of the inner shell of the notebook, dry it in the ventilated place of the motherboard and keyboard house that has just been wiped dry, and then wait until all the parts are dry, you can ask a special maintenance personnel to assemble it, and then power on the test, do not turn on the computer before it dries.

1. First of all, power off as soon as possible, and then remove the built-in battery of the notebook to prevent internal short circuit and burn out the hardware;

2. If you are familiar with the disassembly of the computer, you can disassemble the hardware that can be disassembled, such as the notebook keyboard, hard disk, memory, etc.;

3. Then check whether the water inside the notebook is serious, if there is obvious water ingress inside the notebook, you can use alcohol or absorbent paper to clean these up.

The MacPro keyboard itself is not waterproof.

If it is damaged externally, it can be wiped dry. If it is damaged internally, whether it can be displayed normally or not, the power should be immediately turned off, the power should be turned off, and the water traces on the surface should be wiped dry. Remember not to try to power on or on again, as this will maximize the possibility of the original being burned out.

The keypad is upside down to prevent water from continuing to penetrate inside. If possible, you can find a set of screwdriver tools for disassembling the Apple notebook, remove the screws on the back shell of the Apple notebook, open the back shell, unplug the connection cable on the battery, and gently wipe the surface.

At the same time, contact the Department of Apple maintenance and make an appointment for maintenance. In order not to harm the motherboard and other hardware, it is recommended to bring the computer to a regular Apple customer service center for inspection and repair.

It is very important to turn off the power immediately after the water has entered!

Then immediately dry the moisture on the outer surface, if you can disassemble it, you can disassemble it and blow it with a hair dryer, to ensure that the surface is completely free of moisture, and the distance should be far away when blowing, not blowing in one place.

At this time, you should turn on the electric blanket, put it on the electric blanket, and then cover it with a quilt and dry it overnight, and then you can start it and try it!

If you really can't dismantle it, you can also put it on the electric blanket and dry it overnight!

If you don't have an electric blanket, you can wrap two layers of black cloth and put it in an open carton to expose it to the sun for a day!

If the above methods do not work, then you can only send it to the repair shop for repair!