How to set up the local area network of the router and how to set up the local area network router

1. How to connect the network cable:

The network cable from the cat is connected to the WAN port of the router (it should be the blue one), and the remaining 4 yellow ports are connected to two computers at random.

2. Route settings:

tp-link gateway: username: admin, password admin; After entering, look at the setup wizard on the left, enter -- see 3 options, select the dynamic IP mode, and the next step is OK.

3. Restart the cat and wait 1 minute before turning on the router. Then, go to the routing gateway, you look at the running status, if you get the beginning one, it's no problem.

Generally, the computer does not need to be set up, and all of them automatically obtain the IP.

Use a network cable to connect the wireless router to the computer, of course, you can also use the wireless search connection directly, but it is recommended for beginners to use a network cable to connect directly. After connecting, open the browser, it is recommended to use IE, enter it in the address bar to enter the settings interface of the wireless router.

You need to log in before you can set other parameters, the default login username and password are admin, you can refer to the manual (the simplest is to directly look at the instructions on the shell of the routing period).

After successful login, select the Setup Wizard screen, which will automatically pop up by default.

After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and you can click Next directly.

According to the setting wizard step by step setting, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, then choose the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection.

Enter the password you received from your network service provider, and go directly to the next step after entering.

3. Restart the wireless router after the settings are complete.

Next, go to the wireless settings, set the SSID name, this item defaults to the model of the router, this is just the device name displayed when searching, you can change it according to your own preferences, easy to search and use. The rest of the setting options can be defaulted according to the system and do not need to be changed, but a password must be set in the network security settings to prevent being rubbed on the network. Once the setup is complete, click Next.

At this point, the setup of the wireless router is complete. Restart your router and you're ready to connect to the Wi-Fi.

Of course, you can use routes to connect to the local area network.

Aren't you able to access the Internet on two computers at the same time? This indicates that your LAN is already up and running.

If there are some LAN operations that cannot be completed, there should be a lack of protocol or permission setting issues.

You first add the IPX protocol.

The main thing is what you're going to do, your LAN has been built.

Add the IPX protocol, and then the local connection attributes, and then select Install, select a protocol inside, there is an IPX SPX protocol in it, and you can add it.

By setting a wireless router on a local area network, it is possible to access the Internet through wired terminals such as computers, as well as devices that support wireless Internet access, such as mobile phones and tablets? The setting method of the LAN router is actually very simple, let me tell you below!

How to set up a local area network router.

1. Nowadays, users use network cables or optical cables to dial-up the Internet, and the broadband speed is generally more than 1 megabyte. After the ADSL provided by the telecom or China Unicom service provider enters the home, there is an optical modem or ADSL model on the network. Plug the Internet port of the wireless router into the exit of the optical modem network cable.

The following figure shows the schematic diagram of the network connection.

2. Enter the IP address of the router in the browser on the computer, as shown below.

3. Enter the administrator name and password of the router. Go to the router configuration page.

4Click on the Setup Wizard and click "Next" on the pop-up page.

In the pop-up page, select the top option, "Let the router automatically choose the Internet mode", and click "One step down" after selection.

Fill in the Wi-Fi user name, Wi-Fi encryption method, Wi-Fi password, and other information on the page. Click "Next".

The router is set up. Click "Done".

Let's talk about how to connect to wifi on your phone. Turn on Wi-Fi in your smartphone's system settings.

Choose the wifi signal you are told about or your home.

Enter the password for the Wi-Fi signal.

After entering the password, tap Connect to WiFi.

The wifi signal is successfully connected on the mobile phone. end