What is the difference between particleboard and MDF? Which one is best to use when making furniture

Particleboard: Okay, I'm going to use it now.

1. Advantages and disadvantages of particleboard:

Advantages: (1) Good sound absorption and sound insulation performance; Particleboard is insulated and sound-absorbing;

2) The inside is granular with a cross-staggered structure, the performance of each part is basically the same, and the transverse bearing capacity is good;

3) The surface of the particleboard is smooth, the texture is true, the bulk density is uniform, the thickness error is small, the pollution resistance, the aging resistance, the appearance is beautiful, and various veneers can be carried out;

4) In the production process of particleboard, the amount of glue used is small, and the environmental protection coefficient is relatively high.

Disadvantages: (1) The inside is a granular structure, which is not easy to mill;

2) It is easy to cause the phenomenon of tooth burst when cutting the plate, so some processes have higher requirements for processing equipment; It is not suitable for on-site production;

3) The quality of particleboard on the market is uneven, and the environmental protection of inferior particleboard is very poor, and the formaldehyde content exceeds the standard, but with the country's attention to environmental protection, the environmental protection of high-quality particleboard has been guaranteed.

Second, the advantages and disadvantages of MDF:

Advantages: (1) MDF is easy to finish. All kinds of coatings and paints can be evenly coated on the MDF, which is the preferred substrate for paint effect.

2) MDF is also a beautiful decorative board.

3) All kinds of veneer, adhesive film, veneer, light metal sheet and other materials of MDF can be glued on the surface of MDF.

4) The hard density board can be punched and drilled, and can also be made into sound-absorbing boards, which are used in the decoration engineering of buildings.

5) Excellent physical properties, uniform material, no dehydration problem.

6) MDF has good nail grip power.

Disadvantages: (1) The biggest disadvantage of MDF is that it is not moisture-proof, and it swells when it sees water. When using density skirting boards, door sleeve boards, and window sill boards, you should pay attention to painting on all sides, so that they will not be deformed.

2) The expansion rate of MDF when exposed to water is large, the deformation is large, and the long-term load-bearing deformation is larger than that of homogeneous solid wood particle board. Although MDF has poor moisture resistance, the screws will not loosen after screwing, and it is easy to fix again.

The main differences are that the properties are different, the main components are different, and the characteristics are different, as follows:

First, the nature is different.

1. MDF.

MDF is a kind of medium-density fiberboard (wood-based panel), which is an environmentally friendly furniture and building materials substitute for logs that uses agricultural leftovers or sub-small fuelwood as the main raw materials, and is formed after hot grinding, drying, sizing, paving, hot pressing, post-treatment, and sanding.

2. Particleboard.

Particleboard, also known as particle board, is a kind of wood-based board made by cutting various branches and buds, small wood, fast-growing wood, sawdust, etc. into pieces of a certain specification, drying, mixed with rubber, hardener, waterproofing agent, etc., and pressed under a certain temperature and pressure.

3. Melamine board.

Melamine board, referred to as cyanamide board, the full name is melamine impregnated adhesive film paper veneer wood-based panel. It is a decorative board made by soaking paper with different colors or textures in melamine resin adhesive, then drying to a certain degree of curing, and laying it on the surface of particleboard, moisture-proof board, MDF, plywood, blockboard, multi-layer board or other hard fiberboard, and hot-pressing.

Second, the main ingredients are different.

1. MDF.

Its main components are wood fiber, resin glue, etc.

2. Particleboard.

The raw materials used to make particleboard include wood or wood fiber materials, adhesives and additives, the former accounting for more than 90% of the dry weight of the board. Timber raw materials are mostly harvested from forest timber, small diameter timber (usually less than 8 cm in diameter), harvesting residues and wood processing residues. Processed into sheets, strips, needles, granular wood chips, wood shavings, wood silk, sawdust, etc., called scraps.

3. Melamine board.

The substrates are particleboard and MDF, multilayer board. Generally, it is composed of surface paper, decorative paper, covering paper and bottom paper.

Third, the characteristics are different.

1. MDF.

The main advantages are that it is relatively low compared to logs, easy to process, uniform material, good physical properties, and can be waterproof and moisture-proof after adding paraffin wax and other items.

2. Particleboard.

In the production process of particleboard, the amount of glue used is small, and the environmental protection coefficient is relatively high. The structure is relatively uniform, the processing performance is good, the surface is flat, and various veneers can be carried out.

3. Melamine board.

The main advantages are that the surface is flat, because the double-sided expansion coefficient of the plate is the same and not easy to deform, the color is bright, the surface is more wear-resistant, corrosion-resistant, and economical.

MDF and particleboard are the substrates, and these two substrates become melamine boards after being pressed with melamine impregnated paper at high temperatures.

MDF is medium-density fiberboard, which is a man-made board made of wood fiber or other plant fibers as raw materials and applied urea-formaldehyde resin or other applicable adhesives.

Particleboard, also known as chipboard, is a board made of wood or other non-wood plants processed into shavings or scraps, and hot-pressed with adhesives and other additives.

The biggest difference between MDF and particleboard is the size of the particles of the materials that make up the board, MDF is fibrous wood, and particleboard is granular wood.

Whereas, melamine board is a general term. As long as it is a board with melamine paper (including MDF, particleboard, multi-layer board, blockboard, etc.) can be called melamine board.

Hope it helps.

First, the characteristics of the two are different:

1. The characteristics of high-density fiberboard: the texture of the board surface is fine and smooth, and the dimensional stability is good when the ambient temperature and humidity change, and it is easy to decorate the surface. The internal structure is fine, especially with dense edges, which can be processed into various special-shaped edges, and can be directly coated without edge banding, which can achieve a better modeling effect.

2. The characteristics of particleboard: it has good sound absorption and sound insulation performance; Particleboard is insulated and sound-absorbing; The interior is granular with a cross-staggered structure, and the performance of each part is basically the same, and the transverse bearing capacity is relatively poor. The surface of the particleboard is flat and can be veneered in a variety of ways; In the production process of particleboard, the amount of glue used is small, and the environmental protection coefficient is relatively high.

Second, the density of the two is different:

1. The density of high-density fiberboard: the density is usually above 800kg m.

2. The density of particleboard: particleboard is divided into three kinds of particleboard according to the product: low density (gram cubic centimeter), medium density (gram cubic centimeter), and high density (gram cubic centimeter), but usually the density of particle board is gram cubic centimeter.

Third, the use of the two is different:

1. The use of high-density fiberboard: it is widely used in indoor and outdoor decoration, office, high-end furniture, audio, and interior decoration of high-end cars, and can also be used as a production material for antistatic flooring, wainscoting, anti-theft doors, wall panels, partitions, etc. in computer rooms.

High-density fiberboard is also a good material for packaging. In recent years, it has replaced high-grade hardwood and directly processed into composite flooring, laminate flooring, etc., which is widely used in interior decoration, and its smooth surface, solid texture and long service life have been praised by users.

2. The use of particleboard: it can be processed into large-format boards according to needs, and it is a better raw material for making furniture of different specifications and styles. The finished particleboard does not need to be dried again, it can be used directly, and the sound absorption and sound insulation properties are also very good.

However, it also has its inherent drawbacks, because the edges are rough and easily absorb moisture, so the process of furniture edging made of particleboard is particularly important. In addition, due to the high density of particleboard, the furniture made from it is also heavier than other boards.

Nowadays, many of the furniture in Chunyou are veneer furniture, what are the advantages and disadvantages of veneer furniture, let me explain it to you today.

1. Advantages: 1. There are few processes for veneer furniture, and the cost advantage is much better than that of solid wood furniture, which is cheaper.

2. The appearance of veneer furniture has the natural closeness of solid wood furniture, and it is not easy to deform and has good stability. There are also a lot of varieties of flowers.

2. Disadvantages: 1. Low strength and easy breakage; Formaldehyde emission is high and not environmentally friendly; If MDF is used as the base layer, it is susceptible to moisture mildew.

2. Also because it is a finished board, the shape and texture are a little limited when pasting, so the aesthetics are relatively low.

3. It cannot have beautiful shapes and various lines like solid wood furniture, so this kind of Janesen furniture is almost composed of geometric plates, with sharp edges and corners, and rigid lines.

Fiberboard, also known as MDF, is a kind of man-made board made of wood fiber as raw material, adhesive and other additives as auxiliary materials, and post-processing such as chemical treatment and mechanical separation. After artificial treatment, it has a more uniform density than natural wood and a flatter surface that is easier to cut. In addition, due to the role of additives, its antiseptic effect has also been significantly improved, and its ** is much cheaper than natural wood, so fiberboard is widely used in home decoration and is very popular with consumers.

So what about fiberboard**? Due to the different raw materials, additives and processing technology of different fiberboards, the first grade of fiberboard also has different grades. Let's take a look at the different types of fiberboard**.

Fiberboard**

Yihuang formaldehyde-free MDFThis kind of fiberboard is made of pine wood as raw material, its moisture content is 3% 13%, and the apparent density is 760 kg per cubic meter. This fiberboard has a flat surface and fine fiber, which can be widely used in bathroom furniture, flooring, cabinets, packaging boards and other fields. Reference**92 yuan a piece.

Huaneng cement fiber boardThis fiberboard is made of plant fibers, siliceous and calcareous materials, and it is a building material. This fiberboard specification is 1200*2400 mm, which is an ideal fireproof and insulating material, and can be widely used in all kinds of buildings. Trace town reference**50 yuan a piece.

Long-strength high-density ceramic fiberboardThis kind of ceramic fiber board is processed from high-quality ceramic fiber cotton as raw material. It has the characteristics of low thermal conductivity, and can be widely used in heat treatment systems and energy-saving materials, and is an ideal thermal insulation material. The reference price is one kilogram.

Shanghai Beiyou high-quality environmentally friendly polyester fiber boardThis fiberboard is made of 100% polyester fiber, and the specification is m * m * 9 mm. Polyester fiber board has the advantages of noise absorption, environmental protection and flame retardant, strong impact resistance, easy construction, simple maintenance, etc., and is widely used in classrooms, KTVs and other fields. Reference**30 yuan per square meter.

What is the difference between fiberboard and particleboard?

Particleboard, also known as particle board, is a kind of scrap made by pressing solid wood scraps and other materials, and also belongs to man-made boards. Because it is pressed, the density is larger than that of fiberboard, the water absorption capacity is weaker than that of fiberboard, and the moisture resistance is better than that of fiberboard. Due to the small amount of glue, its environmental protection coefficient is higher than that of fiberboard.

The nail eating performance of fiberboard is worse than that of particleboard, and fiberboard is easy to absorb water and swell, so it is usually not used as a box. The surface of the particleboard is flat and can be veneered in a variety of ways. Therefore, particleboard is mostly used for panel furniture.

In general, the fiberboard wood is delicate, not easy to open the glue, and easy to shape, can be widely used in a variety of home decoration fields. The above is the relevant information about the fiberboard for you, if you still want to know more about the relevant information, welcome to pay attention to Tuba Rabbit!

You can get it for free