What is the best substance to use for Tidi film? What can be replaced with a flute membrane

The flute film can be replaced with tissue paper or plastic paper, plastic bags, tender film in onions. The flute membrane refers to the flute that is attached.

On the second hole at the left end, there is a film that vibrates and makes sounds when playing the flute, which is taken from bamboo.

or the stem of the reed, usually in order to keep the film fresh, you can put it in the refrigerator.

The flute membrane is a characteristic of the Chinese flute. After being passed to Korea, the daqin evolved into a dire that inherited the flute membrane. The earliest Chinese flutes were not diaphragm.

The vibration of the flute membrane produces a brighter, more transparent tone. At present, most of the Chinese bamboo windwind and qi instruments use flute membranes, and the bamboo wind instruments that are not used are new flutes, flutes, mouth flutes, etc.

The reason why the flute is different from the flute is that the flute membrane can regulate the sound, while the flute does not use the membrane. This film is taken from the stems of bamboo or reeds. Bamboo film is cheaper, but it is easy to break, and the sound is not as crisp as the reed film, so it is better to use the reed film.

When purchasing, you should choose an off-white, more transparent film, blue or yellowing is too tender, too old.

Most of the membrane pores of the flute are small to be suitable, not necessarily, and are closely related to the flute membrane used. The shape of the membrane pores plays a decisive role in the diaphragm. A good membrane hole is oblong, the arc is as soft as possible, and the delicacy of the membrane hole determines the accuracy of the film and the difficulty of adjusting the film.

The film is applied by applying the appropriate amount of mucus evenly around the membrane holes, without overexerting force to avoid damaging the flute.

How to put a good flute film? What kind of flute film is good?

Hello, the Chinese flute is open and filmed, making its crisp and bright timbre different from any kind of flute in the world, which is the unique structure of the Chinese flute. The quality of the flute membrane is directly related to the timbre and volume of the flute, which is a very important thing for those who play the flute. Most of the flute membranes are reed membranes (a layer of film in a hollow rod of reeds).

Years of artistic practice have proved that reed film is the best material for film making. The reed film is young, old, thin and thick to distinguish its good from bad. The tender texture is thin, transparent and shiny.

The old ones are thick, rough and yellowish. It is better to use a tender film for flute. After the flute film is selected, it is necessary to carry out a meticulous pasting work.

Before pasting, use a knife to break the flute membrane into rectangular pieces, and then pull the original stripes of the flute membrane to both sides with both hands until the flute membrane appears to become a perpendicular stripe in the direction of the original flute membrane, and then it can be pasted. Paste can be ejiao, peach gum, baiji, etc., first wet the colloid, and gently apply it around the membrane hole. Then hold the flute body with your left hand, and hold the membrane in your right hand and stick it to the membrane hole in the correct direction.

When the flute membrane touches the membrane hole, first press the flute membrane along one side of the flute body with the thumb of the left hand, then use the right hand to pull out the fine lines of the membrane, and then use the right thumb to press and smooth the other side of the membrane. After gradually attaching it, gently press the flute membrane on both sides of the membrane hole with the thumbs of both hands, and gently wipe it on both sides of the flute body at the same time. Pay attention to adjust the tightness of the flute membrane, and if the belt is destroyed and tightened, the timbre will be wooden and not bright; If it is too loose, the timbre is hoarse and sandy, and the treble cannot be blown up.

Therefore, it is necessary to adjust it while trying to blow before the glue dries. If you find that the flute membrane is too tight, you can dip the membrane slightly on the edge of the membrane hole, and then gently press the flute membrane with your index finger to adjust it gradually. After a period of use, the tightness of the flute film will often be affected by changes in climate and temperature.

In this case, there is generally no need to reapply the film. If it's too tight, you can use the methods mentioned above to restore it; If it is loose, you can first warm it to the flute membrane to moisten it, and then blow it naturally or dry it with body temperature, and repeat it several times to recover.

1. The flute film is pasted on the second hole at the left end of the flute, and the film vibrates and makes sound when the flute is played, which is taken from the stem of the bamboo or reed, and can be put into the refrigerator to keep the film fresh;

2. One of the reasons why the flute is different from the flute, in addition to the difference in holding, is that the flute membrane can regulate the sound, while the flute does not use the membrane;

3. The flute film is taken from the stem of bamboo or reed, the bamboo film is cheaper, but it is easy to break, and the sound is not clear and brittle of the reed film, so it is better to choose the reed film.

1.Go to the pharmacy and buy a small piece of ejiao (the size of your thumb nail is enough, about 2 yuan), or simply ask for a few pieces of white glue to stick the flute film. Because they all contain sticky substances that can stick to the flute membrane, it is recommended to use ejiao, which is used for a long time, and most of the players whether they are amateurs or professionals use ejiao.

Some musical instrument stores also sell something called "flute gum", some of which are made of ejiao into lipstick, which can be used retractable; Some are bottles of liquid like nail polish packaging. It really doesn't work, garlic juice can also be used.

2.Select the flute film.

At present, reed film is mostly used. There are also those that use bamboo membranes and casings, but it is said that the timbre is not added. Choose a brightly colored reed film, not a yellowed old reed film.

Some professionals also recommend a thinner membrane for playing the flute and a thicker membrane for the horn. If your G flute is short, it's a bangdi.

3.Handle the diaphragm.

Cut the flute membrane into small segments of 2 cm (tubules), break the tubing to form small squares the size of the thumb belly, and roll it into small balls or roll them in small rolls in the vertical direction of the reed fibers, with the aim of making the flute membrane fold.

4.Mucous flute membrane.

Dip a drop of water with Ejiao (or Baiji) and evenly coat it around the membrane hole (note, the mucus should not stick to the inner wall of the membrane hole, even if it sticks, wipe it off with your little finger), the flute membrane is a small ball, gently pull the four corners, the direction of the flute membrane fiber and the bamboo flute fiber should be consistent, stick one side on the edge of the membrane hole, and then gently flatten the flute membrane with the thumbs of both hands, so that the flute membrane is covered on the membrane hole, and the fold texture pulled out with the thumb should be perpendicular to the flute body (note, the folds are only undulating and must not overlap), and the flute membrane will be pasted.

5.Supplement. The effect of the flute film paste has a lot to do with the timbre, and if the film is too tight, the sound will be muffled and uncrisp; If it is too loose, the sound will be broken, and the treble will not be easy to blow. The above mentioned flute film color, thinness, tightness, to what extent is suitable, but also rely on their own continuous practice and exploration, it is best to have the guidance of industry insiders, only by written words can not be accurately described.

If not, use the most traditional method --- use saliva, eat a piece of sugar (to increase the viscosity) and then spit the saliva around the flute hole, (the thicker the better) on the inside side of the flute membrane, gently wipe it with toilet paper, and wipe the rest off. Dry it naturally.