Cosmetics how to see if there is mineral oil

Identification method: Method.

1. Take a glass of water, and then take an appropriate amount of cosmetics and put it in clean water for a period of time, if it floats on the water, it means that it contains mineral oil.

Method 2, 1, apply the comparison product evenly on the back of your hand and wait for a while.

Once the product is almost completely absorbed, pour the powder evenly onto the back of the hand on which the product has been applied, and then flip the back of the hand. If you see a lot of crushed powder and it sticks firmly, it means that the product contains a lot of mineral oil.

Method 3, 1, use 1 piece of ordinary white paper, apply the product on the white paper and spread it, after 10 minutes, observe the absorption degree of the paper.

2. Stand for 10 minutes and then observe the white paper, and find that the moisture in one product has evaporated, the paper begins to return to its original state, and the paper coated by the other product begins to slowly penetrate, showing a transparent state, which is the effect of oil on the paper, and the light situation is as follows.

The method is as follows: 1. Use an ordinary white paper, apply the product to the white paper and spread it, and after 10 minutes, observe the absorption degree of the paper.

2. Let stand for 10 minutes to observe the white paper.

3. After the white paper dries, if there is a deep oil mark, it means that there are minerals. If there is no residue, just a slight trace of water drying on the paper, then there is none.

As the name suggests, mineral oil is an oil extracted from minerals, also called liquid paraffin.

What kind of minerals are it from, of course, it is oil, coal and other substances, it is a little scary to think about, but don't be afraid, many of the flavors in the perfume we use are also aromatic hydrocarbons extracted from petroleum. Oil is a treasure.

Mineral oil has very poor permeability, and good sealing, which is difficult to be absorbed.

Therefore, the main ingredient of many brands of baby oil is high-quality mineral oil, which takes advantage of the extremely poor permeability of mineral oil.

Therefore, some people say that mineral oil will be absorbed and harmful to **, which is not true.

There is no ban on the use of such ingredients in baby products.

So why do many people get acne and other adverse reactions when they use products containing mineral oil?

That is caused by the excellent sealing property of mineral oil, resulting in ** can not breathe, pores are blocked, it is easy to acne, but this also varies from person to person, I use any product containing mineral oil, there is no problem at all, but a friend of mine, where the edge of the mineral oil is stained, it will be acne.

Therefore, it is recommended that you do a test before trying it out, or go to a professional beauty place such as Qianqianshi and consult a makeup artist.

Let them teach you how to choose for your skin type.

It is worth mentioning that the products that use this characteristic of mineral oil basically have a very strong moisturizing effect, and the sealing effect is quite good.

Cosmetics how to see if there is mineral oil

1. Know the advantages and disadvantages of creams when they encounter fire.

Creams are a very important part of our daily care routine, they provide adequate nutrients to the skin and form a protective film to prevent the moisture from evaporating.

Many products on the market contain a small amount of mineral oil that is allowed to be added internationally, mineral oil is the product of asphalt and asphalt refining after petroleum refining, and its function is to lock in moisture from the surface, but once the mineral oil exceeds the standard, the oil will clog the pores, and skin problems such as beans and dark spots will emerge in endlessly.

There are also good ways to detect creams.

Take a small amount of cream and put it in a spoon, heat it with an alcohol lamp or candle, and the product that meets the criteria will be like the state formed by boiling milk, the taste will not change, and it will be more intense.

If there is splashing, thick smoke during combustion, the smell becomes choking, and there is oil residue at the bottom of the spoon after burning, it means that the mineral oil exceeds the standard or has boride filling.

2. Test emulsion with water.

In autumn and summer, many people often use lotions instead of creams, but lotions often contain a small amount of oleraceates, which are easy to clog pores, resulting in dryness and lack of water, and pores will gradually enlarge over time.

To test whether it contains oletholates, a glass of water can give the result.

Pour the appropriate emulsion into the water, such as the emulsion floats on the water, to prove that it contains oil stone esters, and then shake gently, if the liquid becomes milky white, it means that the emulsion contains an emulsifier, the emulsifier is a surfactant, they will destroy the tissue structure of the emulsion, cause sensitivity, and have strong carcinogenicity.

On the contrary, if it is poured into water, the emulsion sinks to the bottom, which proves that it does not contain petroleum esters, and consumers can use it with peace of mind.

Skincare products containing mineral oil can be used.

Mineral oil has good sealing, strong moisturizing effect, stable and safe performance, and can be said to be a good raw material for cosmetic oils. Its moisturizing effect is undeniable, but it is not very suitable for young skin, and is more suitable for children or the elderly who produce little to no oil themselves. In addition, it can also be used by people who have very little oil secretion and are prone to dryness and lack of water.

Hazards of mineral oil to **:

1.Clogged pores.

People who secrete more sebum and sweat a lot use cosmetics containing mineral oil, which will make sebum and sweat unable to be discharged from the body normally, and feel stuffy and breathable, which will cause acne, acne, blackheads and clogged pores.

2.Melanin deposition.

Mineral oil has a relatively strong heat accumulation, has the characteristics of heat absorption and double ultraviolet absorption, and is easy to cause the deposition and activity of melanin, thus forming pigmentation.

3.Difficult to clean.

Mineral oil also has strong adhesion, which is easy to absorb external dirt, making it dirtier and more difficult to clean.

The white ore in cosmetics is mineral oil.

The specific explanation about white mineral oil is as follows:

1. White mineral oil is a colorless, odorless and transparent liquid, with special plasticity, lubricity and heat preservation, which can be made into items for humans and animals to absorb or swallow.

2. The classification of white mineral oil is usually classified according to the purity of its saturated hydrocarbons, and the commonly used ones are industrial grade white mineral oil, cosmetic grade white mineral oil, medical grade white mineral oil, food grade white mineral oil, etc. Different types of white mineral oil also differ in their uses.

3. Industrial white mineral oil grade white mineral oil is obtained from the base oil produced by hydrocracking as raw material, which can be used in chemistry, textile, chemical fiber, petrochemical, electric power, agriculture, etc., and can be used in the production of PE, PS, PU, etc.

4. Food-grade white mineral oil is obtained from mineral oil as the base oil, which is processed by deep chemical refining, edible alcohol extraction and other processes. It is suitable for the lubrication of processing equipment in the food industry such as grain and oil processing, fruit and vegetable processing, dairy product processing, bread cutting machine, etc., and should be used for food glazing, anti-sticking, defoaming, planing, sealing, and can be used as a release agent for macaroni, bread, biscuits, chocolate and other foods, and can prolong the storage and preservation period of wine, vinegar, fruits, vegetables, and canned food.

5. Medical-grade white mineral oil, suitable for the pharmaceutical industry, can be used as an internal agent for the production of laxatives and a defoamer for the production of penicillin. Cosmetic grade white mineral oil is obtained by deep refining of raw materials with orange and hydrogen. It is suitable for the cosmetic industry, and can be used as the base oil of hair cream, hair oil, lipstick, face oil, skin care oil, sunscreen, baby oil, alabaster and other ointments and softeners.