What does it mean to turn left to make a big turn, and turn right to a small turn

Updated on tourism 2024-03-11
16 answers
  1. Anonymous users2024-02-06

    Turn left and turn big turnsThat's itTurn left at the intersectiontime,The turning radius is a bit largerKeep going straight and turn left when you reach the center of the intersection.

    Turn right and make a small turnIn order not to affect the passage of vehicles going straight and reduce the probability of accidents. After making a right turn, turn onto the rightmost lane, there is a need to change lanes after turning and then changing lanes.

    The benefits of a left turn to a big turn.

    1. Wide line of sight and no distraction.

    If you follow the route of the big bend, turn the big bend, keep to the right, and basically go through the left to right lane before you start to turn left, then your vision will be wide. Turn left to give way to vehicles going straight.

    2. Save time when there are many cars.

  2. Anonymous users2024-02-05

    For the sake of traffic safety, vehicles should turn left, right, big and small to avoid collision with non-motorized vehicles.

    Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China:

    Article 51 Motor vehicles shall pass through intersections controlled by traffic lights in accordance with the following provisions.

    Turn left and turn left at the center point of the junction. Turn on your turn signals when cornering and your near lights when driving at night.

    Article 68 Non-motorized vehicles shall pass through intersections controlled by traffic lights in accordance with the following provisions.

    Center point of the intersection of left and right turns:

    When a right-turning vehicle will be less because the turning radius is too large to affect the vehicle, go straight, and then the right-turning vehicle will go straight to the rightmost lane without affecting it, if it becomes the middle lane, or the leftmost lane, then it will affect the vehicles in the other lane.

  3. Anonymous users2024-02-04

    Left turn to big bend refers to driving all vehicles that drive normally on the right, and when entering the intersection, you must drive through the center line of the road before driving to the left, if you turn left without crossing the center line, it will become a reverse drive, which is easy to cause traffic accidents;

    A right-turn is when you enter an intersection with your vehicle directly to the right and try to drive to the right rather than near the centre line of the road.

  4. Anonymous users2024-02-03

    Turn left to big turn, turn right to small turn, so that the two cars don't collide together, China drives on the right, so turn left to turn big turn, right turn to small turn, thank you.

  5. Anonymous users2024-02-02

    It is because China drives on the right, in order to avoid occupying the lane of the opposite car, so when turning right, you should turn as small as possible, and turning left cannot drive to other people's roads, so you turn big. It's basically your understanding.

  6. Anonymous users2024-02-01

    Left turn to big turn, right turn to small turn, why is it so stipulated, it turns out that it really makes sense.

  7. Anonymous users2024-01-31

    Turn left and do not press the deflector line.

  8. Anonymous users2024-01-30

    Legal Analysis: Correct. When turning left and right, the priority of turning right is lower than turning left, because there are many more chances of turning right than turning left, turning right does not need to look at traffic lights in many places, and turning left is a long time to wait for traffic lights, so when turning right at the intersection, you must give way to the vehicle turning left when turning a small turn, and do not collide with the vehicle turning left.

    Legal basis: Road Traffic Safety Law of the People's Republic of China

    Article 35 Motor vehicles and non-motor vehicles shall pass on the right side.

    Article 36 Where roads are divided into motorized lanes, non-motorized lanes and sidewalks according to road conditions and traffic needs, motor vehicles, non-motorized vehicles and pedestrians shall be separated from each other. If there is no division of motorized lanes, non-motorized lanes and sidewalks, motor vehicles pass in the middle of the road, and non-motorized vehicles and pedestrians pass on both sides of the road.

    Article 41 Other specific provisions on road traffic shall be prescribed by ***.

  9. Anonymous users2024-01-29

    A big left turn and a small right turn mean that when the vehicle is turning, the left turn should be passed by the left turn at the center point of the intersection, and the right turn will pass through the small turn.

    According to Article 51 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China, motor vehicles passing through intersections controlled by traffic lights shall pass in accordance with the following provisions:

    1. At the intersection with a guide lane, drive into the guide lane according to the required direction of travel;

    2. If you are ready to enter the roundabout, let the motor vehicles already in the intersection go first;

    3. When turning left, keep to the left of the center point of the intersection. Turn on the turn signal when turning, and turn on the low beam when driving at night;

    4. When encountering a release signal, pass in turn;

    5. When encountering a stop signal, stop outside the stop line in turn. If there is no stop line, stop outside the intersection;

    6. When turning to the right and encountering the car in front of the same lane is waiting for the release signal, stop and wait in turn;

    7. At intersections without directional signals, turning motor vehicles give way to vehicles and pedestrians going straight. A right-turning vehicle traveling in the opposite direction gives way to a left-turning vehicle.

  10. Anonymous users2024-01-28

    Left turn we occupy the left lane, the line of sight is relatively wide, can see the opposite vehicle clearly, but in order to let the other party better grasp the vehicle, we try to turn bigger, to give the other party a reasonable turning position, convenient for others and convenient for themselves.

    In the same way, when turning right, our vision is relatively narrow, and we can't see the situation of the opposite vehicle occupying the road, so it is best to stick into our own right-turn route, keep a low speed to grasp the direction of the vehicle, and give way to the opposite vehicle to make way for a reasonable driving road, so as to avoid collision due to poor turning sight as much as possible!

    As the saying goes: it is convenient to be with people, and it is also convenient to be with others! Answer supplement This is also the instructor's teaching in the process of learning to drive, and it feels very reasonable to think carefully after listening!

  11. Anonymous users2024-01-27

    The reason for turning left and turning a big turn: it does not affect the vehicle to go straight; The view is good, and it is easy to see once a pedestrian crosses the road. Reasons for turning right and making small turns:

    When turning right, the turning radius is too large and will affect the vehicle driving in a straight line, so when turning right, the radius is small to directly and quickly turn into the rightmost lane, if the radius is too large, it is likely to turn into the middle lane or the leftmost lane, which will affect the normal right-turning or straight-going vehicles.

    When a motor vehicle passes through an intersection without a direction signal or an intersection without traffic signal control and without a traffic police command, the turning motor vehicle gives way to the vehicle or pedestrian going straight. A right-turning vehicle traveling in the opposite direction gives way to a left-turning vehicle. Therefore, if traffic is also permitted, left-turning vehicles should give way to vehicles going straight.

    In addition to making a small turn, these two principles should also be followed when turning right:

    1. When a traffic accident occurs between a right-turning vehicle and a straight-going vehicle, the right-turning vehicle is generally fully responsible.

    2. Pay attention to the blind spot When the vehicle turns right, if the vehicle in the rearview mirror suddenly disappears, then it is likely that the rear car enters the blind spot of the viewing angle, and the owner needs to pay more attention.

  12. Anonymous users2024-01-26

    Turn left and turn big turns

    When turning, the rule we follow is to turn left and big and right to make a small turn, which means that to turn left you need to turn a large arc, and to turn right you need to turn a small arc. Of course, turning left to big bends, turning right to small turns, this specific operation also needs to be operated according to the road section, at the intersection, U-bend section, and road section with safety islands, the operation of turning is different.

    If you are driving a front-wheel drive vehicle, this kind of front-wheel drive is generally understeered, and this situation requires a large circle to move the car in the specified direction. This kind of vehicle must reduce its speed appropriately when turning.

    Eighty percent of today's family cars are front-wheel drive, and one of the major features of this model is understeer. The so-called understeer is to play a lot of direction to make the car move in the specified direction, and even if the direction kills the car, it will not go in the desired direction. Therefore, when turning, we need to reduce our speed appropriately, and at the same time, we must also remember to turn signals in advance.

    Precautions for driving:

    1. Check the area around the car before driving. See if there are people around, there is no shelter, do it in your heart, and only after confirming that it is correct, can you get on the car and do it well.

    2. Wear a seat belt. This is an important step, and it is important to fasten your seatbelt before starting the car.

    3. Pay attention after starting the car. During driving the car, you must pay attention, try not to chat with someone in the car, do not answer the call**, and avoid accidents.

    4. Keep a good distance between cars, don't get too close to the car, there is a lot of traffic in the urban area, and it is very important to have a safe car distance to avoid a rear-end collision between two cars.

    5. Don't drive tired. Fatigue driving will slow down our reactions, increase the operation errors of motor vehicles, and even cause short sleep, and the consequences are unimaginable.

    6. Don't drink and drive. Self-control after drinking is reduced, eyesight will also be reduced, and the body balance will be poor, so do not drink and drive, the risk factor is too high.

    7. Don't speed. Don't drive a motor vehicle over the speed limit, some people feel that they have high driving skills, it doesn't matter if they drive faster, often such ideas cause traffic accidents, speeding is easy to cause collisions and rollover and other traffic accidents.

  13. Anonymous users2024-01-25

    A left turn is a big turn, and a right turn is a small turn.

    According to domestic traffic rules, cars should drive on the right, so the driving track should be shown by the green arrow in the picture.

    Correspondingly, cars turning left and right should follow the red arrows.

    This is a left turn to turn in a big circle, and a right turn to a small circle. The reverse is retrograde.

  14. Anonymous users2024-01-24

    A left turn is a big turn, and a right turn is a small turn, which is the same as Shanghainese.

  15. Anonymous users2024-01-23

    A left turn is generally referred to as a major turn.

  16. Anonymous users2024-01-22

    The meaning of a left turn is the size of the turning radius.

    A left turn means that when you turn left at an intersection, you should have a larger turning radius, keep driving forward, and then start turning left when you reach the center of the intersection. Celebrity.

    The right turn is to not affect the passage of vehicles going straight and reduce the probability of accidents. After turning right, turn to the rightmost lane, and change lanes after turning if you need to change lanes.

    When driving at an intersection and the vehicle needs to make a left turn, it must first pass through a zebra crossing, and then go through a very large turn before entering the rightmost lane of the road. A right turn is the same road, and it is recommended that you make a small turn before moving into the rightmost lane of the road.

    Precautions for car turning

    When the vehicle is making a left turn, it must first cross the zebra crossing before turning the steering wheel. During the direction, you must break the steering wheel and stay in the lane where you can enter the leftmost position. In this way, the vehicle does not cross many lanes during turning, so the chance of collision with other vehicles is reduced, and there is no need to worry about affecting the driving of other vehicles.

    The main reason for turning a big turn is that if you give the steering wheel direction in advance, whether it is leaving the road before the turn or entering the road after the turn, the probability of the rear wheel pressing into the double yellow line will be much higher. In addition, when the steering wheel turns into a left-turning road, the car has basically reached the right state, which is more convenient to choose the lane.

Related questions
23 answers2024-03-11

What to do if the EFI Dayang bent beam motorcycle does not have a foot pedal, this kind of motorcycle without starting lever design, it is still guaranteed in terms of starting, as long as the motorcycle is maintained normally, the oil, filter element, spark plug are replaced on time, the oil circuit is regularly maintained, the battery is charged regularly and the battery must be replaced when it expires, so that the normal start can be basically guaranteed, in case of failure can not ignite, you can contact the after-sales service during the warranty period, and you can only implement the motorcycle repair shop if you are out of insurance.