Where should the temperature control valve be placed, and the flow rate is the maximum

Shandong 20 degrees energy-saving technical service **** will wholeheartedly answer for you:

The temperature control valve is marked with * 1 2 3 4 5 max, * stands for antifreeze (8 degrees Celsius) and 12345 max represents the temperature increase sequentially (max 30 degrees Celsius). Therefore, max is the maximum flow rate and the set temperature is also the highest.

I hope it can help you, if you help, please choose the satisfactory answer, thank you!

1. The composition and working principle of the self-operated heating temperature control valve.

The self-operated heater temperature control valve is mainly composed of valve body, valve core, valve seat, adjusting sleeve (adjusting screw), return spring, etc. When the hot water enters the valve body, the temperature sensing element in the valve core is used to automatically control the opening of the valve, close or automatically adjust the opening of the valve, so as to achieve the purpose of automatically controlling the temperature of the return water discharge.

The self-operated heater temperature control valve is installed on the return branch pipe of each group of radiators in the heating system, and when the return water temperature in the radiator reaches the design return water temperature, the valve will be automatically opened and the return water will pass through. When the return water temperature of the radiator is higher than the design return water temperature, the valve opening will automatically become smaller and close directly. In this way, even if the balance of each loop of the heating system is out of balance due to design or construction, it can be automatically balanced by relying on the control function of the self-operated temperature control flow control valve.

2. Manual adjustment of self-operated heating temperature control valve.

The self-operated heater temperature control valve is equipped with an adjustment sleeve (adjusting screw) to adjust the temperature of the discharge and return water, and the radiator temperature control valve has 5 scales, 0-5, which can be adjusted appropriately according to your own comfort. Clockwise rotation adjustment, the drainage temperature is reduced, and the indoor temperature is reduced. On the contrary, the drainage temperature will increase, and the indoor temperature will rise.

The temperature control valve is rotary, and it is marked with *12345, which in turn indicates that the flow rate is getting larger and larger, that is to say, when it rotates to 5, the flow rate is maximum, and when it is *, it means antifreeze. My home is Shandong 20 degrees energy-saving technical service **** self-developed heating temperature control valve, the quality and service are very good, hehe, I hope to help you.

Twist the head counterclockwise to the head "that is, 5".

Generally speaking, the temperature control valve has 0-5 scales, and when it is opened, it should be screwed clockwise to the maximum, which should be on the 5th gear, the larger the gear, the greater the water flow, and the best heating effect.

The radiator temperature control valve is actually called the "self-powered heating temperature control valve", which is used to adjust the size of the water flow, the larger the water flow, the better the heating effect, and it is good to adjust it according to the actual indoor situation. After the temperature goes up, it can be adjusted slightly according to the actual situation to meet the needs of use.

1. First of all, enter the room where the temperature needs to be adjusted and find the location of the radiator.

2. At the top water inlet of the radiator, you can see a white object similar to a light bulb, which is a switch to control the temperature.

3. After finding it, you can see that the number is marked on it, adjust the temperature according to your own needs, "5" indicates that the heating water has turned to the maximum, and the heating will be hotter.

4. When adjusting, you can also touch the radiator with your hands to feel whether the temperature is appropriate. Because the water in the radiator needs to wait for a while to get better, you can adjust it later to contact the temperature.

5. If you feel that the temperature at home is too high, you don't want the heating to be so hot. It can also be reversed by means of a switch. When you adjust the snowflake sign, it means that the radiator is turned off and does not heat up.

This kind of temperature control valve is a valve, the valve is all open, that is, the maximum temperature, that is, counterclockwise rotation, to the maximum is the maximum flow (maximum temperature), really to help you look forward to adopting,

Hello dear! It's a pleasure to serve you. Electric heater valves all have a setting switch.

He will be twisted at 90 degrees. Screw it all over, it is the largest, put a little bit, it is relatively small Qingliang. Adjustment skills of heating valve 1. Confirm that the main valve of the pipe is open.

2. Close all the valves in the home and debug it from the time you enter the house. 3. When the upper and lower valves are closed, open the air valve to drain the gas. 4. Slowly unscrew the water inlet valve, the water flow should be slow, and you can hear the sound of the water flow.

The water flow is too fast, the water surface rises unevenly, and the gas is not clean. Wait until the air valve comes out of the water, and turn off the gas valve. Unscrew the inlet valve slightly to maintain the pressure of the inlet water.

5. Repeat the previous step until all are completed. 6. From the beginning of entering the house, slightly unscrew a trace of the return valve, and hear the flow of water. The return valve must be opened smaller, smaller than the inlet valve.

Come one by one, and open the next one after stabilization. I hope mine can help you, please help me like it, I wish you a happy life.

Hello! Dear, I am glad to answer for you, when the radiator temperature control valve is opened parallel to the pipe, it is the maximum state. In the vertical single-pipe downstream system, the radiator temperature control valve cannot be installed because all the water of the previous group of radiators flows through the next group of radiators, and each group of radiators is located on different floors.

Consideration could be given to converting the system to a vertical single-pipe spanning system, so that a thermostatic valve or a manual regulator with better regulation performance can be installed before each radiator with the first set of radiators. First find out the specific installation location of the temperature control valve, usually there are 0 to 5 scales on the temperature control valve, and when it is opened, it can be said that the number can be talked about clockwise to the maximum, that is, 5 gears are defeated, because the larger the gear, the larger the water flow, and the better the heating effect.

1. Adjust the temperature: The flow control valve can control the amount of hot water entering the heating pipeline, the more hot water flow, the higher the temperature, and the lower the flow rate, so as to control the temperature.

2. Sub-room heating: When a room is uninhabited for a long time, the user can close the regulating valve of the radiator in the room to achieve the effect of sub-room heating, which is more energy-saving.

3. Balance water pressure: The heating control valve pays attention to the flow of the overall heating system, so as to balance the water pressure and provide a more comfortable living environment.

4. Energy saving: The temperature can be set by the regulating valve according to the requirements of room temperature. Ensure that the room temperature of the room is constant, and avoid the problem of unbalanced water volume in the pipes and uneven room temperature in the upper and lower floors of the single-pipe system.

The heating flow meter (heat meter) cannot be adjusted and is only used to calculate the heat. The heating flow meter is installed on the fluid inlet or return pipe, the flow meter sends a pulse signal proportional to the flow rate, a pair of temperature sensors give an analog signal indicating the temperature, and the accumulator collects the signal from the flow and temperature concession sensors, and uses the calculation formula to calculate the heat obtained by the heat exchange system. <

The heating flow meter (also known as the heat meter) cannot be adjusted and is only used to calculate the heat. The heating flowmeter is installed on the fluid inlet or return pipe, the flowmeter sends a pulse signal proportional to the flow rate, a pair of temperature sensors give an analog signal indicating the temperature, and the integrator collects the signal from the flow and temperature sensors, and uses the calculation formula to calculate the heat obtained by the heat exchange system.

The heating heat meter uses a Wiegand flow meter, and the temperature signal measured by the temperature sensor and the flow signal measured by the flow sensor are finally sent to the microprocessor, and its software completes the multiplication, subtraction, and accumulation operations. Finally, the results are displayed in the window of the meter with the words of the digital hall, and can even be further sent to the bank through the network, and the heating fee is automatically deducted from the account, which is both worry-free and trouble-free.