What should I pay attention to when driving a new car? What are the precautions for a new car on the

What are the precautions for a new car?

The new car on the road has the following precautions: 1, control the speed: when the new car is on the road at the beginning, you need to control the speed, in the run-in period of the car, the engine speed should be controlled at 2000-4000 rpm, the engine speed is too high, easy to cause abnormal wear, the number of hidden can not let the engine get full run-in, the later may increase the cost of car maintenance;

2. Pay attention to the speed change: the new car needs a reasonable run-in, try not to maintain a constant speed for a long time when driving, and the engine can be run in through different gears when driving a manual transmission car.

3. Tire running-in: new car tires also need to be run-in to have a better use effect, reasonable run-in tires can extend the service life of car tires, the new car in the initial 100 kilometers, at a moderate speed, to avoid the phenomenon of emergency braking during driving, emergency braking not only makes the braking system in the run-in impact, but also increases the impact load of the chassis and engine; Potato Hall.

4. All-round inspection: when the new car is on the road, it is necessary to carry out a comprehensive inspection of the car, the old driver with rich driving experience can judge the use of the car through the sound of the engine, and can also determine the use of the car through the display of the car dashboard.

Millions of car purchase subsidies.

The correct way to run a new car is to drive at as low a speed as possible. Generally, the maximum speed is within 50-100 km/h. Do not allow the engine to idle for too long before starting.

Emergency braking should be avoided within 300 kilometers of the initial driving period; Within 1000 km, the throttle should be fully open. Precautions during car approach are as follows: Not suitable for high-speed driving:

There is a speed regulation at the beginning of the new car, which is generally within 50-100km h. It is generally stipulated that in the first 1000 kilometers, when the throttle is fully open, the car defect speed can not exceed 80% of the maximum speed, and it is required to observe the engine tachometer and speedometer in use, so that the engine speed and speed work at medium speed. Not suitable for full load operation:

A new car driving with a full load can damage machine parts. Don't run long distances, either, as this will increase the continuous working time of the engine and aggravate the wear and tear of parts. Emergency braking is not suitable:

Emergency braking will not only impact the braking system during the run-in, but also increase the shock load on the chassis and engine, so do not use it for the first 1000 km. In case of emergency, try to press the clutch pedal first to reduce the impact on the engine. When driving, change gears in time.

Do not drive in high speed and low gear or drive in low speed and high gear, and do not use one gear for a long time.

When a new car is on the road, you must pay attention to these aspects: control the speed, pay attention to the speed change of the car, pay attention to the run-in of the tires, check in all directions before driving, maintain it when it is due, never kill the steering wheel, and never refuel until the fuel tank bottoms out.

1.Control the speed of the vehicle: When a new car starts on the road, you need to control the speed of the vehicle.

In the running-in stage, the engine speed should be controlled at 2000-4000 rpm. If the engine speed is too high, it is easy to cause abnormal wear, and the engine cannot be completely run-in, which may increase the maintenance cost in the later stage.

2.Pay attention to the shifting: new cars need to be reasonably run-in. Try not to maintain a constant speed for long periods of time while driving. When driving a manual transmission car, you can get the engine running in different gears. If it is an automatic car, it needs to drive at different speeds in the engine.

3.Tire running-in: New car tires also need to be run-in to have better service results.

Reasonable run-in tires can prolong the service life of car wheel keichi tires. When a new car is driven for the first 100 kilometers, emergency braking needs to be avoided during driving. Emergency braking not only shocks the braking system during break-in, but also increases the shock load on the chassis and engine.

4.Full inspection: When a new car is on the road, a full inspection of the car is required.

Experienced drivers can judge the use of the car by the sound of the engine, and can also judge the use of the car by the display of the car dashboard. If there is a red warning light, you must find a parking belt to check the flame-out.

Millions of car purchase subsidies.

Things to pay attention to when a new car is on the road:

1. Adjust the seat pitch and the viewing angle of the rearview mirror.

2. After the computer self-test is completed, after all the instruments are normal, start the vehicle 3. Don't forget to release the handbrake when starting.

5. Turn signals before overtaking and merging, and look at the rearview mirror.

6. Think about how to go in advance before getting off the intersection, look at the road signs frequently, and don't miss 7. Use double flashing warning lights in case of emergency.

8. Don't forget to pull up your hand to brake when parking.

Hope this helps,!!

The most noteworthy problem is the running-in use, which plays a key role in extending the service life of the engine. First of all, do not warm up the engine with idle speed. The current EFI engine has a temperature compensation control system, which can meet the normal driving of the vehicle in the cold state.

If the EFI engine is preheated for a long time, it will only increase fuel consumption invisibly. Secondly, do not drive the engine at high rpm while driving. There are speed regulations for the initial driving stage of new cars, which are generally within 60-150 km/h.

Generally speaking, the engine speed during the break-in period should be strictly between 2000-4000 rpm. Third, it is necessary to avoid overloading the engine. The new car is easy to cause damage to the parts when it runs at full load, so it cannot exceed 75%-80% of the rated load during the running-in period.

These aspects are all issues that need to be paid attention to for novices on the road. Fourth, do not easily replace the original car engine oil during the run-in period, and always check whether the oil, coolant, battery, and electrolyte are sufficient, and must be replenished in time if it is found to be missing.

1. The "internship" sign must be affixed to the back of the car.

2. Be stable in your mentality.

3. Try to take the most familiar route first, and cultivate a sense of road and direction.

It doesn't matter if the new car is on the road, remember to tell me which city you are in when you are on the road, and I try not to go there.

Do not exceed 100 km h and 3,000 rpm of the engine.

The new car has just been brought back, in fact, all parts are still in the run-in period, so don't be too fast in terms of driving speed, it is best not to exceed 100km h. Because the division of labor and cooperation between the parts is still occlusive, it has not yet reached the optimal state, and if the speed is too fast, it will cause damage to the parts and shorten the life of the car. Driving in urban areas is kept at 50 to 80 km/h, and at high speeds is less than 100 km/h.

And the rotational speed should not be higher than 3000.

When a new car is on the road, it should be noted that: 1. Control the speed, and the engine speed should be controlled at 2000 to 4000 rpm per minute; 2. When driving, try not to mess with spring or maintain a constant speed for a long time, run in the engine through different gears when manually transmitting the car, and run in the engine through different speeds for automatic transmission cars; 3. When a new car is on the road, it is necessary to conduct a comprehensive inspection of the car, which can be through the sound of the engine or the display of the car dashboard; 4. Reasonable run-in tires can extend the service life of car tires, and the new car will drive at a moderate speed at the beginning of 100 kilometers to avoid emergency braking during driving.

1. It is very important to warm up the new car at the start, especially in winter, the temperature of the engine that has just started is low, and the lubricating oil in each part is not enough. There are the following precautions for the departure of a new car. 1. Adjust the speed: When the new car starts, the speed must be adjusted.

In a car during grinding, the engine speed needs to be adjusted to 2,000-4,000 rpm. If the engine speed is too high and too late, it is easy to cause abnormal wear and tear, and the engine cannot be fully ground. The cost of car maintenance may increase in the later stage.

2. Please pay attention to the speed change: the new car needs a reasonable run-in. Try not to maintain a certain speed for a long time while driving.

When driving in manual transmission, the engine can be accustomed to different gears. In the case of automatic shifting vehicles, the engine needs to be adapted at different speeds. 3. Run-in tires:

New car tires also need to be run-in to achieve better results. Reasonable run-in tires can extend the service life of car tires. The first 100 kilometers of the new car are driven at a moderate speed to prevent the phenomenon of emergency braking while driving.

Emergency braking not only causes an impact on the braking system during the run-in, but also increases the shock load on the chassis and engine; 4. All-round inspection: When a new car departs, it is necessary to conduct all-round inspection of the car. Veteran drivers with rich driving experience can judge the use of the car by the sound of the engine, and can also determine the use of the car through the display of the car dashboard.

The red warning light is on, and you must find the parking strip for flame-out detection.