How can I dissolve the solidified cement?

If it is a small piece of cement, you can use a rag dipped in edible vinegar, and then wipe it repeatedly, if not, go to buy industrial vinegar, dilute it and wipe it again.

If the cement block on the wall is large, remove the cement block first, and then clean it with acidic substance.

Because the acidic substance has a relatively obvious corrosive effect on the cement, it can be used to dissolve the cement.

Cement: commonly known as ash.

Red hair mud, English mud, used in civil engineering.

The general term of cementing materials, according to the different cementing properties, can be divided into hydraulic cement and non-hydraulic cement, born in 1824, is one of the most important building materials in the world today. China calls cement Hongmao mud because cement was introduced from foreign countries, and foreigners are called Hongmao. There are many types of cement, which are divided into Portland cement according to its mineral composition.

Aluminate cement, sulfoaluminate cement, fluoroaluminate cement, ferroaluminate cement and less or no clinker cement, etc. According to its use and performance, it is divided into three categories: general cement, special cement and special cement.

Physical methods are not enough, only chemical methods can be used.

Acidic substances have a more obvious corrosive effect on cement, such as dilute hydrochloric acid, acetic acid (edible vinegar), you use a rag to dip the vinegar and then wipe it.

Go to the chemical store to sell some hydrochloric acid back, dilute it and process it. Remember to wear gloves.

Of course, if the cement block on the wall is very large, it is necessary to remove the cement block by physical method first, and then clean it with acidic substances.

Cement is a hydraulic material, once it begins to condense and harden when it encounters water, if you have just used it for 2 or 3 hours, you can use a metal hard object to slowly knock on the surface for a while and it will fall off, but the cement that has fallen down cannot be used because it has been condensed.

Cement is a hydraulic material, once the water begins to condense and harden, if you are just using 2 3 hours, you can use a metal hard object to slowly knock on the surface for a while will fall off, if the time is too long, you have to ask the decoration master to help you get it. But the cement that fell down is not usable because it has condensed.

Admixtures such as early strength agents and quick-setting agents.

Early strength agent: an admixture that improves the early strength of concrete and has no significant effect on the later strength.

The main function of the early strength agent is to accelerate the hydration rate of cement and promote the development of early strength of concrete. It not only has the function of early strength, but also has a certain function of water reduction and enhancement. Concrete early strength agent is one of the earliest admixture varieties used in the development history of admixtures.

So far, people have developed a variety of early-strength admixtures in addition to chloride and sulfate, such as nitrite, chromate, etc., as well as organic early-strength additives, such as triethanolamine, calcium formate, urea, etc.

Scope of application. 1. This product does not contain chloride ions, has no rust effect on steel bars, and is suitable for all civil and industrial buildings and prestressed steel reinforced concrete components, mortar, etc.

2. The early strength agent is most suitable for construction under low temperature conditions in early winter and early spring.

3. This agent is used for Portland cement, and the enhancement and modification of slag cement is particularly significant.

According to the speed of hydration reaction and the main changes in physical and chemical chemistry, the coagulation and hardening of cement can be divided into initial reaction stage 5 10 minutes incubation period 1 hour coagulation period 6 hours hardening period 6 hours to several years 1. Temperature The initial and final setting of cement will be affected by the air temperature, and the lower the temperature, the longer the solidification time is required, so in the case of low temperature, warm measures should be taken to ensure the quality of concrete. In hot weather, the initial setting of the cement is not allowed to withstand too much sun, to spread a sack or absorbent things on top, and scatter water on it. 2. False coagulation and fast setting The false setting and fast setting of cement are commonly known as the early solidification of cement.

False coagulation means that after the cement is mixed with water, the material will show the characteristics of coagulation within a few minutes, and then, after vigorous stirring, the cement slurry will return to plasticity and achieve normal coagulation. This abnormal early curing, i.e., premature hardening, has no adverse effect on the strength of the cement slurry, but it does affect the construction. The fast setting of cement is different from the false setting.

The heat released by false condensation is very small, while the heat released by fast condensation is very small; The remixing of the fast-setting cement slurry can no longer be restored.

The main coagulant compounds of Portland cement are alkali metal aluminates, carbonates, silicates and hydroxides. The common characteristic of these compounds is that they dissolve quickly in water and release strong alkaline hydroxides, which strongly promote the hydration of cement minerals, especially C3A and C3S.

Hello, I have seen your question and am sorting out the answer, please wait a while

Summary. Cement is a powdered hydraulic inorganic cementitious material, which can be hardened in air or water, and can be firmly cemented together with sand, stone and other materials after adding water and stirring, which can be hardened in air or water. The mixture of early lime and pozzolana was similar to that of modern lime pozzolana cement, and the concrete made from cemented crushed stone was not only strong when hardened, but also resistant to the erosion of fresh or salt water.

Cement is a powdered hydraulic inorganic cementitious material, which can be hardened in air or water, and can be firmly cemented together with sand, stone and other materials after adding water and stirring, which can be hardened in air or water. The mixture of early lime and volcanic ash is very similar to that of modern lime pozzolan cement, and the concrete made from cemented crushed stone is not only strong when hardened, but also resistant to the erosion and seepage of fresh water or salt water.

Add something to solidify a little faster.

Early strength agent, quick-setting agent.

Can it be used in water? There is no effect on the water.

Can be used in water.

Hello, there is nothing that can quickly dissolve solidified cement in a short time. If it is necessary to dissolve the solidified cement, a cement dissolving agent can be used, but for a long time. Cement dissolving agent is a new type of soaking type to dissolve industrial and pipeline cement dredging products, mainly through long-term Yuyeyan repeated use of product dilution solution to soak the dredging area to achieve the effect of dissolving cement.

How to use: Blender: 50 grams can be dissolved in 100ml of hot water, and the solution should be used while hot.

Complete blockage: Absorb and remove the stagnant water in the sewer, pour in the mixed solution, and the amount of liquid should be completely soaked in the blockage. After every two days, first treat it with a leather puff (impact the surface of the blockage), adsorb and remove the stagnant water in the sewer again, and pour in the dissolved solution.

Repeat several times until the drainage is smooth. Partial blockage: refers to (urine alkali ridge or scattered cement blocks blocked, there is no water in the pipeline, but the drainage is not smooth), pour 50-100 ml of solution every 1 hour (due to the continuous loss of solution, a small amount of many times is appropriate), and the process of pouring liquid can be handled with the help of a leather puffer.

There is nothing that can quickly dissolve the solidified cement of the shed section in a short period of time. If it is necessary to dissolve the solidified cement right, a cement dissolving agent can be used, but for a long time. Cement dissolving agent is a new type of soaking type to dissolve industrial and pipeline cement dredging products, mainly by repeatedly using the product dilution solution for a long time to soak the dredging area to achieve the effect of dissolving cement.

Cement is a powdered hydraulic inorganic cementitious material. After adding water and stirring, it forms a slurry, which can be hardened in air or water, and can firmly cement sand, stone and other materials together.

The mixture of early lime and pozzolana is similar to modern lime ash cement, and the concrete made from cemented crushed stone is not only strong after hardening, but also resistant to erosion by fresh water or salt water. For a long time, as an important cementitious material, it has been widely used in civil construction, water conservancy, national defense and other projects.