How to set up the dash cam correctly?

A dash cam is an instrument that records the image and sound of the vehicle while driving. After installing the dash cam, it can record the best images and sounds of the whole process of driving, which can provide evidence for traffic accidents.

If it's not set up, it's like hanging a brick.

If you want to protect the safety of the car after parking, it is important to set up a dash cam.

How to set up the dash cam.

1. You can use the voice system to open and say "Hello, Vision!" After activating the voice system system session, issue the command "Turn on the dash cam".

2. Click the photo emergency video button on the left side of the steering wheel to take photos and emergency videos.

3. Dash cam on: You can set the dash cam in the smart car host 4. You can choose whether to start recording and whether to turn on recording.

Automobile tachograph, commonly known as automobile black box, is a digital electronic recording device that records and stores vehicle speed, time, mileage and other state information about vehicle driving, and can realize data output through interface.

The car tachograph records and stores the vehicle speed, time, mileage and other state information about the vehicle driving and realizes the data output through the interface. Abbreviated as recorder, commonly known as car black box. It provides important data and information for road traffic safety accident analysis.

If it's not set up, it's like hanging a brick.

1. Plug in the memory card and press and hold the power button to turn on and off.

2. Set the recording parameters, it is recommended to choose 2 minutes as a clip.

3. Set up motion detection, it is not recommended to turn on during driving, due to its sensitivity and algorithm problems, it will produce a large number of frame loss, if the stool key car can be turned on for a long time, in order to reduce power consumption and prolong battery life.

4. Set up gravity induction, jujube scattering is generally set to medium or high to avoid detection during sudden braking, or directly shut down, and then manually store in the event of a collision.

1. Be sure to read the manual before installing the dash camHave a clear grasp of the buttons and each function above

Choose the installation location so that it will not obstruct the driver's vision at allThe best position is the position of the front windshield against the **, which is the position of the rearview mirror.

Pay attention to the working area of the wiperOtherwise, in rainy and snowy days, the glass leaks outside the car and the glass is dirty, but the wiper cannot be scraped, which may cause the shooting quality to be unclear.

Adjust the frame range of the dashcam, so that the hood of the car appears below the frame, but not more than a third of the way.

The A-pillars on both sides of the car should be located below the two sides of the frame.

Different dash cam products have different appearances, but their basic components are:

1) Host: including microprocessor, data memory, real-time clock, display, lens module, operation key, printer, data communication door and other devices. If the host body does not contain a monitor or printer, there should be a corresponding data display and a clear printout interface.

2) Vehicle speed sensor.

3) Data analysis software.

The above content reference: Encyclopedia - Dash Cam.