What are the common types of car lights, what are their functions, and what is the relationship betw

What are the characteristics of the tail lights of Zhengzhou Nissan's pickup truck? What role does it play?

Lights are made up of the following parts:

1. Indicator width lights, also known as running lights, are lights that transmit vehicle width information in low visibility conditions, and can be turned on by simply turning the combination switch to a gear, at this time the instrument lights in the car are all lit, and the front and rear of the car will also light up two small lights, the brightness of these two lights is not large, mainly so that the four corners of the body can be seen. Generally, this light should be turned on when it is getting dark, raining, or in a shady place such as an underground parking lot.

2. The most basic purpose of the turn signal is to give signals to other vehicles and passers-by when the vehicle turns, so as to remind others to pay attention. When the turn signals on both sides are turned on at the same time, it plays the role of warning and indicating width.

3. The headlights, composed of two parts, the low beam and the high beam, are the lights used for lighting, and the lights of the low beams are fan-shaped beams, which can illuminate the near road surface in front of the front of the car in a large area, and the lights are not dazzling, which is suitable for use when the road and the vehicle meet with good lighting. The light of the high beam is a direct beam, which can illuminate the long-distance road surface in front of the front of the car, and the light is dazzling, which is suitable for use at night when there are no street lights, poor lighting or low visibility such as fog, rain, snow, and dust. Generally, it is a set of switches with the width indicator light, and the headlight can be turned on by turning the combination switch to the second gear.

4. Fog lights, as the name suggests, are light signals used in foggy weather, and fog lights have stronger penetration in fog, so it is easier for vehicles or pedestrians to notice early. The fog lights are divided into two parts, the front lights are used to illuminate the road surface in front of the front of the car at a close distance of nearly 180 degrees, and the rear lights are used to remind the rear vehicles to pay attention to the distance.

5. The reversing light, the light color is white, controlled by the transmission, and lit when the transmission is in the reverse position, on the one hand, it can illuminate the road surface and obstacles at the rear of the car, reduce the blind spot when reversing, and on the other hand, it is also a reminder to pedestrians and oncoming cars at the rear of the car.

6. Brake light, the brake light will automatically light up when braking, which plays the role of reminding the rear vehicle.

There are many types of lights, including daytime running lights, brake lights, fog lights, reversing lights, license plate lights, turn signals, high beams, etc. What are they used for? Let's introduce it today.

Turn signals: Turn on alternately when cornering to alert the vehicle and give passers-by a cue.

High beams: The light is dark at night, and the high beams are for a better view, but don't turn on the high beams! The consequences are too bad and too severe.

Fog Lights: Improves visibility when driving in foggy weather. If you turn on the rear fog lights on a non-foggy day, it will be very harsh to the rear driver.

Daytime running lights: Lights used during the day, with high brightness, can warn pedestrians and other vehicles.

Brake light: Lights up when the brakes are applied to prevent rear-end collisions.

Licence Lights: Lights that illuminate licence plates, which are mainly turned on at night or in bad weather.

The main lights and specific functions of the car are as follows.

First, the headlights

The front lamp is a very important lighting device, its function is to provide light for the road ahead when driving at night, to ensure the safety of driving, at the same time, it can also achieve night overtaking through the alternating change of high beam and low beam, and avoid dazzling the opposing driver when meeting in the opposite direction. Nowadays, the significance of car headlights is far more than **, and it also plays an important role in car design.

Now the car headlight technology, has been constantly improving, from the most basic halogen headlights, to now, xenon headlights, LED headlights, have been widely used, and even some high-end cars, are equipped with laser headlights, its radiation range is getting wider and wider.

Second, the turn indicator

Cars usually have 4 to 6 turn signals in the front, rear, or side, usually a 20w yellow light cluster, which is used for the car's steering. The function of the turn indicator is to prompt the front and rear vehicles, pedestrians themselves to turn in what direction, to give the other party a prediction, can greatly reduce the probability of accidents, turn indicators are very important in the process of driving, must be checked regularly, to ensure that it can work normally.

3. Fog lights

The light of the fog lamp is yellow, because the wavelength of yellow is very penetrating, so when driving in fog, snow and rain, it is often matched with the headlight. Usually, the fog lamps have a power of 35 W and are located at the bottom and tail of the front bumper, two in front and one in the rear, but at the moment some low-spec cars have eliminated them.

Some car owners like to change the fog lights to other colors, which is very unwise, because the fog lights are not decoration, their greater role is to ensure safe driving, only yellow fog lights are the most suitable color.

Fourth, brake lights

Usually, the brake light is installed at the rear of the car, which is mainly red, and when the brake is braked, it will emit a red bright light in order to warn the car behind and remind the vehicle behind to slow down and avoid rear-end collision.

Including high beams, low beams, marker lights, reverse lights, brake lights, turn signals, when driving a car, you must understand the decoration of these lights, but also pay attention to the lighting of the lights. It can ensure the safety of the car, and can also play the role of prompting, with the role of warning, and can also illuminate the situation of the road, and can know the width of the vehicle.

Ambient lights, lights, high beams, low beams, front and rear fog lights, daytime running lights. Ambient lights are some light strip settings of the car, high beams are used to illuminate, distant road low beams are used to illuminate low beam roads, shopping lights are used in foggy weather, and driving lights can be used in the car.

The main lights of the car are high beam and low beam; At night, vehicles should be switched to low beams at a distance of 150 meters from oncoming vehicles in the opposite direction, and low beams should be used when meeting cars on narrow roads, narrow bridges and non-motorized vehicles; Otherwise, use high beams.

The car is divided into front lights, rear lights, turn signals, license plate lights, etc.

The combination headlamp is located at the front of the car, and it mainly plays the role of lighting and signaling. The light emitted by the headlamps illuminates the road in front of the vehicle, allowing the driver to drive safely in the dark.

According to the light source, the combined headlamp can be divided into: tungsten halogen lamp, xenon lamp, and according to the function, it can be divided into low beam, high beam, front turn signal, front position light, and front fog lamp.

It is not mandatory by national regulations, and all models are basically equipped.

The combination tail light is in the rear of the car, which mainly plays the role of lighting and signaling. Rear lights generally consist of rear position lights, reversing lights, brake lights, rear fog lights, rear turn signals, and recovery reflectors.

A light fixture used to indicate a left or right turn to other road users. The regulatory requirement is amber.

License plate lightIt is mainly to illuminate the license plate, so that people can distinguish the license plate of the vehicle in the dark.

The common and commonly used lights on cars are:

The front of the vehicle has: headlights divided into low beam and high beams, turn signals, width indicators, fog lights.

The rear of the vehicle has: rear fog lights, reversing lights, license plate lights.

The main function of the headlights is that the car can illuminate the road in front of the car if the car is driving at night, so that the driver can clearly see the road conditions ahead. In general, it is enough to use low beams in the city, and you can turn on the high beams when driving at night on the highway. However, when the vehicle is in session, the high beams must be turned off and the low beams must be turned on.

<> turn signal is generally used to turn on when the vehicle is turning, giving a signal to other vehicles.

Width indicator lights, also known as small lights, are used to show the width and length of the vehicle at night.

The main function of fog lights is to turn on in foggy days, which can increase the lighting distance and brightness of the vehicle.

The reversing lights illuminate when the vehicle is in reverse gear, alerting pedestrians and other drivers that the vehicle is ready to reverse.

The license plate light is used to make it possible to see the license plate of the vehicle at night.

Hernia headlights, but the resolution of hernia headlights is not good, but it is very dazzling.

Headlights (high-beam, low-beam) lighting.

Fog lights (front and rear) Bad sight, strong penetration, wide indicator lights (small lights) Dark sky, wide warning Running lights, turn signals, turn warning warning lights (double flashing) Hazard warning.

Brake Lights Brake Warning Reversing Lights Reversing Warning, Reversing Lighting License Plate Lights Lighting License Plates.