What are the common ways to repair tires in automobiles?

Common car tire repair methods include external repair and internal repair, among which the internal is patched or mushroom nailed.

1. Plug the rubber strip to repair the tire. This is one of the quickest. It is also the most convenient way to repair a tire. It is directly pierced with a rubber strip using an iron nail. Plug the air leaks. The tires will be used normally for a short period of time. However, this method is only suitable for emergency use.

2 Cold repair tires. Cold repair tires are made thin with air leaks on the inside of the wheels. Then apply a special adhesive strip and squeeze it repeatedly. The collection brings the tires back into normal use. This method of repairing tires. Both strong and durable.

3 Mushroom nail repair. Mecho is made of special materials. Its properties are very similar to those of rubber.

Nail it into the leak on the inside of the tire. Then polish it. He fits perfectly with the tyres.

It is currently a very mainstream method of tire repair.

4 Tire heat repair. The preliminary steps of hot patching are actually similar to those of cold patching. The only gap is in the last step of hot patching, which requires the use of a heating device to melt the bead. Then fill in the holes in the tires and fix them.

Regarding the landlord's concern about "there are several ways to repair tires in the car", the following is my personal opinion:

Five. They are:

1. Cold patching: that is, the method of patching, which is a more mainstream method, is more widely used, and is similar to the method of repairing bicycle tires;

2. Plug the rubber strip to repair the tire: the operation is simple, there is no need to disassemble the tire, and there is no need to do the dynamic balance of Qiaoxiao, it can be done in a few minutes, which is cheap; auspicious belt.

3. Mushroom nail tire repair: also called rubber nail. The operation method of this tire repair is the same as the above cold repair method, the difference is that the material of the tire repair is different;

4. Fire compensation: the operation is complex, too time-consuming, and has high requirements for construction technology;

5. Tire repair and inflation machine: convenient and fast to repair tire holes, tire repair is fast, fast and practical.

1. Rubber strip repair method, rubber strip repair method is probably the most primitive repair method, a bit like seven wounds, and you have to poke the tire again before repairing. However, this method is a bit of a "minor injury does not go down the line of fire", at most it is an emergency remedy, because it is hard to repair from the outside, so it cannot ensure air tightness and firmness, and it is easy to get hurt after a long time, causing potential safety hazards.

2. The fire repair method is also known as the hot repair method, in fact, most of the open flames are not seen now, this tire repair method looks quite solid and reliable, but in fact the effect is not ideal. This method of tire repair is actually evolved from the first way of tire repair, and after heat treatment, the air tightness is better than the first one, and it is also stronger.

3. Patch repair method, to remove the tire from the hub, if the wound is small and not easy to find the clan or clan, but also to apply soap bubbles to locate. Once you have found the position, you can sand. This method of tire repair is simple and efficient, so many tire shops use this tire repair method.

At the same time, this kind of tire repair is very cheap, and it is linked to the tire repair sticker, and the tire repair sticker is more expensive, and the cottage is cheaper.

4. Mushroom repair method, this way of repairing tires has no obvious shortcomings, it can not only repair the damage on the inside of the tire, but also fill the damaged area of the tire carcass through the gluing of the root and the tire, so it is very firm and reliable. At present, this kind of tire repair ** is about 80-120 yuan, relatively speaking, the quality will be more guaranteed.

Summary. There are four ways to repair tires in automobiles, and the following is a detailed introduction:

1.Plugging rubber strip method: drill the hole about 6mm with drilling, and then plug the glued strip that has been coated with glue into the hole, this method can only be emergency, can not be used for a long time, and is easy to leak.

2.Patch tire repair: the performance is relatively stable and reliable, which needs to be completed in a professional tire repair shop, and this program is the most used in the market.

3.Hot repair: On the basis of patch tire repair, there is an additional heating step, which is generally used more by large trucks, and the tires of private cars are thinner, which is easy to cause damage to the tires due to improper heating.

4.Mushroom nails: In general, this method has the best air tightness and repair effect after repairing the tire, and the durability is also the strongest. But if the damage to the nail is not too large, then there is no need for mushroom nails, otherwise it will bring more damage.

What are the ways to repair automobile tires?

There are four ways to repair tires in automobiles, and the following are detailed introductions:1Plugging the strip method:

Drill the hole about 6mm with drilling, and then plug the glued strip into the hole, this method can only be emergency, can not be used for a long time, and is easy to leak. 2.Patch repair:

The performance is relatively stable and reliable, which needs to be completed in a professional tire repair shop, and this solution is the most used in the market. 3.Hot Supplement:

On the basis of patch tire repair, there is an additional heating step, which is generally used more by large trucks, and the tires of private cars are thinner, which is easy to cause damage to the tires due to improper heating. 4.Mushroom nails:

In general, this method has the best air tightness and repair effect after repairing the tire, and the durability is also the strongest. But if the damage to the nail is not too large, then there is no need for mushroom nails, otherwise it will bring more damage.

Michelin tires how to make up for suburban fruit good.

Patch tire repair: the performance is relatively stable and reliable, which needs to be completed in a professional tire repair shop, and this program is the most used in the market.

After the Michelin tires are repaired, there is a slow leak bubble.

In this case, if it is a leak in the place, then this may be that the glue is not dry and the patch is directly applied, so there may be a situation that cannot be sealed, which needs to be repaired again.

The first type: tire fire repair

People who often go out for self-driving may find that signs such as "fire repair tires" are often seen on the side of national highways and provincial highways. Fire repair is to remove the tire, and then attach the special raw film of the tomb belt to the hole that is pierced and then bake, so that the raw film and the tire are completely fitted together.

Advantages: Very durable, there is basically no need to worry about repeated air leaks.

Disadvantages: The technical requirements for the working hours of Zaohu are high, once the baking heat is not well controlled, the tires may be scorched, and car tires are generally not recommended.

The second type: strip tire repair

The method is to use a rotary drill to properly enlarge the hole and stuff the rubber strip coated with glue into the hole, which is the most common way to repair the tire, also known as the gun tire repair. This method of repairing tires does not need to disassemble the tire and rim, nor does it need to rebalance, so it is very convenient and can avoid damaging the steel wire of the tire opening part when dismantling.

Pros: It's quick and convenient, it only takes a few minutes, and there is no need to pry the tire off the underwire.

Disadvantages: It is not durable enough, and it is easy to cause slow gassing. In addition, because the awl or gun used when repairing the tire will cause secondary damage to the tire, it is easy to cause the steel cord to be exposed and rusty, thus causing the hidden danger of puncture. Therefore, it can usually only be used as a temporary remedy.

The third type: internal patch tire repair

The internal patch tire repair is commonly known as cold repair, first remove the flat tire, then put the tire on a special machine, detach the tire from the hub, and then polish the inner part of the tire, apply a special adhesive to the tire repair film, and finally use a tool to roll it until it is completely firmly bonded. This method is only suitable for relatively small tire damage.

Pros: Sturdy, but not once and for all. In addition, after repairing, the tire will generally be dynamically balanced, which is more conducive to the use of the tire.

Disadvantages: Not durable enough, after a period of flooding or high-speed driving, the repair is likely to leak again, and the tire repair time is relatively long.

Fourth: mushroom nail repair

This tire repair method is a more advanced method of repairing vacuum tires at present, and aircraft tires also adopt this repair method. The principle and procedure are the same as the internal patch patch, except that instead of film, a rubber nail that looks like a mushroom is attached to it. Thread the "root" of the mushroom nail through the damaged part from the inside of the tire, then cut off the excess part that leaked on the outside, and glue the "head" inside with super glue.

This method is aimed at nail holes and screw holes with a crown diameter of less than 6 mm.

Advantages: Because the damaged part is completely blocked, it avoids water from soaking into the damaged part and destroying the tire wire and cord layer, so it is a relatively safe and reliable tire repair method.

Cons: Higher level. The author once used this method to repair the tire because the screws were inserted into the tire, which cost 50 yuan, or ***.

<> "What are the common ways to repair tires.

Tires are like the feet of a vehicle, which are the parts that have the most contact with the road surface in daily use, and it is inevitable that they will encounter punctures. So what are the ways to repair the tire after the puncture, and which one should you choose? The more mainstream tire repair methods on the market include patch tire repair, hot repair, mushroom nails and sealant.

1. Patch tire repair.

The patch repair method is a widely used one, you need to go to a professional store to remove the tire from the hub, and choose different sizes of patches according to the size of the breakage, and the effect is good, and the safety factor is also very high. However, it is necessary to separate the tire hub during repair, which is more time-consuming, and dynamic balancing is required after the tire repair is completed.

After the repair of the tire is completed, from the surface of the tire, the original damage is still there, and the rain, cement and sand will also corrode the tire through the damage, and the steel wire layer and cord layer of the tire cannot be protected.

2. Hot supplement. Running long distances can be seen everywhere on the roadside of national highways and provincial highways "hot or fire repair" signs, which is more suitable for bias tires used for large goods. The procedure is similar to that of the patch method, in that the film is attached to the hole.

The difference is that there is an additional heating step, which requires a professional heat repair tool to heat and press the attached film.

The effect of heat supplement is actually not bad, but why is it not used much? Because compared with large trucks, private car tires are generally thin, improper heating, and excessive temperature will damage the tires.

3. Sealant.

It is very convenient to repair the tire with sealant, and the general owner can operate it by himself, but this method is temporary and can support until people find a tire repair shop to repair it. The composition of sealant is also varied, but there will be residual liquid in the tire after use, which will affect the dynamic balance of the tire to some extent, and will also have an impact on the second tire repair.

4. Mushroom nails.

In addition to the patch, rod-shaped rubber is added to protect the outside of the tire, and the same needs to be "picked" when repairing, and then the root of the mushroom nail passes through the punctured part from the inside of the tire. Then cut off the excess part of the luwood nucleus on the outside.

Finally, the "mushroom head" is glued to the inside with special glue, so that both the surface and the inside of the tire are completely sealed, which is better than the ordinary inner foil. Although mushroom nails are effective, they are not without limitations. The pierced wound must be perpendicular to the tread, and for some minor wounds, mushroom nail repair also requires the original wound to be enlarged, which is somewhat more than worth the loss.

The purpose of dynamic balancing is to eliminate the centrifugal force generated by the tire and rim in rotation, when the mass of an object is unevenly distributed relative to the axis, then centrifugal force will be generated when rotating, and the whole body will shake in serious cases.