Telecom broadband disconnection problem? The plug must be reinserted and unplugged each time to rega

Press the F5 function key.

Select Yes or OK.

Press Enter .

Press the F10 function key.

Select Yes or OK to save the default setting.

I'm also in this question, just do it as mentioned above, for your reference.

Hello. According to your description. If you have a network plier, the crystal head case. The details are as follows.

There are eight network cables, the order is white orange, orange, white green, blue, white blue, green, white brown, brown is the so-called network cable connection. You can also attach another crystal head according to the method. It's the same. Remember to cut the network cable so that the line will not work after the crystal head is done.

This problem is the problem of your broadband external wiring, and it is best to find someone from telecom to fix it, otherwise it will be broken after a period of time. I came back a few minutes later, and I was the same. Later, the external wiring was completely replaced.

If it is the ADSL of the ** line, it may be the cause of the line or the ADSL client, and if it is a direct network cable, it has something to do with the line and the switching equipment, and there are many reasons for this.

Reason: 1, the thread head is loose, the solution is to change the thread, there may be a problem with the small wire, the head is not replaced and the thread can be changed.

2. Your cat is broken, this often happens, the solution is to go to the telecom business hall to change it, we are free, for you to change the cat left over from the disassembly, it can be used normally, of course you can buy a new one, and it is not expensive.

3. It is unlikely that the reason for your router and the reason you misunderstand it as a cat, the router may be aging for a long time and will not automatically reconnect when the line is disconnected.

Connected, the crystal head I understand is the thin line of your home telecom broadband (compared to the normal network cable), and the thin line is replaced instead of the large line (I understand it is the network cable). Aren't you connected to the route, exclude this?

1. You can also ask questions online to indicate that the head is connected, the cat is new, and the disconnection indicates that there is probably a problem with the entire fine line of the home. The thread wrapped by the thin wire has a false connection caused by stretching.

2, this call customer service to let them change the thread.

The crystal head is damaged, and it is easy to loosen and drop the line when shaken, so you can replace it again.

Hello. Hopefully, the following will be helpful to you.

As long as both ends of the network cable are arranged in the same line order, it can be used normally. If you are sure that the network cable is the problem, you can replace the crystal head or purchase a new network cable to use. If the network cable is incorrect, the network connection will definitely be affected.

Create your own wonderful, Samsung's new flagship Note 3 is officially on sale, now log in to Anhui Telecom's online business hall to order and get 5 major gifts!

If you still have questions, please keep asking. Have a great day, thank you!

1. Check whether the driver version is suitable, the driver is not as new as possible, the suitable one is the best;

2. Try to change the rate mode of the network card, for example, it was 1G full duplex, try to adjust it to 100M full duplex.

Hello. Hopefully, the following will be helpful to you.

Please disconnect the router and use the computer to directly connect to the dial-up to see if there are still frequent drops.

1.If the connection is still dropped, please suggest that the customer service arrange a staff to test and repair it for you.

2.If the router returns to normal after removing it, it is a fault caused by using the router, please check whether the router settings are correct. If you are sure that there is no problem with the routing settings, please suggest that the customer service ask whether the port is bound to the MAC, if it is, you can request a temporary release, and then use the route to connect to the network, automatically bind the router MAC, and you can use it normally.

If you still have questions, please keep asking. Have a great day, thank you!

Hello: You can check the following situations:

It is recommended that you first perform a stand-alone test to see if the network speed is normal, if it is, it is a problem with your router.

It is possible that the computer is poisoned and the computer is running slowly, and you can check and kill the computer.

Whether any network interfaces are loose.

It may be caused by the instability of your network. You can test the internet speed, and if there is a problem, you can report it for repair. Speed measurement address.

In order to improve the accuracy of the speed test results, it is recommended that you close the ** applications related to the network before the speed test, such as Thunderbolt, flashget, eMule, ****, virus software virus database update, etc.

Hello, if you restrict the use of the router locally, this situation will occur, it is recommended that you call 10000 to understand clearly, if it is not a problem with the router, it may be a problem with the line connection, and you can also ask the staff to help you repair it.

This situation is a bit complicated, you have a route, it also depends on how many computers your route brings, how these computers occupy network resources, and whether there is a problem with your routing settings. First use your computer to dial the number to see if it is also disconnected, and if it is normal, then check the ones I talked about earlier.

It has nothing to do with installing a router. If the connection is always dropped, you should contact the telecom customer service.