What happens if I can ping the gateway, but I can t access the network?

Method 1: Disable the network card, stop it and use it!

Method 2: Run cmd and enter ipconfig all in the command prompt to find an item with a physical address, and write down the corresponding code.

Then, the Network Neighbor property Local Connection property Configuration Advanced dialog box to find the network address and put it before it doesn't exist"Dot"Remove it, and enter the code you just wrote down (no input"-") in link

Select 10M Full Duplex or 100M Full Duplex in the Speed option!

Obviously, the DNS is wrong, first connect to the network with a single machine, clear the custom IP, gateway, DNS, and then open the run dialog box, enter, you can see the DNS, and reconnect. The gateway fills in the router address, and the DNS fills in the test just now. If you can't resolve a domain name, you can't resolve DNS, and DNS is the name server.

In addition to ping the gateway, can you ping an address on the Internet? For example, you ping the DNS to see if it can get through (find a few more, in order to rule out the possibility of DNS problems. Example:

If it doesn't work, it means that there is a problem with DNS resolution, and if it still works, it means that your IE has a problem. If you have any questions, just add them, and good luck!

The tracert command should be used with caution, and sometimes the carrier's device may not be able to block this command, resulting in inaccurate traceroute.

The specific point is that the web page can't be opened, so can QQ be on? What gateway does it use to ping the route or direct connection to the extranet?

What is the reason why the computer can ping the IP and gateway, but cannot access the Internet?

There are several possible causes:1DNS Misconfiguration:

The computer can ping the IP address and gateway collapse, but it cannot access the Internet, probably because the DNS is misconfigured. DNS is a service that translates domain names into IP addresses, and if DNS is misconfigured, then the computer will not be able to resolve the domain name and thus cannot access the internet. You can try changing the DNS server address or resetting the local DNS cache.

2.Network Misconfiguration: Sometimes, due to some network configuration errors, the computer may not be able to connect to the internet properly.

For example, the IP address and subnet mask settings are incorrect, or the NIC driver is not installed correctly. In this case, you can check the network configuration and make the necessary changes. 3.

Firewall settings: The computer can ping the IP address and gateway, but it can't access the Internet, probably because the firewall settings are too strict, blocking the connection to the Internet. You can try turning off the firewall or changing the firewall settings.

4.Network failure: Finally, the computer cannot access the Internet, which can also be due to a network failure.

For example, network line failures, router failures, or Internet Service Provider (ISP) failures, etc. In this case, you should resolve these issues by contacting your ISP or router manufacturer, etc. Hope mine works for you!

Have a great day! Give a thumbs up in the bottom left corner! Thank you!

What is the reason why the computer can ping the IP and gateway, but cannot access the Internet?

If your computer can ping the IP address and gateway, but can't access the Internet, it could be one of the following causes: Wrong DNS settings: If your computer can't resolve a domain name, for example, it could be caused by or back to incorrect DNS settings.

Please check your DNS settings to make sure they match the information provided by your network provider. Wrong firewall settings: Wrong firewall settings can prevent your computer from communicating with the internet, resulting in inaccessibility to your website.

Please check your firewall settings and make sure they are not blocking internet access. Network failure: If your computer is unable to connect to the internet, it may be due to a network failure.

Please check that your network hardware, such as routers, switches, or modems, are working properly and that they are connected correctly. DHCP Setup Error: If your computer uses DHCP (Dynamic Host Configuration Protocol) to automatically obtain an IP address, you may have a DHCP setup error.

Please check your DHCP settings and make sure they are correct. Malware infection: Malware infection can also lead to the inability to connect to the internet.

Please run an updated antivirus to detect and remove any malware.

If your network cable is Netcom and Tietong. The ping doesn't work. It's telecommunications. You'll be able to ping. It's the ISP's problem, and the firewall can't be turned on.