How to find a few points in reversing and warehousing, and how to find points accurately in reversin

The so-called point is the point where you use a certain point as your visual reference to perform a specific action in the process of reversing into the warehouse. Whether it is the right or left storage, the most important points are two, that is, the point where you kill the steering wheel to the right (left) when the storage is reversed, and the parking point where the brakes are stepped on when the storage is almost completed. Now let's talk about the point of the right inverted library.

The first point, the point where the steering wheel is killed to the right, has several reference methods for the first point, the first way: the left rearview mirror coincides with the right starting line. The second method: the angle between the center column of the right rear window and the edge line of the library mouth coincides. According to me.

Understanding these two approaches is a common point for coaches. I have spent time practicing both methods, and I have practiced and verified them many times, so I recommend you to use the first method.

The second point, when the body has been completely reversed into the garage, the body has been straight and in the center of the garage, then it is time for the right storage to be completed and parked, and the parking point at this time is what we call the second point. The second.

There are also two methods that are commonly used. The first method: look at the left rearview mirror and the edge of the library, when the lower edge of the left rearview mirror coincides with the edge of the library, when the edge of the library mouth is just not visible under the left rearview mirror (note that you can't see the edge just now.)

line), step on the clutch and brake, stop, and the right reverse into the garage is completed. The second method: look in the left rearview mirror and stop when you see the front corner of the left door handle in the left rearview mirror and the bottom line of the garage. I recommend the first option.

Law. Because if the second method is used, it has a lot to do with the adjustment of the rearview mirror, and it is not a correct method at all after my verification, so it is recommended that you do not use it.

There is a seven-meter line out of the garage, the car can not see the seven-meter line to kill the steering wheel, continue to move forward the car will be wheeled, there is a stop line in front of the garage to stop the door!

The car is in the garage, 1st gear forward, straighten the steering wheel:When the front cover of the car is about to press to the front sideline, immediately hit the steering wheel to the right, and when the body is about to be horizontal, hit the direction and return to the body.

First tow the car to the appropriate position, hang back gear, loosen the clutch, slow speed, observe from the driver's point of view, when looking at the ground transverse white dotted line forward over the lower edge of the left rearview mirror, the white dotted line is completely invisible by the rearview mirror, immediately to the right quickly kill the steering wheel, continue to retreat, eyes staring at the right rearview mirror, slowly retreat.

Point 1: Timing to kill the steering wheel to the right: Tip: When the lower edge of the rearview mirror coincides with the yellow line at the starting point, quickly hit the direction to the right.

The second point: the timing of the steering wheel: the trick: when the car is about to enter the garage, when the car is about to be parallel to the library sideline, return to the right direction.

The third point: the timing of parking after entering the warehouse: when the lower edge of the left rearview mirror just covers the exit line, stop.

The first point. When the source, such as the lower edge of the left rearview mirror, coincides with the starting point induction line (usually the yellow dotted line), it is killed to the right. But it should be remembered that the yellow line itself also has a width, and the timing of this overlap must be grasped well, following the principle of hail Lu Qining sooner rather than later.

The second point. If the interval is less than 30cm, you can adjust the direction of a circle or half a circle, and wait until the corner line of the library reaches the lower edge of the rearview mirror, and then hit the direction to the right; If the interval is greater than 30cm, the steering wheel does not need to move, and it is OK to reverse to 30cm.

The third point. When the lower line of the left rearview mirror coincides with the left exit line, you can stop. These points can be prepared in advance, because you can also make adjustments in advance, and it will be more difficult to adjust after the point.

The fifth point. After completing the reversing into the warehouse, start to go out of the warehouse, keep the direction back to the right, go straight forward, when the vehicle engine cover covers the front roadside line quickly to the left to kill the direction, because of the personal experience of Sun Gao difference, this point may be different, you can try a few more times, to find the most suitable position for yourself.

The sixth point. After leaving the warehouse, observe the left rearview mirror, when the left side of the induction line appears on the lower edge of the left rearview mirror, stop the station, the direction to keep the left to kill the state do not move, and then start the left rearview.

In the first step, we will park the car in the designated area, and then reverse gear to reverse, at this time look at the left rearview mirror, when we see the left sideline on the lower edge of the left rearview mirror, the steering wheel is killed to the right.

The second step, by observing the right rearview mirror, when the rightmost line is exposed, the distance between the body and the library angle is less than 30cm, back half a circle, (if the distance is about 30cm, the left sedan knows the right, do not need to correct, continue to reverse);

The third step, the vehicle slowly retreats, after determining that the right wheel can enter the garage smoothly, you can observe the situation of the left wheel through the left rearview mirror, when the body is parallel to the library sideline, quickly return to the right direction;

The fourth step is to observe the left rearview mirror, keep the body parallel to the edge line of the library, and stop at the position of the closed left mirror when the front line of the library appears.

What do you think about reversing in and out of the warehouse?

When the vehicle is out of the garage, observe the left rearview mirror, when the rear wheel rolls the virtual horizontal line of the library mouth (there is no broken line at the library mouth, it is aligned with the horizontal line of the library mouth) can be directed to the right or left.

Honda Jed's fuse box is inside the small storage box on the left side of the main driver, which can be opened directly.

Honda Jade Fuse Box** is as follows:

<>Here's an introduction to the fuse box:

Changji fuse box refers to the box (also known as the fuse holder) for installing the fuse, which is convenient for the installation of the fuse, and some of them have the performance characteristics of waterproof, fireproof, and high temperature resistance (depending on the material and shape). Fuse boxes can be divided into leaded fuse boxes and automotive fuse boxes. The universal injection molding materials for fuse boxes are:

Plastics, nylon, bakelites, PBT engineering plastics. Each material is different, and its degree of resistance to high temperatures is different. In the process of selecting the fuse box, the current of the fuse used should be taken into account, the size of the fuse requirements, the larger the fuse current, then the larger the wire rod should be selected in the fuse box matching wire, otherwise it will cause the fuse box and the wire to heat up, leading to disaster.

The first point: The first point can look at the hood of the front of the car, when the hood covers the parking line, kill the steering wheel, this is the first point. The second point:

The second point can look at the left rear wheel of the car, when the left rear wheel is about to leave the garage, quickly hit the steering wheel to the left, so that the operation can also be.

The subject 2 test is a relatively difficult subject in the whole driving test late course, and many students make mistakes in it. There are many reasons for failing the course: the clutch is not well controlled, and the ignition is turned off. Or the point is not good, the line is pressed, etc.

In the second exercise, what I heard the coach say the most was to control the clutch, control the speed and position of the car, and control the steering wheel. It can be said that if you master these points well, it is still easy to pass the subject 2 exam. In the subject 2 exam, reversing into the warehouse is also a more difficult item.

When the second subject reverses the car into the warehouse and leaves the warehouse, it is optimistic that any of these two points can be used to ensure that the car does not press the line and goes out of the warehouse smoothly.

In the practice of subject 2, when reversing into and out of the warehouse, you can try it according to these two points.

After parking in the garage, through the lower edge of the left rearview mirror, a part of the horizontal line must be seen as the best; If the horizontal line is not visible at all, the reference point of the parking is not so accurate, and it is easy to pour out the tail rolling line in the storage area.

The following points need to be paid attention to when reversing into and out of the warehouse:

1. Observe the rearview mirror.

When leaving the warehouse, you need to observe the rearview mirrors on the left and right sides to ensure safety. When reversing into the garage, you need to pay special attention to the left rearview mirror, and stop when the left reversing starting point induction line appears on the lower edge of the left rearview mirror.

2. Observe the body and the road.

When reversing into and out of the garage, it is necessary to carefully observe whether the body is parallel to the road, and pay attention to whether the body is at a certain distance from the corner tip of the warehouse.

3. Pay attention to adjusting the steering wheel.

When reversing into the garage, it is necessary to adjust the angle of the steering wheel according to the position of the sensing line and the distance between the body and the corner of the garage. When leaving the garage, the steering wheel steering degree needs to be adjusted according to the road conditions and the position of the vehicle.

Fourth, the use of references.

In order to more accurately determine the distance of the vehicle from the corner of the garage, a reference object, such as chalk or similar material, can be placed at the location where the vehicle is reversed into the garage for reference. When leaving the warehouse, you can use road signs, street signs, etc. as references to help determine the direction and route of travel.

In short, when reversing into and out of the garage, it is necessary to carefully observe and adjust the position and direction of the vehicle, and smoothly control the steering wheel to ensure safety. The above is a basic introduction to the reversing and outbound points I gave based on the Internet knowledge I found, I hope it can help you.

How do you find a place to turn the warehouse to the right?

The so-called point is that in the process of reversing into the warehouse, you take a certain point as a reference point for your specific actions. Regardless of whether the warehouse is reversed right or left, there are two most important points, that is, the point where the steering wheel is killed to the right (left) when reversing the warehouse, and the stopping point where the brake is applied when the warehouse is almost finished. Now, let's talk about the library falling to the right.

The second method: the angle between the middle column of the right rear window and the edge line of the library entrance coincides. As far as I know, both methods are generally accepted by coaches.

I took the time to practice both methods. After many practical tests, I recommend you to use the first method.

The second point is that when the body has been completely reversed into the garage, the body is straight, and it is in the center of the garage, then the right side of the garage is about to be completed, and the parking time is up. The stopping spot at this time is what we call the second point. The second point is also commonly used in both ways.

The first method: look at the left mirror and the edge of the garage door. When the lower edge of the left rearview mirror coincides with the edge of the garage door, when the edge of the garage door is just not visible on the lower edge of the left rearview mirror (note that the edge line is just not visible), press the clutch and brakes, stop the car, and reverse the car to the right to complete the storage.

Because if the second method is adopted, it has a lot to do with the adjustment of the rearview mirror, and after my verification, it is not the right method at all. It is recommended that you do not use it.

Pacific Code Oak Jane Automobile Network ().

Millions of car purchase subsidies.