What material can be folded but there is no gap 10 when opened

1. All steel rims. There doesn't seem to be a single sale. The reason is very simple, a reflector costs only ten yuan, and it is often a cloth wrapped outside the ring that is easy to break. As long as you don't break ruthlessly, when the steel ring is broken, the reflector will not be used properly.

Norm no, no, no.

Just buy a reflector... A few dozen dollars is not expensive...

The swan flies away and the bird does not return, nostalgic for the empty bother, the double dagger shadow under the moon in the clouds, the water meets in several places, the sunset and the moon rise and lean on the moon, and the single nobles follow each other.

The good materials of the sunshine folding door are as follows:

1. Titanium-magnesium alloy material: It is a relatively high-grade material. In terms of thermal insulation, it is better than aluminum-magnesium alloy material.

Titanium-magnesium alloy folding door its synthesis not only has titanium and magnesium elements, but also has carbon fiber materials. But because its materials and functions are good, it will also be higher.

2. Aluminum-magnesium alloy material: its main synthetic element is aluminum and the mixture of magnesium is added, which is both light and increases its hardness. Because it is made of metal, its thermal conductivity and thermal insulation effect are very good, but its hardness is not very high! And ** is also quite high.

3. Wood material: It is mainly made of solid wood, which is rich in color and has a lot of styles to choose from. However, it should not be exposed to the sun for a long time, otherwise it will easily crack.

Titanium-magnesium alloy is better, the general convenience is used in this material, like the decoration problem, you can visit the togo forum, the decoration knowledge is still very complete, such as swing doors, spelling doors, hanging doors, etc. are more titanium magnesium alloys.

Folding doors are generally made of aluminum alloy on the market, because of good elasticity, durability and beauty.

The general profile is mainly divided into aluminum alloy and plastic steel, if it is an ordinary household aluminum alloy is good, if there is a requirement for heat and sound insulation, it is best to use plastic steel profile.

Suzhou Xinxin pvc folding door is easy to use.

Titanium-magnesium alloy folding doors are better, beautiful, strong, well sealed, and also durable. It is mainly suitable for partition purposes in workshops, shopping malls, office buildings, exhibition halls and home decoration and other places, screen use, inner doors and outer doors can be installed and used. It can effectively play the role of temperature insulation, dustproof, noise reduction and sound insulation, shielding, etc.

Installation method: Confirm whether the length of the track is correct, if it is too long, use a saw to see off the long part. Be careful not to let the sawdust get into the tracks.

Insert the folding door into the track in a bundled state.

Confirm the direction of the handle and the direction of the simple lock, and then install the rail. Screw on the screws from the center to the left and right. After installation, untie the rope that binds the folding door.

Install the suction plate, align it with the position of the magnet on the folding door in advance, and then tighten the suction plate with screws.

It's better for you to use sealant. General quality will solve the problem.

The technical content is not high, and I am afraid that people will guess the use. But at least let's talk about the approximate purpose.

Add a small amount of acrylic cotton in the middle of two layers of cloth to make a small bag.

Generally, there is a cloth shop in the community, and cloth and cotton can be bought together.

It's better to make it clear what to use it for? Or what products?

You can tell you what you're using it for!

A good silk fabric is basically crease-free, unless you press it for too long, and the silk fabric has a strong sense of sagging.

I used to have a pair of pants that I wore for a few years without creases, and when I went out with them, I couldn't fold them, so I had to take them with me.

I don't know what else it is.

One is that there may be a problem with your mold.

Second, it is possible that the guide angle of the four corners of the copper bar is too small, and it is easy to crack when bending.

Third, it may be the purity of copper, with impurities or bubbles.

Executed on our side.

I don't know what the bending angle of your busbar is, but I haven't seen a crack in a 90-degree bend.

You first look at the mold, the chamfer of the copper row, and finally the poor purity, the regular manufacturer's row generally does not have this situation;

The busbar seems to have a special elbow, right? Not a direct turn.

There is a problem with the mold you are using, and you check the construction.