I have developed a product and want to get it for testing by the Quality Supervision Bureau, what pr

Testing in the subordinate institutions of the Quality Supervision Bureau, general commodities in the testing center (some places are divided into quality inspection institutes and metrology institutes, and some are combined together to call the testing center), textiles in the fiber inspection institute.

Testing requires a testing fee, which is not low.

If you go to the Quality Supervision Bureau for testing because of product quality problems and disputes with merchants, you will fall for the merchant.

The seller said, my product has no quality problems, you think there is a problem, you take it to the Quality Supervision Bureau to test, people say it is not qualified. It's actually a trap.

The testing has very high requirements for samples, especially for the testing of disputes, which requires the presence of both parties to conduct multiple sampling of the tested samples, and the conclusions drawn have legal effect.

The reason why the sellers say the Quality Supervision Bureau is because the Quality Supervision Bureau can't control them, the Quality Supervision Bureau is only responsible for the production link, the market is responsible for the Industrial and Commercial Bureau, and the sellers are afraid of the Industrial and Commercial Bureau, not afraid of the Quality Supervision Bureau. In case of consumer disputes, call 12315 consumer complaints**, mediated by the Industrial and Commercial Bureau, even if there are quality problems, the industrial and commercial department should also send it to the quality supervision department for inspection, so as to avoid a lot of legal problems.

If there is a national standard, it will be in accordance with the national standard, or the past ministerial standard, there is none, you need to formulate your own enterprise standards.

The specific cost is determined according to the test item.

There is a problem with the cement I use, it has been four or five days, and it is not very strong, what should I do.

After payment, the sample test is unqualified, and the notice of rectification of the sample is sent for inspection, do I need to pay separately?

I want to test the milk powder, but I don't know how to go to the test.

Not necessarily.

It depends on the situation.

See why you want to get tested.

Normally, I don't want to, I haven't heard of this.

The Quality Supervision Bureau is an administrative agency, and it does not have the ability to test the total number of bacteria in the product, and you should be referring to the Quality Metrology Supervision and Inspection Institute directly under the Quality Supervision Bureau. The total number of bacteria can be detected, but the specific charge depends on your product, you can call the local quality supervision ** "12365" for free consultation.

You can directly send the product to the inspection and fill in the relevant procedures, but the inspection report of the quality supervision department is only responsible for the quality of the samples you submit for inspection and issue a report.

I am here in Harbin City, and if the filing enterprise standard, the cost is about 2,000 yuan. This involves the cost of a bid review meeting, at least 7 brick houses, each brick house car and horse fee of 200 yuan, plus the conference fee, ushered in the send, quite expensive. Therefore, it is generally OK to give 1,400 yuan to the person in the Standards Department of the Technical Supervision Bureau, plus about 500 yuan for the filing fee, and you don't have to worry about the rest.

If the expert reviews and signs something, they will do it for you, and then you will get a corporate standard stamped with a special seal for the record. However, this standard is time-sensitive, and it will be invalidated in a few years, and it will cost money when the time comes, hehe!

According to the notice of the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the National Standards Committee on the issuance of the "Regulations on the Administration of Enterprise Product Standards" (Guo QPI Biaolian [2009] No. 84), Article 22 of the "Regulations on the Administration of Enterprise Product Standards" stipulates that no fees shall be charged for the filing of enterprise product standards. Article 9:

The enterprise is responsible for organizing the review of enterprise product standards, and may also entrust a professional standardization technical committee, industry association or other technical organization to be responsible for organizing it. Article 10: The experts who participate in the review of enterprise product standards have also made corresponding provisions, which greatly facilitates enterprises and reduces the burden on enterprises.

The product quality inspection report is not a certificate, and neither the national nor the international technical regulations stipulate the validity period of the test report.

The inspection report itself does not have the validity of the problem, the so-called validity period of the inspection report actually refers to the validity of the inspection report (the test report only represents the quality of the tested batch, and has nothing to do with the shelf life, if it is to see the type report, it is valid within half a year or one year), it should be said that the inspection report is for the inspected (spot checked) batch of products, and the test results (conclusions) should be valid forever (of course, if the inspection report is wrong, don't say anything), When the batch of products has been consumed and used by consumers, the historical mission of the inspection report is basically completed, and the remaining role is to carry out quality traceability for future reference.

Neither the existing national nor international technical regulations stipulate the validity period of the test report. In order to standardize the mutual recognition of test reports by certification bodies of various countries and improve the validity of reports, the IECEE-CB system of the international certification organization recommends that the test reports that are valid for more than three years or modified more than three times should be sent for re-checking.

1. The so-called validity period of the inspection report actually refers to the validity of the inspection report (the test report only represents the quality of the tested batch, and has nothing to do with the shelf life, if it is a type report, it is valid within half a year or a year), 2. It should be said that the inspection report is for the batch of products inspected (spot checked), and the test results (conclusions) should be valid forever (of course, if the inspection report is wrong, don't say anything).

3. When the batch of products has been consumed and used by consumers, the historical mission of the inspection report is basically completed, and the remaining role is to carry out quality traceability for future reference.

Determination of the validity period of product quality supervision and inspectionStrictly speaking, the product quality inspection report has no expiration date. The product quality inspection report does not reflect the expiration date, but the testing date of the product and the date of sample delivery.

But the customer will generally be asked by the customer or **JD to show the product quality inspection report within the validity period, what is going on?

1 E-commerce platforms such as JD.com and Tmall generally require that the quality inspection report of the product must be within four years. (Select the sample collection date plus the date four years later, for example, the sample collection date is April 16, 2017, and the expiration date is April 16, 2021).

2 ** The validity period of the product quality inspection report required by the business varies from person to person, if your customer just wants to know whether your product is qualified, not limited to a few years to do, then the product quality inspection report is valid for a long time. If your supplier requires you to show it within three years or five years, then your product quality inspection report is valid for three or five years.

Validity period of product test report.

If the report is valid for three years or has been modified three times, the inspection report should be sent for verification.

Is there an official document issued by ** to do product testing quality? Thank you!

There is no expiration date and is only valid for that batch.

Hello, we need an inspection report.

The inspection report can only prove that the inspected batch is valid. Personal understanding.

Depends on what you're testing......Like us in Wuzhou, the three indicators of rosin glycerol color, softening point and acid value are tested, and the fee is 400. It's not cheap! As for the rest, there should be, but you don't know about it.

What is your product and what tests do you want to do?

(A) is responsible for the social public measurement standard instruments, departments, enterprises, institutions used by the highest measurement standard instruments, as well as for the settlement, safety protection, medical and health, environmental monitoring of the compulsory verification of the measuring instruments included in the compulsory verification catalogue of compulsory verification work.

2) Responsible for the length, thermal, mechanical, electrical and other measuring instruments of enterprises and institutions to carry out verification and repair and calibration according to law.

3) Responsible for being authorized to participate in the standardized assessment of the highest measurement standards used by enterprises and institutions within the administrative area of the city.

4) Responsible for accepting the relevant measurement product testing, and issuing scientific, fair and legally effective measurement data; Undertake relevant measurement technical consulting services.

5) Undertake other tasks assigned by the leaders of the Bureau and the superior leadership departments, and assist in cooperating with the work of other departments within the Bureau.

The above friend answered very comprehensively, and its name is "Quality and Technical Supervision and Testing Institute". "Testing" is the abbreviation of inspection, verification, and testing. The testing institute is a public institution under the Quality Supervision Bureau.

It's the Metrology Institute, the following public institution.

It is recommended that you consult with a law firm. The answer there is more reliable, safer, and more advantageous.

This unclear but professional third-party testing agency, the scientific standard can be tested.