Who knows the latest implementation standard of slacks

1. Fabric. 1 No bleaching, the ingredients are correct.

2. Drawing, crocheting, and colored yarn are not accepted, and yarns that are thicker than normal yarn 1 2 are not acceptable.

3 There should be no holes in the fabric.

4. There should be no color difference in the fabric.

5. Fleece fabric, according to the requirements of the whole single in the same direction or the whole body in the same direction.

2. Auxiliary materials. 6. The excipients are complete and consistent.

7. The material shall not be mutilated or broken.

8. The content of the excipients is correct and reliable.

9. The adhesive lining should be firm, no foaming, no glue, no degumming.

10. Sewing thread, keyhole thread, jujube thread, phoenix eye core color with fabric color (except decorative line), nail button line color with button color.

11 buttons, zippers color, good texture, smooth and durable; Metal attachments must not have rust stains.

12. The sewing position of the accessories should be correct.

3. Sewing. 1) Sewing.

1 Stitch density.

Serial number item stitch density.

1 Light and dark lines should not be less than 9 stitches per inch.

2 Three-thread overlock with no less than 10 stitches per inch.

3 Five-thread overlock seams with no less than 10 stitches per inch.

4 Keyhole wire not less than 10 stitches per centimeter.

5 Nail buckle threads No less than 6 threads per eye.

2 The density of the stitch pitch should be uniform.

3. Continuous skipping stitches are not accepted, two single skipping stitches are not accepted within 30cm, and jumpers are not accepted for chain wires.

4 Disconnection is not accepted.

5. The mouth should be even, and the pit should not be accepted.

6. Bursts are not accepted.

7 Barge lines are not accepted for all open lines.

8. All wiring points must be completely overlapped, and there must be no wire clusters; The inverted needle is beautiful, and there is no thread ball.

2) Jujube.

1. The position of the jujube is correct, and the jujube is beautiful and clean.

3) Open the bag.

1 The bag should be opened squarely, not crooked.

2. The mouth of the bag is not allowed to have hairy mouths and tattered.

4) Size.

1 waist circumference size deviation + -2cm within.

2 trouser length size deviation + -2cm within.

3. The allowable deviation of the size of other parts is within one centimeter of the tolerance of each part.

Fourth, washing 1 washing effect back to the confirmation board.

2 Do not have yin and yang colors in the washing water.

5. Ironing. 1 The finished product should be ironed flat, especially in the front position.

2 Do not burn yellow.

3 Do not burn the mirror.

4 No water stains.

5. Do not bleed the glue.

6. Appearance. 1 No stains.

2 The inner and outer threads must be cut clean.

3. There should be no floating lines and dust on the finished product.

7. Packaging. 1. Packing according to our requirements.

2. The article number, the number of small sizes and other related matters should be indicated on the outer box.

GB T22700-2008 This is a washed finishing garment: There is no professional national standard for casual pants, and only the industry standard can be applied: FZ T81007-2003 single and clip clothing.

However, there is also a local standard for slacks in Fujian: DB35 T 958 2009 "Men's Slacks".

The latest implementation standard for casual pants: GB T22700-2008

The implementation standard of general pants is divided according to the major categories, such as weaving and knitting, and then according to the composition of the fabric

1. The implementation standard for wool-containing fabrics is GB T 2666-2009;

2. The wool-free cotton and linen chemical fiber pants are implemented according to FZ T 81007-2012, which is usually the casual pants;

3. There is also a special category of jeans, which is implemented according to FZ T 81006-2007;

4. Silk pants can be implemented according to the silk product standard: GB T18132-2008.

Knitted pants can be divided into the following types:

1. Knitted slacks: FZ T 73020-2012;

2. Knitted sweatpants: GB T 228530-2009;

3. Knitted and woven pants: GB T 26385-2011;

4. Knitted cotton pants: GB T 26384 -2011.

The implementation standard of general pants is divided according to the major categories, such as weaving and knitting, and then according to the composition of the fabric, the weaving mainly has the following situations: the standard of the hairy face finch friend material is GB T2666-2009, and the wool-free cotton and linen chemical fiber pants are implemented according to FZ T81007-2012, which is usually the slacks; There is also a special category of jeans, which is implemented according to FZ T81006-2007; The silk pants can be carried out according to the silk product standard: GB T18132-2008; And knitted pants can be divided into:

Knitted Casual Pants: FZ T73020-2012 Knitted Sweatpants: GB T228530-2009 Knitted and woven pants:

GB T26385-2011 Knitted cotton pants: GB T26384-2011 China's implementation standards due to the different institutions that set the standards, so the standards are also ever-changing, but the product standards are not mandatory standards, so pay attention to them when choosing, to see which standard is suitable for their own products, the least risk, which one will be better.

Legal analysis: the implementation standard of general pants is divided according to the major categories such as weaving and knitting, and then according to the composition of the fabric, the main cases of weaving are as follows: 1. The implementation standard of wool-containing fabrics is GB T 2666-2009; 2. The wool-free cotton and linen chemical fiber pants are implemented according to FZ T 81007-2012, which is usually the casual pants;

Legal basis: Article 502 of the Civil Cave Code of the People's Republic of China A contract established in accordance with law shall take effect upon its establishment, unless otherwise provided by law or otherwise agreed by the parties.

In accordance with the provisions of laws and administrative regulations, if the contract shall go through formalities such as approval, it shall be determined in accordance with its regulations. If the failure to go through the formalities such as approval affects the validity of the contract, it does not affect the validity of the obligation clauses in the contract such as the performance of the right and the approval of the company, as well as the validity of the relevant clauses. If a party who should go through formalities such as applying for approval fails to perform its obligations, the other party may request that it bear responsibility for violating such obligations.

Where, in accordance with the provisions of laws and administrative regulations, the modification, transfer, or termination of a contract shall go through formalities such as approval, the provisions of the preceding paragraph shall apply.

Summary. Kiss, in this case, help you find this, the implementation standard of general pants is divided according to the major categories such as woven and knitted, and then according to the composition of the fabric to divide, woven mainly in the following situations: 1. The implementation standard for wool-containing fabrics is GB T 2666-2009; 2. The wool-free cotton and linen chemical fiber pants are implemented according to FZ T 81007-2012, which is usually the casual pants; 3. There is also a special category of jeans, which is <> [than heart] [than heart].

Kiss, in this case, help you find this, the general implementation standard of pants is divided according to the major categories such as weaving and knitting, and then the shed search according to the composition of the fabric to divide, woven mainly in the following situations: 1. The implementation standard for wool-containing fabrics is GB T 2666-2009; 2. The wool-free cotton and linen chemical fiber pants are quietly held according to FZ T 81007-2012, which is usually the casual and slag pants; 3. There is also a special category of jeans, which is <> [than heart] [than heart].

If my answer is helpful to you, please also give a thumbs up (in the lower left corner of the ambush brigade into the Yu Hall annihilation evaluation), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that my answer is still satisfactory, you can click on my avatar to consult one-on-one. Finally, I wish you good health and a good mood!

The implementation standard of pants is based on the national standard "GB T 2662-2017 Classification and Inspection Methods for Combustion Performance of Textile Fabrics" and the standards formulated by the enterprise itself for production quality inspection. These standards include aspects such as the quality, functionality, safety and hygiene of fabrics.

However, it is important to note that different countries and regions may have different standards for the implementation of pants. For example, the U.S. may have a different enforcement standard than the European national enforcement standard or the Chinese enforcement standard. Therefore, if you are buying imported pants, you need to understand the enforcement standards of your target market to ensure compliance with local regulations.

The implementation standard focuses on fabric quality, safety, hygiene and other aspects. In terms of quality, the implementation standard usually focuses on the fit of the pants, the accuracy of the size, and the craftsmanship of the fabrication. In terms of safety, the implementation standard of pants covers the testing requirements for flammability, explosiveness, fluorescent brighteners, formaldehyde, heavy metals, etc.

In addition, in terms of hygiene, the pants implementation standard takes into account the safety, classification, contact, etc. of the dye.

In addition, when formulating the implementation standards for pants, enterprises will also refer to factors such as market demand, fashion trends, environmental protection requirements and production costs. Some manufacturers will even adopt higher standards to ensure the quality and safety of their products, so as to improve the competitiveness of their products.

In conclusion, the implementation standard of pants is the specification of the relevant standards of the enterprise and the industry, aiming to ensure quality, safety and hygiene. These standards can provide a valuable basis for consumers to choose pants, and ensure the quality and competitiveness of enterprises. <>