There is water vapor in the phone. How to get rid of it

If your mobile phone is flooded with water or liquid, it is recommended that you do not try to turn it on to prevent damage to the internal components due to a short circuit inside the machine (if the machine battery is removable, it is recommended to remove the battery). Samsung mobile phones generally recommend that you bring the machine to the local after-sales service center, and the engineer will help you test, the specific cost is subject to the test results of the service center.

Samsung Service Center Address Information Customer Service**, you can inquire through the following methods: Please log in to the service center page of Samsung's official website, select the product you want to inquire about and the province and city where you are located to search.

Open the lid and let it air dry as well.

If the mobile phone is flooded with water or liquid, it is recommended that you do not try to turn it on to prevent damage to the internal components due to a short circuit inside the machine (if the machine battery is removable, it is recommended to remove the battery). It is recommended that you bring the machine to the local Samsung after-sales service center, and the engineer will help you test, and the specific cost is subject to the test results of the service center.

Be careful with a hair dryer.

Blow it alternately, and then put it in a ventilated place for a while after searching and grinding the ear. In sunny and dry weather, it can be left to dry in the sun for a while, and at the same time, you need to pay attention to dust prevention.

Some mobile phones can be turned on and used normally after simple processing, but mobile phones are made of precision electronic components.

There is a hidden risk after water ingress, so it is recommended not to try to turn it on.

Wipe it with a dry soft cotton cloth, generally do not use detergent to wipe it, the inside is foggy: put the phone in a dry environment, and the water vapor will disappear after a while. If it doesn't go away, you can also try other methods.

If it's rainy, put your phone in an airtight jar and put a packet of desiccant.

After a while the water vapor disappears.

Do not bake with a hair dryer or stove after water is in, so as to avoid liquid Shibu being blown into the phone and the high temperature damaging the phone.

Then dry it radially with a dry glasses cloth in one direction. Do not wipe the lens back and forth, left and right, as this can easily cause wear and tear on the lens.

How to make a noise about the water vapor inside the mobile phone, put the mobile phone into the rice pile, or the rice key wheel in the valley, half an hour to an hour later, the inside of the hand is basically dry! There is also a hair dryer, cold wind blowing mobile phone, air dry the gas in the manuscript!

It is recommended to send it for maintenance, let professionals disassemble and repair it, and also prevent this situation from happening next time, for example, a sealed bag was originally very well sealed, burning guess the skin but one day there was water inside, at this time, there is no skin difference on whether you are drying or blowing with a hair dryer, the effect of trillion deficiency will not be ideal, the best way is to open and dry, the same is true for mobile phones, maybe it will be temporarily dried out of sight, but it is still easy to come out when cold and hot water, so it is best to repair.

This means that there is moisture in the phone, you can go back to the repair shop to find a master to disassemble the phone, and then use a hair dryer to dry the leakage parts inside.

When there is water vapor inside the mobile phone, Hu He, must not turn on the lead machine, it is easy to damage the mobile phone, try to find a hair dryer or, a well-ventilated place, put the mobile phone there, let it dry the water, and then turn on the machine to check after the water is completely dry, indicating whether it is high and in good condition.

There is water vapor inside the phone, which must be caused by you bringing it into the bathroom when you are taking a bath, in this case, you can only ask a professional master to deal with it.

The correct method is to open the cover immediately, check whether there are water droplets inside the mobile phone in an emergency, and if there is a direct electric hole balance pool, directly force the power off, which can ensure that the motherboard is not invaded by water. Key Trembling Tung.

There is water vapor inside the phone, what should I do? Remove the phone, put it in the sun, dry it naturally, and then assemble it back.

The water vapor inside the mobile phone is generally caused by too much humidity in the air, and it can be heated slowly with a hair dryer, which can effectively remove the water vapor.

You can use a hair dryer to blow continuously until the internal water vapor is dry.

If you find that there is water vapor in your phone, it is best for you to go to a mobile phone repair shop to disassemble your phone and take care of it.

If it's a hand, what if there's water vapor inside the phone? I think it's better to find a maintenance person to carry out the maintenance before carrying it.

Before the water vapor is cleared, do not use socks, otherwise, it is easy to cause a short circuit, then it will cause damage to the water phone, so this is the key.

Placed in ventilated sunlight, moisture can be reduced.

There is water vapor inside the phone, which means that your phone has been flooded, so it is reflected in the lack of water vapor in the hand.

There is water vapor inside your phone, which means that your phone has been flooded. That's why the embodiment of the phone has water vapor.

Hello dear <>

You can be careful to alternately blow it with a hair dryer, and then let it sit in a ventilated place for a while. In sunny, dry weather, it can be left to dry in the sun for a while, and you need to pay attention to dust protection. 2 6 Some mobile phones can be turned on and used normally after simple processing, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

3 6 Wipe it with a dry soft cotton cloth, generally do not use detergent to wipe, internal fogging: put the mobile phone in a relatively dry environment, generally after a period of time the water vapor will disappear. If it doesn't go away, you can also try other methods.

4 6 If it is a rainy day, then put the mobile phone in a sealed jar indoors, put in a packet of desiccant, and the water vapor will disappear after a while.

The solution to water vapor entering the mobile phone screen is as follows:

1. If the screen of the mobile phone is flooded, the mobile phone should be put in reverse immediately, and the screen should be placed downward so that the water will not be entered into the machine.

2. The correct way is to open the outer cover immediately, check whether there are water droplets inside the mobile phone in an emergency, if there is a direct battery to take off, directly force the power off, can ensure that the motherboard is not invaded by water. (It's best to use a hair dryer, use a breeze to dry your phone, and blow slowly on the screen, don't move your hands when blowing, be gentle) so that your phone may have miracles.

3. The mobile phone has entered the water, remember not to do any key actions, especially to turn off the computer (as soon as you press any action, the water will immediately follow the circuit board).

Mobile phone is a portable terminal that can be used in a wide range, the full name is mobile**or wireless**, originally just a communication tool, in the early days in China had the common name of "big brother". The mobile phone was first developed by the battlefield mobile phone manufactured by Bell Labs in 1940, and then Martin Cooper, an engineer from Motorola in the United States, invented the world's first commercial mobile phone in 1973. In addition to the typical random features, modern mobile phones also include more features such as cameras, GPS, and Internet connections, which are all broadly referred to as smartphones.

Method 1: Find a small screwdriver.

Disassemble it, pry open the shell with your thumbnail and take it to dry; If there is also water in the screen, the LCD screen.

There is a wheel block backlight plate on the back, use a hair dryer to blow the screen hot, so that it is separated from the motherboard, and then separate the glass plate of the screen glass from the backlight plate with a knife and put it in a ventilated and dust-free manner.

place of the day. Or use a hair dryer to cool the breeze for a few minutes and wait for the water to dry.

Method 2: Disassemble it and blow it with a hair dryer, put it in something with strong water absorption, such as filter paper, etc., and leave a water imprint only by disassembling the machine and wiping it with a soft rag.

Method 3: Step 1: After shutting down, first wipe off the water on your phone case with a towel;

Step 2: Unplug the SIM card quickly.

keep it somewhere else;

Step 3: Use a paper towel to blot the water from the headphones, Dock and SIM card slots, or use a hair dryer to dry.

Disassemble it and blow it with a hair dryer, put it in something that has no strong water to suction the front and put it for a few hours, such as the base filter paper, etc., if you leave a water imprint, you can only disassemble the machine and wipe it with a soft cloth.

Remove the battery of the mobile phone, try to disassemble the mobile phone in pieces, and then put it in the sun or blow it with a hair dryer (the temperature should not be too high).

After the phone gets into the water, the first thing to do is to turn off the power, of course, instead of pressing the power off button, but remove the battery. Because as soon as you press the shutdown button, the mobile phone will be powered on, and it is likely that a short circuit will occur, causing damage to the mobile phone, and then send it for repair as soon as possible. If the warranty period of the mobile phone has expired and you don't want to send it for repair, you can boldly disassemble the mobile phone and wipe the parts of the mobile phone with facial tissue, and then blow it with a hair dryer for a few minutes.

2. Once the mobile phone gets into the water, the battery should be removed immediately, and the mobile phone must not be turned on immediately to understand the condition of the mobile phone. After removing the battery, do not use a hair dryer to deal with it, and immediately send it to the repair professional to disassemble the machine for water treatment, such as falling into sewage or corrosive liquid, and use ultrasonic cleaning and drying before proceeding to the next step of maintenance. If the mobile phone can still be used after water penetration, it should be sent to a professional to deal with it to avoid corrosion of the circuit board and make it impossible to repair.

3No matter what kind of water the phone falls into, you should remove the phone battery first and no longer power the phone. If it falls into clean water, remove the battery and clean the phone with anhydrous alcohol, because the alcohol volatilizes quickly, and the water on the circuit board can be volatilized together. Then use a heat gun or hair dryer to dry the circuit board, and then power up the test machine, and most mobile phones will work normally.

If it falls into the sewage, it should be cleaned immediately, and the dirt that can be seen should be cleaned first. Use a brush to brush off the impurities attached to the pins of the components. Then, the circuit board is scrubbed with an alcohol cotton ball, and if the pollution is serious, the impurities must be vibrated out with the help of an ultrasonic washing instrument.

Then use an air gun to dry the circuit board, and then repair all the chips.

Remove the battery, dry it for a few days, and then turn it on, try it, both hot and know that there is water ingress, and it is wrong to turn it on.

1. Take out the SIM card, the SIM card is not easy to be damaged when exposed to water, but take the SIM out of the mobile phone during operation.

2. Take out other less important parts, such as earbuds, memory cards, phone cases, etc.

3. Use a towel to dry the water on the surface of the mobile phone to avoid corroding the internal circuit of the mobile phone or causing a short circuit.

Fourth, the use of a vacuum cleaner can also suck out the water vapor inside the mobile phone, and focus on absorbing the water vapor on the watermarked screen when using. 5. Don't use a hair dryer to dry your phone directly (even in "cold air" mode). Using a hair dryer to blow directly will cause water vapor to enter deep into the device and come into contact with the electronics inside.

If it is too hot, it can also cause the phone case to melt.

6. You can put the mobile phone in a bag containing dry raw rice and seal it, and the rice grains will absorb the remaining water vapor until the water vapor disappears.

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

Remove the battery and blow it down with a hair dryer to see, if the screen is still not lit, it may be that the cable is broken after water ingress and needs to be repaired.

Take it to the mobile phone store and ask him to help you clean it, and it will break it yourself, at most dozens of dollars!

My Samsung i9220 also got into the water At that time, I immediately removed the battery and left it to dry overnight, but the next day the lens before and after turning on was broken I wanted to say that I would take it to repair, but the repairer said that I would change the lens and the motherboard may also have to be replaced Because it was damp, it was better to change it all So I went home and thought about it I still think that the main problem is that there is moisture in it The most important thing is to go to the dampness So I found the desiccant in various snacks and health products Wrap the phone with that kind of oil blotting paper and then put it in a sealed plastic bag Then put the desiccant into the bag and finally throw it into the rice box After two nights, it can be turned on and used normally, and the water mist in the lens is all gone, and everything is as it has been, haha