Blancpain Watches Aftermarket Watch Fogging?

1. Method 1: When the watch is fogged, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it at about 15 cm near a 40-watt light bulb, and bake it for about 30 minutes. Note: Do not bake the watch glass close to the fire to avoid deformation of the watch glass.

2. Method 2: Put the watch glass inward and the bottom case outward, and wear it on your wrist for two hours. Use your body temperature to drain the fog, which is suitable for small amounts of fogging.

3. Method 3: Pull open the head (crown) of the watch, use granular silicone, or desiccant in a snack bag, etc., and put it into a closed container with the watch that has accumulated water, and take it out after a few hours.

Or put the watch into the rice bag at home for a day, use the adsorption of rice to drain the fog must pay attention to the watch must be wrapped in glasses cloth or facial tissue first, to play a dust-proof role, the rice bag is a lot of fine dust, pull the head must be dustproof! This method can drain the more severe fog.

If the fogging of the watch is only a slight fogging, it is fine, just wear the watch in reverse for a while. If there is a slight bit of fogging, you need to open the lid of the watch, wrap it in a paper towel, blow it with a hair dryer, or place it next to a 40-watt light bulb and you'll be fine after a while.

If the fogging of the watch is so severe that it turns into water, it is recommended that you send it to the after-sales maintenance center [Room 1202, 12th Floor, Meilong Town Plaza, Nanjing West Road, Jing'an District, Shanghai] to deal with it, and do not dispose of it yourself to avoid damaging the parts.

If you find that the watch is flooded, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it about 15 cm near a 40-watt light bulb, and bake for about 40 minutes, and the water vapor in the watch can be eliminated. Do not bake the watch directly near the heat, so as not to deform the glass by heating. Because although there is no moisture on the dial, there may still be water in the movement, and the movement will rust and cause damage to the movement after a long time.

After the watch is flooded, it is recommended to find a professional repair outlet as soon as possible for the master to check and deal with it, which can reduce your unnecessary losses.

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby.

1.It is best to place desiccant in the place where the watch is placed, but avoid using chemicals such as mothballs and insect repellents.

2.Leather watches should be kept out of contact with water as much as possible to avoid the strap becoming stiff and smelly, which could lead to breakage.

3.If there is any abnormality in the watch, it should be sent to the nearest watch shop for inspection immediately.

4.The automatic watch must be worn for at least 10 hours a day under sufficient activity. Wearing again for the first time or with insufficient momentum.

5.Different watches should be worn on different occasions, such as sports watches with excellent waterproof and shock resistance.

If the watch needs to be repaired or maintained, or other needs, it is best to go to after-sales, which not only has a more professional technician and better service, but also its instruments will be more precise. ** It will not be reported like other places, there are standards. The after-sales service is on the seventh floor of Tower A on the side of Wanling Hui.

If the back cover is opened in a non-designated place, it will not be eligible for the warranty.

There is fog in the watch, which means that there is moisture in the watch. In general, although the watch is hermetically sealed, there are very small pores in the joints of the case, especially in used watches.

When washing hands or washing clothes or on rainy days, water can enter through these pores, especially the hot steam in the kitchen, which is more likely to soak into the case. In addition, the temperature is high and the humidity is high in summer, so if the watch is suddenly cold, the air containing more moisture in the watch will condense into mist or water droplets, which will stick to the watch glass.

If water enters the watch, please send it to the repair center immediately for treatment, otherwise it will cause many metal parts inside the movement to oxidize and rust due to water vapor, causing greater damage.

The fog will disappear temporarily after heating the watch, in fact, the water vapor does not escape from the case, it will run to a relatively cool position, such as the back cover or the heart.

To finally solve the problem of fogging in the watch glass, you need to open the back cover of the watch, dry the movement and case thoroughly, and then replace the waterproof rubber seal or reapply silicone oil to the rubber seal.

If there are mist water droplets in the table, it should be repaired in time to wipe off the fog water droplets to prevent water from entering for a long time, rusting of the parts, and overcolor of the surface. If there is occasionally a little fog, it will disappear naturally after the climate is dry, and it will not have a big impact on the heart.

Selection method:

One of the sensitivity check methods of the watch is to gently shake the watch that has not been wound to stop moving, and observe the movement of the second hand with the help of the power of shaking; If the second hand stops moving in a short period of time, it means that the watch can be fully loosened after full winding, and the sensitivity is relatively high;

If the second hand continues to move for a long time, it means that the watch cannot be completely loosened after full winding, the sensitivity is not high, or the internal mechanism is faulty.

When a normal watch turns the winding shaft of the upper shank, it feels looser at first, and gradually becomes tighter and tighter, and when it can no longer continue to rotate forward, it means that the mainspring has been completely tightened.

There is fog in the watch, indicating that there is moisture in the watch, and under normal circumstances, if there is a small amount of water in the watch, it cannot be observed by the human eye. Although the watch is sealed, there are still very small pores in the joint between the stem and the handle, the joint between the back cover and the case, and the joint between the case and the case, especially in the old watches. When washing hands, doing laundry, or on rainy days, moisture can soak through these pores into the case.

In addition, the temperature is high and the humidity is high in summer, so if the watch is suddenly cold, the air containing more moisture in the watch will condense into mist or water droplets, which will stick to the watch glass.

If there is fog or water droplets in the watch, it should be repaired in time, wipe off the fog or water droplets, or wrap the watch tightly with toilet paper or moisture-absorbing flannel, and bake it near a 40-watt light bulb (about 5 cm) for about half an hour, and the water in the watch will be discharged as water vapor. In addition, you can remove the fog vapor by basking in the sun, pull out the handle of the mechanical watch, and stuff the toilet paper or flannel around the handle, and take it to the sun for about 5 hours, and the toilet paper or flannel plug can remove the water vapor in the movement, so as to prevent water from entering for a long time, the dial is overcolored, and the movement is rusty. If there is a little fog by chance, it will disappear naturally when the climate is dry.

Finally, remind everyone that in order to prolong the service life of the watch, you should try to prevent fog or water droplets in the watch, do not wear the watch when washing clothes, face and bath, and pay attention not to be exposed to rain on rainy days.

A small amount of water or water vapor enters the watch, and when the temperature is high, the water is gaseous, and when the outside temperature decreases, the glass on the surface of the hand is at a low temperature, and the water vapor liquefies to form small water droplets.

The watch is fogged up in water, what should I do?! This is the reason why many people's watches hang up. There's nothing wrong with it, it's just that the water is fogging.

Watch experts point out that you should never put a beautiful watch in a drawer because of this small problem, it is very worthwhile. The easiest way to deal with this situation is to take the strap to the watch shop. Generally, professional watch shops, in fact, will provide some free watch cleaning and maintenance services.

If the machinery is not damaged, it only takes a few minutes for the watch to be refreshed with water and fogging. Don't be clever enough to bake your watch in a gas oven or come up with strange ways to dry it, as this may compromise the precision parts of the watch movement, but the gains outweigh the losses. The waterproof ring is not a panacea for swimming, bathing, surfing, or watching.

This is because what you are wearing on your hand is not an ordinary watch but a sports diving watch, so you can be so arrogant! However, experts warn you not to be too careless! Although the watch has a waterproof function, especially a special sports watch for water sports or diving, it is a first-class master of waterproofing, but consumers still need to pay attention to the waterproof watch with a waterproof ring, which has its limitations.

The main problem is to pay attention to the service life of the waterproof ring, the waterproof ring is like the tire of a car, there is a certain period of time for an average of two to four years, and the waterproof ring will lose its function. In case you don't pay attention, the watch suddenly gets into the water, and it is quite troublesome to repair. Therefore, don't forget to pay attention to the life of the waterproof ring!

How to avoid fading on the watch, the color on the watch is colorful, and the proper use can keep it fresh for a long time. When wearing this kind of brightly colored watch, you should pay attention to stay away from the high temperature environment, and avoid long-term sun exposure when not wearing, chemicals and oil stains are also killers that destroy the color and even the material, and a large amount of soaking water such as playing in the water, rain, and car wash will also bring adverse effects to the color, and after being soaked in salty sea water and sweat, it is best to wipe it clean immediately.

If it is a mechanical watch, it is best to wash the movement with high-grade gasoline and re-oil, otherwise the mechanical part of the watch will rust for a long time, or the quartz watch quartz oscillator will be damp. Your watch is a ruin.

In November 2021, my watch was fogged up and I couldn't see clearly, and I tried the online method to no avail. The next day, I went to a professional watch repair (I didn't sell a watch) to deal with it. After the watch cover is opened, the watch core is taken out and dried under the bulb for a while, the watch glass is dried with paper, the ear wash is used to blow the soot, the assembly is back, and the watch is replaced with waterproof paste, which costs 10 yuan.

The anti-fogging agent for lenses like lipstick can really prevent the lenses from fogging, and I took this wave of operation

If the water ingress is not serious, but there is a layer of fog in the watch glass, you can wear the surface face inward and the bottom shell outward, and wear it on the wrist, and the water vapor can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.

Or use granular silicone to put the watch in a closed container with the water that has accumulated water, and after a few hours, take out the watch and the water will disappear. This method of processing is simple and economical, and does not compromise the accuracy or longevity of the watch. The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

That's if there is moisture in your watch, just go to the watch store to fix it, don't delay it for too long to repair, otherwise it will shorten the life of your watch! o(∩_o~

Remove the lid and heat it up for a while before closing the lid.

Remove the watch case and blow it back and forth on the parts with a hair dryer for 10 minutes, and the effect will come out.

There is moisture in the watch, just use the sun to dry it. If it really doesn't work, take it and fix it!

Just unscrew the cover on the back of the watch yourself and blow it down with a blow dryer.

If you find that the watch is foggy and foggy, you can see it clearly, so you can take it to a professional watch repair (not selling watches), deal with it and change the watch to put the waterproof paste, and the money for half a cup of milk tea will be done!

How to deal with water ingress into the watch:

Method 1: When water enters your case, you can use a granular substance called silicone to put it in a meter-closed container with the watch that has accumulated water, and after a few hours, you can take out your watch, and the water will disappear. This method is simple, convenient, and economical, and does not compromise the accuracy or longevity of the watch.

In addition, the silica gel that has absorbed water more than 100 times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used repeatedly and repeatedly.

Method 2: If the mechanical watch is soaked in water, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it at about 15 cm near a 40-watt light bulb, and bake for about 30 minutes, and the water vapor in the table can eliminate the problem. Do not bake the watch close to the fire, so as not to deform the watch by heat.

If there is water in the watch, you still have to go to the repair shop to wipe the oil and repair it to prevent the parts inside from rusting.

1.Wrap the table in absorbent paper and bake under a 40-watt light bulb.

2.Wearing the watch backwards for 1-2 hours can also remove fogging.

3.The watch can be placed in rice or a substance with the ability to absorb water for 1-2 hours.

1.Why does the watch fog up.

There is fog inside the watch, indicating that there is moisture inside the watch.

Although the watch is airtight, tiny porosity continues to occur at every junction on the case, especially on watches that have been worn regularly. When washing hands and faces, or on rainy days, water can enter the watch through this porosity, especially when the temperature is particularly high, and hot steam can easily soak into the case.

2.If the watch fogs up, it means that there is water.

This statement is completely wrong, fog is actually a very common physical phenomenon, if you wear glasses yourself or you have friends who wear glasses, you can ask, in winter or summer, from indoor to outdoor glasses will immediately fog up, when wearing glasses to eat, it will also make glasses fog up. Fog following water is completely two concepts, water inlet is water entering the inside of the watch. The fog is because there is a relatively large temperature difference between the inside and outside of the watch glass, and the water molecules in the air in the case move to the surface of the glass, and the water molecules will condense with tiny particles, resulting in water mist in the watch glass, so you don't have to worry about the watch getting water.

3.What should I do to avoid fogging on my watch?

1) Rice de-misting method.

You can put the rice in an airtight container with the watch that has generated water mist, and after 24 hours, remove the watch and the water mist will disappear. (Rice has the characteristics of absorbing moisture and absorbing flavor, can absorb water vapor in the air, and put the watch into a container with rice after fogging, and use the principle of rice moisture absorption to dry the watch).

2) Reverse watch law.

Put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the moisture can be eliminated after two hours.

3) Baking method.

Wrap the table tightly with several layers of toilet paper or moisture-absorbing flannel and place it about 15 cm near a 40-watt light bulb (baseboard, small sun, heating). Bake for about 30 minutes, the water vapor in the watch can evaporate, do not bake the watch close to the fire, so as not to deform the watch by heating.

Fogging on the watch is actually a very normal phenomenon, and you don't have to think that it is a quality problem, we only need to use professional and scientific methods to solve this problem.