How Do I Set Up the Mobile Network APN?

How to set it:

1. First click on the settings in your phone, select Wireless & Network, and then go to set up mobile network.

2. Then set the name of the access point of the Blood Claw, and the name of this access point is the setting of the APN.

3. If there is a set APN here, such as CMWAP, CMNET does not need to be set. If not, you need to manually press the meun key, and another way is to reset to the initial value.

4. If you need to rebuild, press the meun key to find the name of the new access point and enter the parameters of the access point name.

How to set up an APN (access point) on an Android phone.

1. In standby mode, click on the wireless control in the menu settings (some phones will display wireless and network settings), and then find the access point name in the mobile network settings.

Then go in and press menu"Name of the new access point"。

2. In the case of standby, click on the wireless control in the menu settings, find the mobile network settings, click on the name of the access point to enter, and press menu"Name of the new access point"。

3. Finally, exit to the standby interface. Press "**" to enter the dial panel and enter.

Hello! I've listed the most complete version.

It is better to put before setting"Menu Settings - Wireless Controls Mobile Network Settings Access Point Name"The APNs in are all deleted.

First standby in the case of Menu Settings - Wireless Controls Mobile Network Settings Access Point Name.

After entering, press menu

New APN"One

Name: CMWAP

The name doesn't matter, whatever it's called)

apn：cmwap

**: Note that it is a three-digit number).

Port: 80mcc: 460

mnc:00

APN Type: default

This is something you have to enter yourself).

Press menu to save.

2. Name: cmnet settings.

The name doesn't matter, whatever it's called)

apn：cmnet

mcc:460

mnc:00

APN Type: default

This is something you have to enter yourself).

Press menu to save.

3. Name: MMS.

apn：cmwap

The name doesn't matter, whatever it's called)

There can be no http: appear, you have to write **) directly

MMS**: Note that it is a three-digit number).

MMS port: 80

mcc：460

mnc：00

APN Type: MMS

This is something you have to enter yourself).

Press menu to save.

Final instructions: 1. There is no need to set the place that is not written.

2. It's best to turn off the wifi first.

3. After all the settings are completed, you can see these 3 settings under the name of the access point, and click to activate CMWAP. At this time, if a small green e and two up and down arrows appear, the setting is successful. If it doesn't work, take it.

The following do: explain: "QQ if CMWAP is activated

And UCWeb can be used, activate CMNET, the built-in browser and the Android market will work normally.

4. After the above are set, enter the mobile phone dial: enter * * - click "mobile phone information" - pull down the bottom of the screen to find "switch DNS", and click on it, and it will be displayed next to it.

allowed", at this point, it's OK. Let's surf!

5. Theoretically, this setting is universal on Android. Test machine G4

tattoo, version.

Here's how:1. First of all, find the "Wireless & Network" function in the phone settings and click to enter.

2. Then find "Mobile Network."

function, click to enter.

3. Then see the "Enter Point Name (APN)" option, which is the APN function, click to enter the APN setting interface.

4. Click on the menu option with three dots in the upper right corner of the interface, and select the "New APN" function in the menu that opens.

5. Then set the name and APN, click the tick in the upper right corner to save the new APN.

6. Finally, select the new APN "CMTDS", and you can improve the network speed of your mobile phone through APN.

7. Test the network speed.

In the future, you can see that the network speed after setting up APN is already very fast.

Take vivoy55 operation as an example:

<>3. Then go to the mobile network page and click on the access point name (APN).

Hello dear <>

The APN settings for China Mobile's LTE are as follows: First, go to your phone's settings page, select "More", and select "Mobile Network" in the "More" page that opens. 2. In the pop-up "Mobile Network" page, you will see an "Access Point Name (APN)", this is the setting item we are looking for, select this item. 3. On the "APN" page that opens, you will see the default settings of the mobile network, including the settings of 3GWAP for mobile phones in the general category, 3GNET for Internet linking, and MMS.

4. Click on the exclamation mark on the right side of an item, you can enter the specific attribute brother socks envy page, the default options are not set, this is provided by the SIM card by default after the SIM card is inserted into the mobile phone, and generally does not need to be changed. 5. If you want to add a new APN access method, you can click the "APN" button in the upper right corner of the "APN" page in step 5, and select "New APN" in the pop-up menu. Have a great day, dear ones.

Hope mine is helpful to you!

If you are using a vivo mobile phone, you can go to Settings - Mobile Network Dual SIM and Mobile Network - Mobile Unicom Telecom Radio and Television - Access Point (APN) to make relevant settings.

It is recommended to use the default access point of the mobile phone, and changing the access point may affect the network; For more doubts, you can enter the official website of vivo - my - **customer service - enter manual and consult **customer service feedback.

China Mobile 5G Network APN Settings:Please make sure that the 5G signal of the mobile phone is normal, if the mobile phone signal is abnormal, it will affect the quality of Internet access. Please make sure that you are using a VPN to surf the Internet, and if there is a key-shaped icon in the status bar of your phone.

It may be that you are unable to access the Internet or slow to access the Internet due to the Internet access. Open the search bar at the top of the settings, enter VPN, click to jump to the settings interface, and choose to disconnect the VPN network or close the VPN software according to the situation.

Meaning:

Due to the difference in contract information, some IoT card traffic cards will have slow Internet access, please replace the ordinary card and try again. Please confirm whether the supplementary card is an arrears card or an invalid card, when the supplementary card is an arrears card or an invalid card, the supplementary card will frequently seize the resources of the main card, resulting in slow Internet access of the main card, you can pull out the supplementary card or turn off the supplementary card: open the mobile phone settings, enter SIM card management or dual SIM management in the search bar at the top, click to enter the settings interface, and turn off the supplementary card directly.

A few days ago this month, I was traveling to Taiwan and had a similar problem with modifying the APN, and I solved it as follows:

At the Taiwan airport, I bought Taiwan's Yuanda Telecom's ** network card (7 days of unlimited traffic), and I need to change the APN to "Internet":

Step 1: Please insert the network card into the matching wireless router (I was carrying a 3G wireless router with the model TL-TR861 of China Unicom's TP-Link), and make sure that the wireless WiFi is turned on and has been connected or found in the settings (at this time, it is not possible to connect to the Internet).

Step 2: Enter the IP address of the (wireless router) device (the management IP address of different devices is different), my router is login and roll, and the initial password is admin (if you have not logged in or changed it).

Step 3: After logging in, click "Advanced Settings Big Destruction", then you can see that the default in the APN column is "3GNET", you can manually change the access point you need (I bought this Taiwan network card needs to change the APN access point to Internet), OK, it's done.

When I bought this card but couldn't access the Internet, I was struggling to check the network from Kaohsiung Airport to Kenting on the bus without a suitable solution, and accidentally saw the IP address displayed on my router made me pause, 5 minutes to solve the problem.

The excitement of being in a foreign country and solving the problem of surfing the Internet alone cannot be expressed in words. Therefore, I can share it with you, hoping to help you solve your urgent needs!

Here's how to set up the APN for mobile Internet access:

1. First open the phone settings;

2. Select wireless and network link connection to set up the mobile network;

3. Click on the name setting of the access point, and after entering, the name of the access point is the setting of APN;

4. Some mobile phones have set APN, such as CMWAP and CMNET, so you don't need to set it. If there is no APN set, set it manually, press the meun key, and select Reset to default.

5. If you need to create a new APN, press the MEUN key to select the name of the new access point, and fill in the parameters of the access point name to complete the setting of the mobile phone Internet APN.

The vivo mobile access point settings are as follows:

Go to Settings - Mobile Network Dual SIM and Mobile Network - Enter the corresponding SIM card (China Mobile, Unicom, Telecom, Radio and Television) - Access Point (APN), and you can make relevant settings. It is recommended to use the default access point of the mobile phone, and changing the entry point of the connector may affect the network.