How to use a cigar cutter, can you use a cigar cutter instead of a regular scissor

1.The handle-mounted cigar cutter is cut at a 90-degree angle to the cigar cap. Generally, it is enough to cut off a distance of 2mm, and when cutting cigars, pay attention to one-time cutting, which should be fast, ruthless and accurate.

2.Cut off the cigar cap with one knife, cut the cigar head should be the right size, but do not cut off the entire seal end, otherwise the outer leaf will come loose, the size of the cut varies from person to person, and those who like to take a big sip can cut it larger. (For some V-mouth cigars, you can cut about 5mm away.)

3.The cigar is at a 90-degree angle to the double-edged cigar scissors, and the cigar cap is placed on the edge of the drilled knife. Once cut in place, as with a handle-held cigar cutter, the size of the cut also varies from person to person.

How cigar cutters are cut.

You can use it however you want, how smooth it is, how to use it.

The cigar cutter can be replaced with the usual scissors. Cigars can be cut with scissors or snapped off with fingernails, leaving a hole the size of a small fingernail to breathe in the outer layer of leaves, and cigar sharpeners can also be replaced with regular scissors. The inhalation end of a premium cigar is completely sealed when wrapping around the wrapper and must be cut or drilled before smoking.

Double-tipped torpedo cigars are closed at both ends and should be cut open at both ends before smoking. Cigar cutters can be used with scissors depending on the type of cigar and the ring diameter, generally about three centimeters from the front of the end row.

Historical background of cigars

Native Americans located on the Yucatan Peninsula in present-day Nianshenze, Mexico.

But Blind can be the first people to grow tobacco. After South America.

Tobacco cultivation began in North America. The earliest peoples who cultivated or smoked tobacco are no longer traceable, but it is certain that Europeans did not know about tobacco until 1492, when Columbus discovered the New World on his voyage.

Everything from Columbus to the discovery of the New World.

At the beginning, when two sailors from Columbus discovered Cuba.

The Indians made use of palm fronds.

Or plantain leaves, which are dried and twisted tobacco leaves rolled up and smoked, and research has revealed that there is a plant on the island that has never been seen before, and the aborigines use the leaves of this plant, dry it, then burn it, and smoke it.

Columbus brought the tobacco seeds he found back to be planted, which became the latest trend of the European aristocracy, and the main leaves were rolled into cigar leftovers and bad leaves were used as cigarettes and pipe tobacco, ** found that more and more people smoked tobacco and began to collect taxes to make money, because it was too easy to make money, so he took the seeds to the colonies and planted them in large quantities.

American colonies, African colonies, Indonesia.

Tobacco was grown in large quantities in colonies and other countries. The habit of smoking quickly spread to Spain and Portugal.

It soon spread to France and Italy, and by the mid-16th century Europeans were already familiar with tobacco.

How to cut a cigar:

1. Choose the right cut end of the cigar.

One end of the cigar is called the filler, and the other end is the foot, which is easy to distinguish because it is wrapped in an eggplant. The eggplant cap is a small round tobacco leaf that is used to hold the wrapper. The end of the filler is closer to the logo on the cigar.

2. Find the "shoulder" of the cigar.

The curved end of the cigar will be stretched out in this position, so keep the curve intact when cutting.

3. Pinch the cigar cutter with the thumb and index finger of your dominant hand.

4. Place the cigar in the loop of the cigar cutter, and check whether the refueling head is aligned with one eye, ensuring that the cutting part is above the shoulder.

Cutting less is better than cutting more. You can continue to trim if you cut less, but you can't take back the part that you cut more. So it's better to take precautions.

5. Cut hard, and cut it in place.

Hold the cigar tightly with the other hand and do not let it slide until the cut is complete. The key to cutting is to get it all in one step. It's better to cut in two pieces rather than a slow-sliding hand.

Choose a sharp cigar cutter. Cigar cutters are like kitchen knives, the sharper they are, the more powerful they are, so it's absolutely right to choose a sharp cigar cutter.

Here's how to cut a cigar:1.Cigars with round heads and round tails should be cut in two before smoking.

2.Cigars with round heads and flat tails, cut round heads.

3.If the cigar has a round head and a flat tail, the round head has an opening or a hole, and it can not be cut. If you still don't feel comfortable when you smoke the setting, you can use a cigar cutter to enlarge the opening to the right level.

4.If you have any leftover after smoking, you should cut off the burning end of the cigar after it has been extinguished. The charred part should be cut off in its entirety so that it can be saved and continued to be smoked next time without affecting the taste of the cigar.

Cigars are a tobacco product, but it is different from ordinary cigarettes, the most expensive cigars are sold for more than 30,000 yuan each, why are cigars so expensive? How is it made?

1. Machine-made cigars.

A machine-made cigar is basically a bunch of tobacco rolled into a column. The process of making this cigar is highly automated.

The cigarette core is made from machine-cut tobacco. The tobacco used in high-quality cigars is relatively uniform in size, texture and grade. The quality of the tobacco used in some lower-grade cigars varies. Stems or petioles are only used in low-quality cigars.

The leaf curl holds the cigarette core together. High-quality cigars use whole tobacco leaves as curl leaves. The curly leaves used in low-grade machine-made cigars are generally processed tobacco leaves, that is, paper tobacco sheets made by mixing ground tobacco pieces with flammable preparations and water and then stretching and flattening.

The tobacco leaf is the outermost part of the cigar and determines the shape of the cigar. Machine-made cigars are made using dry wrapping leaves, so they are not as oily and smooth as handmade "premium cigars".

2. Handmade cigars.

Making cigars by hand is a painstaking process that requires a high level of technical skill and a high level of mental concentration to control the quality of the cigar.

The core is folded and rolled up by a single leaf to allow for an even burn. Then use a rough tobacco leaf as a curling leaf to wrap the core of the cigarette and roll it up. Once the core is fixed, place the bundle in a plastic or cedar wood mold for 30-45 minutes.

The cigarette maker will carefully examine the tobacco leaves and select the best parts and cut them into the best shape for use as the leaf wrap for the cigar. Once the cigar is wrapped, a small amount of vegetable glue is used to ensure that the packaging is secure.

The smoker then cuts a round shape from the leaf to create the cap on top of the cigar. Finally, a little vegetable glue is used to attach the label to the cigar and the handmade cigar is complete. Rate Answer You've already rated!

Good: 0 You've already rated! Not good :

0 you've already rated! Original: 0 You've already rated!

0% is made from tobacco leaves.

The darker the color of the cigar leaves, the sweeter and richer the flavor will be, and the higher the fat and sugar content of the wrapper. The color of the wrapper is sometimes concentrated and can be roughly divided into seven grades:

Teal brown is also known as American Market Selection, abbreviated as AMS or CandelaThe tobacco leaves are harvested before they are ripe and dried quickly, so that the leaves are the same color, light and almost odorless, with a small amount of oil.

dubele claro

The light brown color of light coffee is the standard color for light cigars, such as Havana and those with a wrapper made of Connecticut leaf.

Claro Brown, Medium Brown Dominican paratagas with Cameroon wrapper

colorado claro

Dark reddish-brown Fragrant in taste, the color after complete fermentation and ripening.

colorado

Dark brown Medium in taste, more intense in smell than maduro, and rich in flavor.

colorado maduro

Coffee-like dark brown Bolivar, a full-bodied Havana brand, is well suited to cigar veterans and is considered a traditional Cuban cigar color.

maduro

Black on the palate: Very intense but not very aromatic.

Finally know how cigars are made? Netizen: No wonder it's so expensive!

LZ said the filler. It is generally made by stacking tobacco leaves and rolling them. Then a layer of binder is rolled and the wrapper is made from the finest tobacco leaves.

Not much to say, Sika, easy to use and affordable.

Cigars aren't meant to be smoked, otherwise you'll choke to death, cigars are meant to be wrapped.

Why do people say "Wrapped in cigars" Wrapped in cigars?