Kia Maxima cylinder head 1 3 and 1 6 difference

Hello, it's not the same I hope my answer will be helpful to you, and if you don't understand it, ask the car master if you have a problem. 4S shop professional technician, 10 minutes to solve. 】

One is and one is different in fuel consumption.

Damaged valve seals will cause oil to burn, blue smoke during each cold start, and failure phenomena such as acceleration fatigue and vibration will occur. This necessitates the replacement of the valve seals.

1. Disassembly of valve stem oil seal.

1) Disassemble the camshaft and hydraulic tappet and store them face down, and pay attention to the fact that the tappets are not interchangeable when operating. Disassemble the spark plug with a spark plug wrench, adjust the piston of the corresponding cylinder to the top dead center, and screw the pressure hose into the spark plug threaded hole.

2) Bolt the spring compression tool to the cylinder head. Adjust the relevant valves to the correct position and connect the pressure hose to the air compressor (air pressure is at least 600kpa). Press down on the valve spring with the threaded mandrel and thrust to remove the spring.

The valve lock block can be removed by tapping the valve spring seat. Pull out the valve stem oil seal with a tool.

2. Installation and replacement of valve seals.

Attach the plastic to the valve stem to prevent damage to the new valve stem oil seal. Apply a light layer of oil to the oil seal lip. The oil is encapsulated to the tool and slowly pushed onto the valve guide.

3. Precautions: Before installing the intake and exhaust valves, a layer of oil must be applied to the valve stem. The valve seal replacement process is strict, the valve chamber and cylinder head need to be removed, the work is very complicated, and the camshaft must be placed at the 0 mark line when installing the gauge belt.

The crankshaft is aligned with the top dead center.

The performance of the thousand carriage is non-fuel consumption, the staggered plate is sturdy, the air conditioner is currently 4S shop accessories, the maintenance cost is high, but the shortcomings are indeed too large, the body is not comfortable, including the row.

Kia Chima is wrong.

It should be the first batch of cars to start the machine, all imported, just two parts, basically all imported parts, nine wrong, my car has been 9.18 million grams, and its 30,000 hectares to liquefied gas run no problem.

The 03 and 04 cars are relatively short, and I can rub the top with 170 rounds.

Appearance: Search for the air network**.

The car said that the problem should be some, and I hope it can be used.

How much is the minimum amount of speculation spot**.

How much is the minimum amount of speculation spot**.

How much is the minimum amount of speculation spot**.

Hello, the displacement, the configuration are all different.

I hope my answer is helpful to you, thank you, have a nice ride! If you have any questions, you can ask at any time, if you do not reply in time, it means that I am working, please forgive me, I will reply to you in time after seeing the message, thank you, your support is the driving force for the car master to move forward! [If you have a problem with the car, ask the car master.]

4S shop professional technician, 10 minutes to solve. 】

If the body has less wind resistance, fuel consumption will be significantly reduced. The relationship between the two is also directly proportional.

Maximize the thermal efficiency of the engine.

Generally, the thermal efficiency of gasoline engines (that is, the proportion of fuel converted into useful work) reaches more than 30%, while diesel engines have exceeded 40%, which is the main reason why diesel engines have lower fuel consumption than gasoline engines.