Car dent without paint repair, how much does it generally cost to repair car dent paint

There is a concave network on the Internet that specializes in the collection of car depression repair technicians across the country, which should be able to help you, but because of the different restoration masters, the repair effect is not the same.

The indentation repaired by the master of the car dent repair technology in general, there is no problem to see from the front, and when the light is relatively strong, you can see it from the side, and there will still be slight dent traces! Under strong light, it can be seen that the pattern of lacquer in the depression has changed.

The master with the highest level of technology, except for the naked eye, can not see any problems, the repair of the place of lacquer arrangement, and spacing are the same. Therefore, the most practical method is to move the eyes back and forth from the sunken side under the illumination of the lamp board to observe the direction of the lacquer pattern and whether it is evenly arranged.

Therefore, the car dent repair ** is not simply related to the situation of the dent itself, but also related to the ability of the repair master, so don't blindly pursue low-cost dent repair, the most important thing is to see the effect! After all, each master has different requirements for himself, the repair effect is good and bad, and the real repair is the same as the original car paint, it is not a matter of time, it is experience and understanding. Therefore, when you repair, you must choose a well-known local car dent repair brand chain store, small shop, backpacker, really unreliable, and the asking price is not low.

Depression repair was first invented by the Germans, and many vehicle manufacturers have used similar technology to repair damaged vehicles during factory inspection. With the car.

Bumps are inevitable during the process, and the dent can be repaired with a series of professional crowbars and suction tools, and it only takes one or two hours for a skilled technician.

It is possible to repair the depression on the surface of the body as before, and there are no traces, and this technology is becoming more and more popular by virtue of its short time and low cost.

The majority of car owners are welcome.

However, car dent repair technology is not a panacea, it is limited to parts of the car that are not damaged by paint, and vehicles made of iron and aluminum can be repaired.

Complex. Nowadays, in order to save costs, some car manufacturers use hard plastics instead of iron and aluminum for some parts. Then there is no such thing as this technology.

I can do it. Let's take a look at how it works.

The technology also significantly shortens the repair time (about 20---40 minutes for a depression repair) and greatly reduces the cost (large.

Only about 50% of traditional sheet metal and painting). And the concave part repaired by this technology will never deform and fade, completely making the vehicle.

Show the original style again.

The painting dent repair technology can indeed partially restore the original state, which can quickly repair the dent, saving the trouble of insurance and the larger cost of sheet metal.

Pin, for the majority of car owners, is indeed a good news, but in view of the fact that it can only repair the depression, so the paint damage can not be repaired. Complex.

No spray paint. Automobile dent repair technology is a new technology to repair various depressions formed by the impact of external forces on various parts of the surface covering parts of the automobile body. If there is no paint off, this method is good, but the repair also depends on the location, generally the hood, doors, fenders and other positions are easier to do, mainly these positions can pass through the strip tool.

Hello dear! No, you can't! If the door dent is not damaged to the car paint, you can buy a set of paint-free car dent repairer to repair it yourself.

If the paint has been damaged, then it is necessary to spray paint, go to the regular store to spray paint, and there will be no cracks in the paint surface in the future. Rest assured. Hope mine can help you.

If you're very practical, I think you'll be able to do a good job.

If you earn it alone, you can't do it much, and it's different when you work together.

Summary. Hello, for you to find out that the car dent repair paint generally takes about 500-800 yuan, and the cost of sheet metal dent repair and paint repair is about 600 yuan, but the ** of car sheet metal paint repair will be affected by many factors, such as the location of the scar, the size of the scar, the level of the model, etc. The most expensive is the roof sheet metal repair painting.

If you choose an ordinary repair plant to do sheet metal painting repair, the cost will be cost-effective, about 300 yuan In general, if there is a depression but the paint damage is not very serious, ** is about 100 yuan. If it involves the deformation of sheet metal parts, then the maintenance cost must be **. If your sheet metal parts are not very seriously dented, then the cost is generally 150 yuan, and if it is serious, the cost of repairing the sheet metal parts may reach thousands of dollars.

If you have a large surface of damage, or if the damage is deep enough to be applied with scratch wax or toothpaste, then you will need to have a paint restoration or sheet metal restoration.

I was hit on the back foot and at the back door of a Nissan Teana.

There is also a black car with a dent and a paint drop.

Hello, for you to find out that the car dent repair paint generally takes about 500-800 yuan, and the cost of sheet metal dent repair and paint repair is about 600 yuan, but the ** car sheet metal paint repair will be affected by many factors, such as the location of the scar, the size of the scar, the level of the model, etc. The most expensive is the roof sheet metal repair painting. If you choose an ordinary repair plant to do sheet metal painting repair, the cost will be cost-effective, about 300 yuan In general, if there is a depression but the paint damage is not very serious, ** is about 100 yuan.

If it involves the deformation of sheet metal parts, then the maintenance cost of trillion fiber spring use must be the best. If your sheet metal parts are not very seriously dented, then the cost is generally 150 yuan, and if the family resistance is serious, the cost of repairing the sheet metal parts may reach thousands of yuan. If you have a large surface of damage, or if the damage is deep enough to be applied with scratch wax or toothpaste, then you will need to have a paint restoration or sheet metal restoration.

This touch-up is to repair the dent first and then touch up the paint. **Also pure touch-up**.

How much does it cost to touch up the paint?

More than 200,000 cars.

If you spray paint in an outside repair shop, it will cost 500 yuan at most, and if you go to a 4S shop, it will cost about 1,000 yuan.

Is it more than 1,000 pieces of sheet metal and spray paint?

Yes dear. How long will it take?

Generally, you can go to drive in about 3 days.

Hello! This is not necessarily, there is a project to repair the car paint in sheet metal, and if the car paint is damaged, then it must be repaired.

Automobile dent repair technology uses a variety of technical means such as strong magnetism, strong bonding, and optical lever to decompose, micro-repair, pull and flatten the car depression part point by point, and restore the car depression without moving the original car paint. The force of the tool acts directly on the back steel plate of the concave paint surface of the body, so as not to destroy the paint of the car, so as to achieve the effect of no painting. Hope!

Car dent repair is to repair the dent part of the car paint to its original state. Under normal circumstances, the original state of automobile depression repair can be achieved by acute and obtuse angle depressions. The main thing is that the depression without paint can be repaired as before, the hail crater can be repaired perfectly, and the corners and pillars are not easy to repair.

Using the principles of mechanics, thermodynamics and optics to achieve non-destructive repair of the car without spray painting, retain the original car paint surface, through the technical and experienced professional technicians with external suction and inner top and other methods, you can quickly repair the surface depression caused by the car bump, which can effectively avoid the sheet metal grinding, spray paint baking and other processes, greatly saving the car owner's repair time, and the paint surface will not change color, fade and peel off after the car is repaired.

Hello dear. 4S shop a piece to 2000 left in the reed teasing right, outside the paint repair shop a small piece of about 300 to 500, the big store is a little more expensive, but also bargain The big store will not exceed 500 Generally about 300 can be done, if the injury is not bad, try to cut the light, and there are places where the car paint is not very fast to recover can also be done.

Quick Fix Notes:

1) Primer: Before spraying varnish, the substrate must be thoroughly dried and then sprayed with varnish, otherwise it is easy to lose the paint surface.

2) Pigment paint: Single-component pigment must be used for quick repair.

3) Varnish: the spraying air pressure should not be too large (each time the standing time is 1-2 minutes, depending on the surrounding temperature of the spraying, the lower the temperature, the longer the standing time, on the contrary, the standing time is shorter.) The spraying thickness should not be too thick, otherwise it is not easy to dry.

After spraying, the varnish must be left for 5 minutes before baking.

4) Baking: The distance between the UV lamp and the parts should be 20-25cm, the distance should be too far, the curing is too slow, the distance is too close, the curing is fast but the shrinkage is also fast, it is easy to appear orange lines and loss of light.

The UV lamp cannot be turned on immediately when the power is cut off or turned off during the baking process, and it takes a few minutes to turn it on, because the temperature of the lamp is very high, and you need to wait for the temperature to drop before you can turn it on. Ultraviolet rays are harmful to the eyes, and special protective masks or glasses should be worn during work.

5) Grinding: When grinding, use P1500-P2000 beauty sandpaper to polish the dust and change the point and fully polish it to matte (it is recommended to use dry grinding equipment, if it is a water mill, it should be washed with more water to prevent scratches caused by sand), and the interface should be lightly grinded.

6) Grinding and polishing: the newly sprayed paint surface can not reach 100% curing drying, the polishing area sold separately should not be too long, the surface can not be overheated by hand, and the overheating of the paint surface may cause the phenomenon of light loss if the polishing time is too long.

7) Abrasives: Grindings that do not contain silicone and wax should be used, otherwise there will be pits on the surface when spraying varnish, which will cause rework if it needs to be polished and polished.

**Not fixed, depending on the size of the injury and the difficulty of repair.

It depends on whether you plan to study at a training institution or a physical store. It is estimated that the training institution will be about five or six thousand. If you go to a physical store to study, there is no tuition fee, which is the so-called apprenticeship.

It is paid, and the training time is about one or two months to learn, and the rest depends on the accumulation of experience.

Summary. Paint-free non-destructive repair technology retains the original car paint surface, and can quickly repair the pits caused by driving bumps, hail smashing cars, and fireworks through professional technicians with skilled and experienced technology, effectively avoiding sheet metal grinding, spray paint and other processes, which greatly saves the owner's repair time, and does not have to worry about discoloration, fading and peeling of the paint surface.

Hello, happy to answer your questions.

Is there a repair site in the central city of Longgang District?

Non-destructive repair technology of non-spraying closed paint retains the original car paint surface, through the technical and experienced professional technicians with external suction and inner top and other methods, it can quickly repair the pits caused by driving bumps, hail smashing cars, fireworks and firecrackers, effectively avoiding sheet metal grinding, spray paint baking and other processes, which greatly saves the car owner's repair time, and does not have to worry about the paint surface will change color, fade and peel off.

In ** Fix?

Paint-free non-destructive car dent repair technology is to use the principles of mechanics, thermodynamics and optics to dig mountains to achieve repair. Sheet metal painting can easily cost hundreds of dollars for a part, while the paint-free non-destructive car dent repair technology is relatively cost-effective, and the cost is only about half of the cost of traditional sheet metal painting. Due to the lack of professionals with novel technology, only a few Kaisan stores can consult the local 4s

Summary. Pro, paint-free car dent repair technology is due to external factors on the surface of the body caused by various pits, depressions, depressions to repair, the technology is not to destroy the original paint, the application of a special series of tools and repairers, convenient and quick to restore the body dent to its original state, rather than a general sense of repair, with the repair time is fast, maintain the original vehicle paint, reasonable cost and other characteristics, after the repair of the restoration of the depression part will never be deformed, never fade.

Hello dear, glad to answer for you. Compared with traditional sheet metal repair, the paint-free car dent repair technology has low site and equipment requirements, less investment, and quick results, which can better meet the higher requirements and expectations of domestic car owners for car repair, and has been widely promoted in first-tier cities in China.

Pro, paint-free car dent repair technology is due to external factors on the surface of the body caused by various pits, depressions, depressions to repair, the technology is not to destroy the original paint, the application of a special series of tools and repairers, convenient and quick to restore the body dent to its original state, rather than a general sense of repair, with the repair time is fast, maintain the original vehicle paint, reasonable cost and other characteristics, after the repair of the restoration of the depression part will never be deformed, never fade.

Tips for repairing paint-free dents.

1. Use hot water, which is suitable for the front and rear bumper positions of the vehicle. At present, most of the front and rear bumpers of family cars on the market are cast from plastic materials made of special limbs, and boiling water can restore the concave car body, and the reason is also very simple, the plastic will soften when heated, and it can be ejected as long as it is heated in the concave part. Once the depression is restored, immediately use the prepared cold water to cool down the hot water and let the rubber shrink;

2. Use the depression repair tool, although the plasticity of the bumper is strong, but sometimes the strength of the hot water expansion is far from enough to support the depression repair, so at this time you need to use external force, and the depression repair tool can just meet your needs. A set of tools on the Internet is only a few dozen dollars, which is still very effective for Xiao's scattered depression, and it can also be placed in the car for emergencies after buying;

3. Manual reset after unloading, in fact, the car bumper has a small depression, the owner can also try to remove the screw of the car, and use his hand to reach into the bumper of the body, and push a top in the back, in fact, it can also be recovered. However, the bumper is dented and there are usually a lot of scratches, so you have to go to a repair shop to repaint.