How to change CAD printing from A4 to A3

Cause: Caused by an incorrect setting. Workaround: Reset the correct settings to resolve this issue.

Refer to the following:1Open the CAD drawing software on your computer and print the drawing.

2.Then on the operation page, select Print or Ctrl+P in the upper left corner of the file.

3.Then, in the dialog box that pops up, select the printer that can print A3 paper.

4.Then select the print settings of Paper Size A3 paper.

5.Then use the "Window" to select the area you want to print, as shown in the following figure.

6.After selecting the window, go back to the drawing page, the box is selected, click the mouse again to appear the print settings, select OK to print, and take out the A3 size paper.

First of all, the printer connected to your computer must support A3 paper printing, and the other is to change your A4 version of CAD drawings to A3 paper in the page setup item. You can also apply the A3 paper layout in CAD, try it yourself, this is not complicated.

The printer needs to support A3 paper, point printing - select the printing equipment (select the printer inside, print style) - select the printing settings (the size of the paper is A3 paper, and then specify the boundaries of the printing graphics in the printing area) I use Tsinghua auxiliary software, and there are frame styles so I choose the range,

In the page settings - layout settings - paper size, of course, the premise is that your printer supports A3

1. Solution:

Select Print Select the printer Print settings Find A4 for the paper size Set horizontal or vertical (depending on the content of the drawing) There is a window button in the lower left printing area, click to select the range of printing OK.

Scales are automatically generated.

2. Example: <>

Print There is an option to resize the paper.

Here's how:Operating Equipment: Dell Inspiron 7400

Operating system: win10

Operating procedure: excel

1. Open Excel** on your computer and click on the page layout in the toolbar.

2. After entering the page layout page, click on the paper size.

3. After clicking on the paper size, change the size of the A3 paper to the size of the A4 paper.

4. Finally, Ctrl+P enters the printing page, and the paper in the settings is set to A4 to print.

The size of the A3 document that needs to be printed is, and the maximum format of the A4 paper type that the printer can print is 21cm, and it is obviously not possible to print directly. You can print with the "Copier" zoom function provided by Word, which means that you can use the "Zoom" command to format the document so that it matches the paper size of the printer.

The steps are as follows:

1. Click "File Print".

2. The system pops up the "Print" dialog box, and then click "Zoom".

3. In the "Scale by paper type" drop-down list box, select the paper type you want to use, such as A4 paper type.

4. Click the "OK" button.

In this case, Word will adjust the pages of the document to fit the selected paper type, and in this case, Word will print the document that originally needed to be printed on A3 paper by automatically reducing the font size and graphics on A4 paper. This is similar to the "zoom out" feature of a photocopier.

A4 paper is defined by ISO 216 of the International Organization for Standardization, with a specification of 21*, and most countries in the world use this international standard for paper sizes.

This standard was first incorporated into DIN (DIN 476) by the Weimar Republic in 1922, although some of these formats were developed in France during the same period, but have since been forgotten. ISO 216 defines three groups of paper sizes: A, B, and C. Group C paper size is mainly used for envelopes.

The aspect ratio of Group A paper sizes is 2:1 and then rounded to the nearest millimeter. A0 is defined as an area of one square meter with an aspect ratio of 2:

1 piece of paper. Next A1, A2, A3 ......For other paper sizes, it is defined as folding the paper with one less number along the long side and rounding it off to the nearest millimeter.

The size of the B paper is the geometric average of the paper in Group A with the same number and one less number. Before the popularization of printers, B-group paper was often used. Group C paper size is mainly used for envelopes.

<> demo model: Huawei MateBook X

System version: win10

A3 to A4 format printing, taking Huawei MateBook X as an example, it is divided into 4 steps, the following is the detailed operation of converting A3 to A4 format printing on Huawei MateBook X:

Steps.

File tab.

Launch the target word document that needs to be changed, and click the File tab in the toolbar.

Typography settings. > click the print button in the pop-up toolbar to enter the print layout settings interface.

Settings interface. > find the paper size format setting screen in the print layout settings screen, and click Select.

Complete <>

In the pop-up drop-down menu, change the A3 format of the document to A4.

Tool Material: Sharp Copier.

1.Place a sheet of A4 paper horizontally on top of the panel and A3 paper horizontally inside the copier's tray.

2.Click the "Zoom out" button and click OK.

3.Click on the "arrow up" mediation button, find the "Automatic" option, and press OK.

4.Finally, press the green start button and you're good to go.

1.How to use a photocopier to make A3 paper copy to A4.

2. Then click the copy button to enter the copy interface, as shown in the figure below.

5. Next, you need to select the option buttons of A3->A4 on the operation panel of the photocopier, as shown in the figure below.

6. At this time, press the start button of the photocopier under the first tour to zoom and copy.

7. Finally, the zoom copy is completed, take a look at the size comparison after zooming, the effect is very good, as shown in the figure below.

2.How to make A3 paper copy A4 with a photocopier.

Copy A3 paper to A4 paper and adjust the fixed magnification to 70% using Sharp's copier

First you place the A4 paper horizontally in the paper tray and hold it down at the same time"Copy size"with"Cartons"keys and other lights are flashing when the copy size is selected"a4r", the carton light flashes at the carton and then presses"Launch"Key. Then you put the A3 original on top of the deck and press it"Original size"key, select to A3 light such as celery high, the proportion will be automatically adjusted to 70% (remember that the ratio of A3 to A4 is not 50%, but 70%, and A4 paper must be placed horizontally, otherwise you said that only half of it can be printed, 70% This ratio is calculated according to the length of the corresponding side, not by area,) After these are selected, press"Launch"key to try the nextIt should be fine.

3.How the printer prints A3 paper to A4 paper.

How to print A4 paper into A3 paper I believe that we often encounter slag rulers to A3 paper shrink into A4 paper, A4 paper enlarged into A3 paper, for the printer is not familiar, it may take a little effort. During the printing process of as-built drawings, I encountered this problem, and after some struggle, I finally succeeded in solving it. I will write down the steps now, I hope it can help you.

1. Open the "Print Interface"2, click "Properties"3, click "Paper"4, select "Zoom" in "Zoom Settings"5, change "Print A4 to A3"6, click "Settings(G) below". "7. Change the scale to 141" 8, click confirm until you return to the printing interface, then select the number of copies to print and the page number range, and click confirm to be OK. In this way, the A4 paper will become the A3 paper.

Hope it helps!!

The printer print size needs to be set in the printing software.

Taking Wheat as an example, the steps to set the print size are as follows:

1. Click on the system desktop to open the Wage program.

2. In the Worn program, click on the File tab in the top menu bar.

3. In the File tab, select Print.

4. In the print settings, click the A4 tab.

5. In the print settings, select the size that needs to be adjusted, set it to A3, and the operation can be completed.

Here's how to print A3 to A4:

1. Open the file, press CTRL+P to enter the file printing page, and click Printer Properties.

2. Select the paper, find the zoom settings, click zoom, print A3 to A4, and then click Settings.

3. After clicking on the setting, a dialog box will pop up, set the zoom to 75%, and then click OK, and then OK.

Difference Between A3 and A4 Paper:

The biggest difference between A3 paper and A4 paper is the size of the paper. The size of A3 paper is larger than that of A4 paper, which is 420 mm 297 mm, and the size of A4 paper is 297 mm and 210 mm. A4 paper, as the most commonly used type of office copy paper, has a wide range of functions, such as printing and copying office documents, promotional materials, contracts, etc., and is usually used as scratch paper.

The specification of paper refers to the fact that after the paper is made, it is trimmed and cut to a certain size. In the past, the size of the paper was expressed by how many "open", but now China mainly adopts international standards, stipulating that the format specifications of the paper are represented by marks such as A0, A1, A2, B1, and B2.

The drawings of the national standard can generally be divided into A5, A4, A3, A2, A1, A0 from small to large, of which A0 is the largest, and the ratio of the long side of the paper of various drawing numbers is consistent with the short side of the drawhouse, which is the square of 2, in other words, the drawing is one size difference, and the area is doubled.

The Kiess method for converting a3 to a4 is as follows:

Open the A3 file, modify the file layout, change the column from 2 to 1, then click the small arrow to find the page staring setting, change the margins in the page settings, and change the paper orientation from landscape to portrait.

Change the size of the paper in the paper to A4, and finally change the macro mu text arrangement in the document network to the horizontal direction, and finally click OK to submit. A3 paper refers to the international standard A3 size paper, the size of which is 297mm 420mm, and the size of A4 paper is 210mm and 297mm. A3 paper is twice as large as A4 paper.

According to the basic area of the paper format, the format specification is divided into A series, B series and C series, the format size of A0 is 841 mm 1189 mm, and the format area is 1 square meter.

The format size of B0 is 1000 mm 1414 mm, and the format area is square meters; The format size of C0 is 917 mm 1279 mm, and the format area is square meters; Only A series and B series are used in the format specifications of copy paper.

Common Specifications:

If the A0 paper is split in two equal parts along the length, it becomes the A1 format, and the A1 paper is split along the length to become the A2 format, and so on to the A8 format; B8 paper is also dun in this way, and the format sizes of B8 format A0, A8 and B0 B8 are shown in the table below.

Among them, A3, A4, A5, A6 and B4, B5, B6, and B7 format specifications are commonly used for copy paper.