How do you clear the Audi A4 tire pressure light?

First of all, the light of the tire pressure monitoring is on, which proves that the tire is seriously flat or the tire is punctured. Because if there is a little lack of air, the tire pressure monitoring light will not come on. So go to the place where the tires are repaired and check the tires well to see if the tires are pricked.

When the problem with the tires is solved and the gas is replenished, then the lights are eliminated in the driving computer. Press the button on the right side of the multi-function steering wheel and press the left and right function keys to pop up the settings menu. Then find the option of tire pressure, confirm, and then according to the prompt, there is one that the tire pressure has been tested, return to the position.

Once these are done, the tire pressure monitoring light will not be on.

It is important to remember that the tires must be checked, because it is about driving safety, and you are responsible for yourself and others.

If the tire pressure warning light is on, it can be eliminated with the MMI setting. Press the CAR button and select Store Tire Pressure. If the meter is on TPMS, you need to go to the 4S store for system upgrade.

Several ways to eliminate the Audi A4 tire pressure warning light:

1. Cancel the tire pressure fault light of Audi A4L Tiguan car:

The faulty light was eliminated by resetting it.

Audi A4L Tiguan tire pressure light cancellation method:

Press the SET button on the far right side of the front of the gear lever with a tire pressure indicator for a long time, and if the tire pressure is normal, the alarm light can be eliminated.

3. Audi A4L Lavida tire pressure lamp elimination method:

You can press and hold the tire pressure monitoring button until the light goes out, so that it is eliminated, and then press the tire pressure monitoring button until the light comes on, so that it is set again.

4. Audi A4L Lingdu tire pressure lamp elimination method:

It can be eliminated by setting it inside the multi-function steering wheel. Or use a computerized detector to reset and eliminate.

5. Other methods:

Audi A4L car tire pressure indicator off method: open the glove compartment on the passenger side, there is a button in the upper left corner of the inside (next to the auxiliary airbag key switch), in the case of turning on the ignition switch, press and hold that button until the tire pressure light goes out. However, the tire pressure must be within the normal range.

First, charge the tire pressure to within the specified tire pressure range, and press CAR from the MMI control panel button. Then press the select button to find the tire pressure monitoring system to enter, and store the tire pressure!

First use the air pressure gauge to calibrate the tire pressure of the four wheels, and then store the tire pressure in the **MMI display, and the indicator light will turn off naturally.

You can only go to the 4S store and clear it after passing the computer, provided that you are sure that there is no problem with the tire pressure and turn on the light.

The multifunction steering wheel can be adjusted.

First of all, ensure that the four tires are pressed consistently, it is recommended, and then turn on the ignition switch or start the vehicle, in the MMI panel vehicle settings, select CAR first, the small display screen will pop up the car setting interface, use the big knob in the middle of the control panel to select the tire pressure setting column and press it down, prompt you whether to store, select it and press it again to confirm.

1. After the tire pressure is enough, press and hold the button corresponding to the tire pressure light for 3 seconds.

2. The tire pressure light is an indicator light on the car, and the tire pressure light is on to indicate that there is a problem with the car tires, and it is recommended to check the car tires.

3. Tire pressure, strictly speaking. Air pressure inside the tire. On the rear of the driver's side door, there is a standard tire pressure marker, which is the pressure when the tires are cool, i.e. when they are parked for at least three hours or when they do not drive exceeded. Tire pressure is most accurately measured when the tires are cool.

4. If the tire pressure warning light is on, it can be eliminated with the MMI setting. Press the CAR button and select Store Tire Pressure. If the meter is on TPMS, you need to go to the 4S store for system upgrade.

Audi A4L How to check tire pressure monitoring, A4L tire pressure light reset tutorial In the new Audi A4L of the 2019 model, tire pressure monitoring has been canceled in all series, and only the tire pressure alarm function has been retained. In the event of a wheel problem, the tire pressure monitoring function can find out which wheel is the problem. Through the tire pressure alarm function, you can only know that the tire is faulty, and you can't know which tire is faulty.

Audi A4L Tire Pressure Light Reset Tutorial.

1. The old tire pressure light is reset.

First click on the "car" button, then find the blank button to the right of "tel".

The action knob selects the "Care & Inspection" option.

Then another interface will pop up, click on "Tire Pressure Monitoring System" and then click on "Store Tire Pressure".

Two options will appear on the screen, select "Yes, Save".

2. **Tire pressure light reset.

Find the [Settings & Services] option in the menu bar of the vehicle, click Settings, and continue to click to select [System Maintenance]. Once you've done the above, you're ready to find the TPM.

Precautions for the use of tires.

Check your tire pressure at least once a month.

Pay attention to the cold condition of the tires before checking the tire pressure.

Be sure not to decompress the tires while they are hot.

When the load of the car is large, the tire pressure should be adjusted to correspond.

Acceleration requires time buffering, and the damage to tires is extremely high when accelerating in an instant.

Audi A4 tire pressure.

The light reset, you need to operate the vehicle multi-** system, and operate it in the internal tire maintenance interface, and the specific operation steps are as follows:

1. Determine the position of the tire pressure light of the high Qi instrument.

2. Choose multiple maintenance and inspection options.

3. Select the Troubled Tire Pressure Detection System Hood Option.

4. Enter the storage tire pressure option.

5. Select Yes, Storage.

6. At this time, the tire pressure light of the instrument disappears.

It is recommended to go to a professional shop or 4S to check and repair, and use a computer to match and eliminate.

Hello; After making sure that the four wheels are not nailed, adjust the air pressure to the same as the four wheels, set it in the MMI panel, and store the tire pressure.

Thank you and may it be helpful. Have a nice ride. [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Here's how:

1. First of all, we get into the car to see if the indicator light is still on.

2. If it is still on, we find the operation switch for manual operation.

3. First of all, we enter the main menu and find the tire pressure monitoring system.

4. And reset the tire pressure data, save the data after the data is set successfully, and finally exit the system to extinguish the car, and then find that the tire pressure indicator has been extinguished when re-boarding.

Introduction to tire pressure, strictly speaking, refers to the pressure of the air inside the tire.

Nowadays, many tires are not filled with air. For these tires, the tire pressure requirements are stricter. Air-filled tires are related to the changing seasons. And tire pressure is closely related to the performance of the car, such as comfort and carrying capacity, and can also affect the life of the tire.

Air pressure is the lifeline of a tire, and too much and too low will shorten the life of the tire. If the air pressure is too low, the deformation of the carcass will increase, the sidewall is prone to cracks, and at the same time, it will produce flexural motion, resulting in excessive heating, promoting rubber aging, cord layer fatigue, cord breakage, and will also increase the tire grounding area and accelerate shoulder wear.

If the air pressure is too high, the tire cord will be subjected to excessive stretch deformation, the elasticity of the carcass will decrease, and the load on the car will increase during driving, and the impact will produce internal cracks and bursts, and at the same time, the high air pressure will also accelerate the wear of the tire crown, and reduce the rolling resistance.

Audi A4L tire pressure light elimination method:

First, there is a car button in the middle of the dashboard, press it, and then turn the button in the middle circle, there is a maintenance reset, oil level tire pressure reset, and then click in, click OK.

The second is to press the set button on the far right side of the front of the gear lever with a tire pressure mark for a long time, if the tire pressure is normal, the alarm light can be eliminated.

The third is to operate on the button on the center console, press the menu button, select the body system, and then select the tire pressure, and reset.

Fourth, open the glove compartment on the co-pilot's side, there is a button in the upper left corner, next to the auxiliary airbag key switch, in the case of turning on the ignition switch, press and hold the button until the tire pressure light goes out.

Notes:

When the tire pressure warning light is on, it needs to be paid close attention to. Because tires are the primary condition for vehicle safety, tire pressure monitoring is based on the principle of gravity balance, and if the tire pressure is balanced, it can be displayed normally. If the tire is punctured and deflated, causing a problem, the tire's equilibrium gravity is broken, and the monitoring system starts to alarm.

Adjust the tire pressure of the four cars of the Audi A4L to the normal range, then turn on the ignition switch, operate on the MMI panel, press the car, find the tire pressure storage, and select OK.

Press the set button on the far right side of the front of the gear lever for a long time with a tire pressure marker, if the tire pressure is normal, the alarm light can be eliminated. Operate on the center console button, press the menu button, select the body system, then select the tire pressure, and reset.

The Audi A4 is a B-segment model manufactured by FAW-Volkswagen and launched in April 2003.

As the first model to introduce the concept of a long wheelbase and a turbo, the A4L has been selling consistently from the B5 to the B8. **A4 abandons the teary-eyed design and adds the quattro four-wheel drive mode, which is more stylish and sporty, and has more outstanding power and handling. The interior of the model is exquisitely made, rich in scientific and technological configuration, and has plenty of space, which has good practicality in the B-class model.

Everyone should pay attention to the matter of tire pressure warning lights, ignoring and panicking are not good strategies for safe driving. There are many reasons for the tire pressure alarm light to turn on, and it is necessary to analyze the specific problems when dealing with them, so that we can not be confused in the face of problems and find the key to the problem.

Each tire is equipped with a high-sensitivity induction transmitter to monitor the pressure and temperature of the tire in real time, and the data signal is wirelessly transmitted to the terminal receiving system in the vehicle. When the tire is leaking, the tire pressure is too high or too low, the temperature is too high, and the temperature is too high, the terminal will automatically alarm and display the tire status to ensure the safety of the car. The latest external TPMS can establish a connection with the mobile phone through the receiver to send and receive Bluetooth signals and display tire pressure data.

Hello; This tire pressure light words.

It is generally advisable to check the air pressure first.

After the examination is normal.

Open the car keys.

Enter the Audi central control min system.

This first well, press car click maintenance.

Then the tire pressure.

Reset it and you're good to go.

If the tire pressure warning light is on, it can be eliminated with the MMI setting. Press the CAR button and select Store Tire Pressure. If the meter is on TPMS, you need to go to the 4S store for system upgrade.

Hello, you can use the trip computer to reset, or you can use the check computer.