When opening a software application, the prompt Exception Exception in module does not understand wh

Updated on technology 2024-03-30
8 answers
  1. Anonymous users2024-02-07

    You can try to run with administrator privileges.

  2. Anonymous users2024-02-06

    Workaround for application errors.

    2 Hardware-induced:

    1) It may be a small problem with the memory module, shut down the power off, remove the memory module, clean it up and reinstall it. Replace memory modules if necessary.

    2) Some hardware configurations are too low, especially when running large games, and they can't run properly. Upgrade your computer's graphics card, memory sticks, and other hardware when necessary. (This issue generally does not occur on hardware).

    3 Software-induced:

    1) If the installed software conflicts with the system or other software, pirated or virus-based software, please be cautious ** software, it is best to use genuine software. [The main thing here is to check the boot startup items, and prohibit the boot items that are not necessary to start from booting].

    2) If you have two or more similar software installed on your computer, such as two anti-virus software, two optimization system software, etc., please uninstall one to avoid conflicts and maintain the stability of your computer.

    3) Some system patches** have the wrong patch installed, which may conflict with your current system or other software, and this issue can also occur. Uninstall the patch, find the Acer Plex patch that suits your computer, and reinstall it.

  3. Anonymous users2024-02-05

    If you enter the game and there is an error prompt, it may be that the game has a conflict with the browser, if it is some**out of some error prompts, it may be caused by some** own problems or lack of plug-ins or browser problems, change the browser to try, there is your IE version is lower, upgrade to IE8 to try, if it is IE8 or higher, it may be that there is a problem with IE itself, it is recommended to restore the system or reinstall it.

    Or**Google and other browsers to test it,This is a browser that doesn't use IE as a kernel.,It's very easy to use.,If it's successful, use these browsers temporarily.,IE can also be used (the appearance of error prompts,More complicated,If the above is not right.,Please ask me.,I'm re-using the situation you said.。

    It is usually caused by the incompatibility of the program software and plug-ins in your computer with the system. The solution is as follows:

    1. You recall, what program software or plug-in did you have before you had this kind of failure? If you remember to uninstall them first, if you troubleshoot, it means that the program software or plug-ins are the cause. If the fault persists, it means that there is a bug in the software or plug-ins of these programs and can no longer be used.

    2. Open the IE Selection Tool Manage Add-ons, and if there is a malfunction, there is no plug-in before the failure, if there is one, it is disabled. You can**Super Rabbit let it help you,Clean up the incompatible or malicious plug-ins in the IE add-on,Observe whether the fault is eliminated after cleaning,If you don't rule out your own plug-ins in the IE add-ons are all disabled,(Don't worry about the option can also be enabled at any time) Restart the computer and go online to observe the general state has an effect,If there is an effect, the problem is here,You will slowly restore the IE plug-in process in the future,Which day will there be a failure,There is a problem with the IE plug-in recovered on this day, Disable it entirely.

    3. If the fault is still there, please use the system that comes with the system to restore and restore to the time when you did not have this failure (if the normal mode recovery fails, please boot the computer and press F8 to enter the safe mode to use the system and regret the original).

    4. If the fault persists, it is recommended to reinstall the operating system.

  4. Anonymous users2024-02-04

    The system has been used for a long time, so reinstall the system.

    Or reinstall the app.

  5. Anonymous users2024-02-03

    Poisoning causes system settings to be incorrect or files to be lost. Reinstall the system and you should be fine.

  6. Anonymous users2024-02-02

    My computer is the same, reinstall the system and it's fine. One-click recovery of nothing.

  7. Anonymous users2024-02-01

    1.First of all, rule out the cause of the virus, use antivirus software, such as the latest version of 360 Antivirus Quick Kill 3 5 minutes, according to the inspection results, click to deal with it immediately.

    2.If the application error prompts that a file is missing, it may be that the file is corrupted, according to this component to query which system component is damaged, reinstall the relevant component, restore the program file, and generally solve the problem.

    3.If the components of the software itself are missing, you only need to reinstall the software. For example, when running Thunderbolt, it prompts that a certain file is missing, you can try to reinstall Thunderbolt.

    4.If the above method does not work, it may be a conflict between the software. The workaround is to try closing a couple of unrelated running applications and see if the error will reproduce.

    If it has been resolved, you will know which two software conflicts are and can be resolved by not running both software at the same time. Or feedback the fault to the manufacturer and urge the manufacturer to upgrade and solve it. If you don't know which software conflicts, the feasible solution is to use 360 Security Guard's system optimization, and in one-click optimization, turn off some infrequently used software startups.

    In this way, there are fewer programs running after booting, and the probability of collisions will decrease.

    5.For another application error, the screenshot shows "the application is faulty, the **memory address cannot be read or written", this situation is the most complicated, if the above methods can not be solved, it is likely to be a hardware (mainly memory) failure, may be poor compatibility, can only contact the hardware ** vendor for repair. Or reinstall the system, which may be effective for a short time after reinstallation.

  8. Anonymous users2024-01-31

    There are many reasons why the application is wrong everywhere, what is the dialog box that pops up when the error occurs, some may be system conflicts, and some may be that you accidentally deleted something. You should make it clear, or you won't be able to answer anything.

Related questions
4 answers2024-03-30

The HBMHLY virus is indeed a very stubborn virus. If the system pops up a dialog box saying "Unable to find component--- it was not found, the application fails to start. Reinstalling the app may fix this issue. >>>More

3 answers2024-03-30

Hello! There are generally three possible application exceptions: >>>More

15 answers2024-03-30

Hi: I'm glad to help you close the software before uninstalling it by introducing a few uninstall methods that I know >>>More

6 answers2024-03-30

QQ was poisoned, deleted and reinstalled next.

7 answers2024-03-30

Four reasons and solutions for the win7 system installation software has not responded. >>>More