My company s finance department has a printer and now I want to share this printer on the same LAN.

1. First of all, make sure that they are all in the LAN, and there is no problem for online neighbors to view each other's shared files.

2. Then the control panel - printing and fax machine - adding a printer - the next step - network printer. Browse for printers – then select the one you want to share – and follow the prompts.

3. Thank you.

Add the financial printer on the computer in the lobby, and the financial printer can be shared (you can select the printer when printing in the lobby in the future).

Preferably, this printer needs to be shared. That is, set this printer to be a shared printer, otherwise others will not be able to see it. First of all, you have to make sure that you want to be seen by others, so that you will appear on the Internet so that others can find you.

After sharing, other computers in the same LAN can see the shared printer through the network. Then, you need to install the driver for this printer. This way, you will be able to use this shared printer.

Thank you for your question.

First of all, you need to connect your computer and printer to the same local area network. It is also recommended to set the printer to a fixed IP address.

Then proceed with the installation of the printer. There are two ways.

First, enter the p address and install the printer driver.

Second, use the original driver CD, run the installer, follow the prompts to install, and enter the IP address.

Which way to use, it is recommended to read the manual. Or ask customer service.

First of all, it is necessary to make sure that the Internet of both computers is connected from the wireless router, and can ping each other's IP addresses.

Secondly, the computer that has been plugged into the printer should be set to share in the printer properties, and record the computer name of the computer, it is recommended to turn off the firewall.

Finally, run the other party's computer name on the computer you want to access the printer and press enter, you can see the shared printer name, double-click it and install it according to the prompts.

If you confirm that the printer has been connected to the network, it means that the printer can be shared, and all computers only need to install drivers to ensure that the printer can be shared under one network.

Select the network printer when installing the printer on the computer, and install the driver after seeing the network printer. If you can't see the network printer, the router may have enabled the wireless network isolation function, and you can log in to the router to isolate the wireless network at all.

All of them need to install a printer program, and you can use software.

On the premise that the three computers are kept in the same LAN, after the printer is shared on one computer with the printer installed, the shared printer can be connected to the other computer to achieve shared printing. Here's how to set it up:

1. Click Start in the lower left corner of the computer with the printer, select the device and printer to enter.

2. After entering the list of devices and printers, select the printer you want to share, and click the right click to select the printer properties to enter.

3. Click the share button in the pop-up printer properties interface, check the share of this printer and click OK.

4. Right-click the network connection icon in the lower right corner of the computer, and select Open Network and Sharing Center to enter.

5. You can see the current network type in the page that appears, and click Change Advanced Sharing Settings to enter.

6. Click the public network drop-down arrow on the page that appears.

7. In the page that appears, check Enable network discovery and enable file and share printers.

8. Then click on the My Computer on the desktop to select the properties to enter.

9. At this time, you can see the name of the computer in the pop-up interface, remember the name.

10. Press the win and r keys on the keyboard in either of the other two computers, enter the name of the computer equipped with and the printer in the pop-up run dialog box and click OK.

11. In the pop-up interface, you can see the guest, the password is empty, check remember my credentials, and click OK.

12. After the page jumps, you can see the printer that was shared before, double-click the printer.

13. At this time, you can see that the printer is looking for the driver and waiting for the driver to be added.

14. After the page jumps, you can see that the computer has added the shared printer (the other computer adds the same method as the computer).

First of all, your 3 computers must be within the local area network. One of the printers is connected to the printer and the printer is set to share. This machine is used as a server, turn on the guest user, turn on printer sharing, and then find the printer on the other two machines, network neighbors, workgroup, double-click to install the driver, and then it's done.

Install the printer on one of them first, this machine as a server, turn on the guest user, turn on printer sharing, and then find the printer on the other two machines in the network neighbor workgroup, double-click to install the driver, and then it's good to go.

All 3 units must be connected to the local area network, provided that this is the case.

Connect one of the printers and set the printers to share.

The other two can be printed on 3 computers by finding the grid printer and adding the printer by default.

Click on the bottom left of the computer to start - run - enter the IP address of the computer connected to the printer - enter - at this time the printer should be displayed, click the right mouse button to connect, during which a dialog box may appear, I can't remember the specific content, click OK.

As the predecessors said, open an account directly and share it.

Summary. Are you sharing a printer with three computers? Only one computer that can't be connected means that it should be a computer that is not directly connected to the printer, and here you have to set up printer sharing, and sometimes the system default settings or firewall and other factors, resulting in this computer can not connect to the shared printer!

You can first turn off the firewall,Make a simple folder sharing,Allow anonymous access,Allow guest accounts to log in,Here you have to change it in Group Policy,Some ghost systems have their own software to solve the sharing problem,Then manually specify the IP of the printer computer you want to connect to in Add Printer。

Hello, I have seen your question and am sorting out the answer, please wait a while Are you sharing a printer with three computers? Only one computer that can't be connected means that it should be a computer that is not directly connected to the printer, and here you have to set up printer sharing, and sometimes the system default settings or firewall and other factors, resulting in this computer can not connect to the shared printer! You can first turn off the firewall,Make a simple folder sharing,Allow anonymous access,Allow guest accounts to log in,Here you have to change it in Group Policy,Some ghost systems have their own software to solve the sharing problem,Then manually specify the IP of the printer computer you want to connect to in Add Printer。

Here's how to share a printer in an office:

Tools: Asus X16, Windows 11, Devices & Printers, HP DeskJet 2131.

1. Click the Start Finger Button menu in the lower left corner of the computer desktop, and select the device and printer in the pop-up window.

2. Double-click the icon of the printer to be shared in the pop-up window.

3. In the pop-up printer operation window, click the first printer column in the menu bar, and select Gongtang Joyshare in the pop-up drop-down menu.

4. In the pop-up window, select the second share tag from the left, and then check the box before sharing this printer; Finally, click on the confirmation button in the bottom right corner.

5. After returning to the main window of the printer list, you can see that the specified shared printer icon has displayed the sharing ID of the two villains, complete the sharing.

6. Double-click the selected shared printer will pop up the driver installation interface, and after the installation is completed, you can use this printer normally.