How to clean the radiator of the air conditioner? How to clean the radiator of the central air condi

The cleaning method of air conditioner radiator is as follows:

1. Power failure: unplug the power supply of the air conditioner, open the window to maintain indoor air circulation;

2. Refer to the air conditioner manual or ask the technician to open the air conditioner panel, remove the filter screen, air purification filter, and find the air conditioner heat sink.

3. Spray with a professional cleaner at a distance of 5 cm from the heat sink.

4. Wait for 15 minutes after spraying, reinstall the filter, and run the air conditioning and refrigeration program normally for 15 to 30 minutes, so that the cleaned sewage will be automatically discharged with the drain pipe.

5. Keep the frequency of cleaning the heat sink every one to two months.

Air conditioner radiator cleaning method Steps:

1.First, disconnect the power switch of the air conditioner, preferably unplugging the power supply.

2.Remove the filter of the air conditioner; Some air conditioners are air purifying filters removed.

3.At this time, you can see the radiator of the air conditioner, and spray it with a special cleaning agent aimed at the radiator.

4.After spraying, wait for the cleaner to take effect before turning on the power switch on the air conditioner.

5.After turning on the air conditioner for a while, the dirt on the air conditioner's radiators will be removed from the drain outlet.

Precautions: After purchasing the professional cleaning agent for the air conditioner, we spray the heat sink of the air conditioner and let the cleaning agent wrap on the heat sink. Do not spray too close or too far away to prevent the spray from spilling and bringing additional cleaning.

After spraying for 15 minutes, the air conditioner can be turned on, and the air conditioner can be used normally after 20 minutes of operation.

sh Cheng Miao (shchengmiao).

1. First of all, we need to unplug the power switch of the air conditioner, and after unplugging, remove the filter screen of the air conditioner.

2. After removing the filter, we can see that there is a heat sink inside the air conditioner, take the heat sink down, and clean it with a special heat sink detergent, because the special heat sink cleaner is in the form of a spray can, and we can spray the cleaning agent on the heat sink. 3. If there is no special detergent, we can also use laundry detergent instead, because laundry detergent is a more neutral detergent, put it in a watering can with a little water, shake it, and spray it on the heat sink.

4. After spraying, we clean the radiator with clean water and ventilate it by the window or in the sun for half an hour until the radiator dries.

5. After that, reinstall the radiator, turn on the electric switch of the air conditioner to remove the excess water droplets in the air conditioner's radiator.

The most suitable thing for cleaning an air conditioner is a weakly alkaline aqueous solution, such as caustic alkali water, laundry detergent solution, etc. There are too many types of cleaning agents on the market, and the composition is also very complex, and the use of these cleaning agents can easily cause discoloration of the plastic shell of the air conditioner and excessive corrosion of the heat exchanger, which will cause more trouble. It doesn't work well.

Aircon cleaners are mainly used to clean dust deposits. After a long time, the air conditioner will breed germs and harm health, ranging from dizziness and fever to pneumonia and pharyngitis, which is really terrible! According to a household survey conducted by Fudan University, nearly 9 percent of indoor air conditioner evaporators exceed the standard of bacteria, and the highest even exceeds the standard by 1,000 times, which is 60 times dirtier than the toilet.

The advantage of <> air conditioner cleaner is that it can wash the air conditioner very cleanly, and the disadvantage is that it may damage the original components of the air conditioner. 1. Disconnect the power supply of the air conditioner and open the cover; 2. Disassemble the filter screen to expose the aluminum fins; 3. Align the air conditioner radiator and spray evenly; 4. Wait for one minute and turn on the air conditioner for refrigeration; 5. Black sewage was observed flowing out of the drain; 6. Cover the cover plate and complete the cleaning work. The air conditioner cleaner should be neutral, non-corrosive, and harmless to the body.

However, air conditioner cleaning, disassembly, and cleaning should pay attention not to damage the panel card slot and the fins of the evaporator condenser, so as not to affect the air output, and dirty air conditioners are indeed potential killers of health.

Cleaning the outdoor unit is a ruler benefit, remove the dust, lint and leaves of the outdoor unit, improve the heat dissipation performance of the radiator, and improve the refrigeration effect. If you want the indoor unit to have no peculiar smell, you must clean the filter screen and heat sink of the indoor unit, and if possible, please clean it with a professional after-sales high-pressure water gun. In fact, the main cleaning of the air conditioner is the indoor unit, and the indoor unit is mainly cleaned with filters, fan blades and inner cavities.

You can please wash the wind wheel, but because the dust of the wind wheel is generally thick and has a certain hardness, the cleaning effect of the cleaning agent is not good, it is best to clean it with the steam engine, and the removal effect is also good. Then hold the air conditioner cleaner with your hand, shake it up and down a few times, aim the nozzle at the surface of the evaporator, spray it at a distance of about 5 cm, and move slowly to ensure that the entire surface of the evaporator is sprayed.

The cleaning method of the air conditioner radiator is as follows:

Tools & Materials: Air Conditioner, Mobile Phone, Brush, Plate, Dishcloth, Dish Detergent, Warm Water, Air Conditioner Cleaner.

1. The air conditioner is powered off.

2. Open the outer cover of the air conditioner (the outer cover of the general air conditioner is designed with snaps on both sides), extract the filter that has not been cleaned for many years from the air conditioner, and pay attention to the gentle action to avoid dust. In addition, users who do not know how to install can use the method of taking pictures during the process of disassembling the air conditioner to retain the position before installation and facilitate restoration.

3. As the main filter device for entering the air conditioner, the filter screen must accumulate a large amount of dust, oil stains, and even bacteria and other harmful substances, and under normal circumstances, the filter screen is made of plastic, so it can be directly warmed with dish soap and cleaned with a brush. After multiple cleaning, more than 90% of the dirt can be removed, and it can be dried for later use.

4. Don't worry about damaging the air conditioner, use a professional air conditioner cleaner, and spray the air conditioner cleaner evenly on the heat sink from top to bottom.

5. After 15-30 minutes, the air conditioner cleaning agent will melt into liquid from the foam of the big guard, and in the process of melting the foam, the dust on the heat sink will also be dissolved, and the foam liquid will flow into the sink, and finally after the air conditioner is turned on and the cold air is turned on, it will be discharged with the drain pipe.

6. Clean the shell directly with air conditioner cleaning agent.

7. The cleaning of the surface of the shell and the top of the air conditioner does not require too complicated operation process, the user evenly sprays the air conditioner cleaner on the surface of the area to be cleaned, and stagnates for 3-5 minutes.

8. Wait for five minutes to wipe off the detergent on the surface of the air conditioner with a rag, and scrub the uncleaned area repeatedly. Finally, wipe the air conditioner dry with a clean rag.

9. After the cleaning is completed, let the air conditioner stand for 15-30 minutes, turn on the electricity, turn on the cold air gear and blow for 30 minutes, at this time you will find that the air conditioning in your home has a large wind speed and a fresh smell.