-
Anonymous users2024-02-06Reinstall the driver.
The dongle should be installed normally.
Check the power supply of the board again.
-
Anonymous users2024-02-05The laser marking machine has a red light and is not marked, which shows that the current LMC does not support this fiber laser, what is the reason?
1.The red light cannot be indicated: the red light laser pointer is loose, the stain is blocked, and the fighting pie is broken.
Solution: Disassemble the cover of the optical path and adjust the position of the red light of the Fengzi correctly. 2.
The red light diverges out of concentration: it is loose, the focal length changes. Resolved:
The same goes for refocusing. 3.Update the board!
Achieving the ideal state depends primarily on the selection process of the laser printer's parameters.
-
Anonymous users2024-02-04Summary. Dear, you can follow the steps below:1
Check whether the correct LMC1 program is installed in the hard disk, if not, insert the installation disk into the hard disk and install the LMC1 program; 2.Check whether the control program of the marking machine is installed correctly, if not, put the control program installation clip into the optical drive of the marking machine, and install the control program; 3.Check the configuration of the laser marking machine and modify the relevant information; 4.
If you still have problems, you can contact the manufacturer for technical support.
Dear, you can follow the steps below to the dry brigade: balance closure 1Check whether the correct LMC1 program is installed in the hard disk, if there is no installation, insert the installation disk into the hard disk and install the LMC1 program; 2.
Check whether the control program of the marking machine is installed correctly, if not, put the control program installation clip into the optical drive of the marking machine, and install the control program; 3.Check the configuration of the laser marking machine and modify the relevant information; 4.If you still have problems, you can contact the manufacturer for technical support.
Laser marking machines use laser beams to mark permanent marks on the surface of a variety of different substances. The effect of marking is to expose the deep substance through the evaporation of the surface substance, so as to engrave exquisite patterns, trademarks and words, laser marking machine is mainly divided into, CO2 laser marking machine, semiconductor laser marking machine, fiber laser marking machine and YAG laser marking machine, laser marking machine is mainly used in some base Zhao occasions that require more fine and higher precision. It is used in electronic components, integrated circuits (IC), electrical appliances, mobile phone communications, hardware products, tool accessories, precision instruments, glasses and clocks, jewelry, auto parts, plastic buttons, building materials, and PVC pipes.
The difference between 3D laser marking and traditional 2D laser marking is that 3D laser marking is suitable for laser marking of various metal or non-metal products on three-dimensional surfaces. With the rapid development of laser technology, laser processing is also gradually changing, and in order to meet the processing needs, 3D laser marking technology is now gradually rising. Compared with 2D laser marking, 3D laser marking can be laser marked quickly for uneven surfaces and irregular shapes, which not only improves the processing efficiency, but also meets the individual needs of the current processing. >>>More
Solution. First, the printed handwriting is blurred, and the marking speed is too fast. >>>More
As long as the fiber laser marking machine is controlled and operated by the computer, first open it with the special lock of the laser machine, press the power button, and then turn on the computer, start the laser, print the content, set the printing parameters, start the printing - there is a foot switch, or operate the printing option, or the photoelectric eye and so on to give the printing letter.
Laser marking uses laser photons as the carrier of energy, and the high energy generated after focusing the ultra-fine laser beam to achieve the marking of the surface of the material. >>>More
Laser marking machine is the most widely used engraving equipment in the current practical application, although the probability of its failure is very small, but it does not exclude various small problems that occur in the improper operation of the user process or setting problems, in fact, these problems are small faults that can be solved by the user themselves, in order to improve the user's use of the metal laser marking machine, improve production efficiency. The following Shenzhen Bot Laser Technology provides some daily solutions to problems for new and old users. >>>More