Who knows how to clean tile rust to remove it

Methanol, banana water will do.

The steps are as follows:

1. First of all, prepare the following materials: white vinegar, alcohol, dish soap and water, see the picture below.

2. At this time, pour the dish soap into a container first.

3. Pour the white vinegar into the above container.

4. Then add the alcohol to the container.

5. Next, pour in water to dilute and dissolve dish soap, white vinegar and alcohol.

6. Stir to mix the alcohol, dish soap and white vinegar in the water, so that the mixed detergent is prepared.

7. Then use a rag dipped in cleaning agent to scrub the rust on the tile.

8. Finally, the rust on the tile will be cleaned, as shown in the picture below.

Precautions for laying wall tiles and floor tiles:

1. Before preparing to paste tiles, the base should be cleaned up at the grassroots level, such as lime plaster, latex paint, wallpaper and other decorations on the wall, or dirt on the ground, etc., which must be cleaned up, otherwise the cement mortar will not be firmly bonded with the base layer; If there are cracks in the wall itself, it should be properly treated before tiling.

2. After the wall tiles are pasted, the floor tiles should be pressed again, and if there is a situation where half a brick appears, it should be placed at the bottom as much as possible. In addition, when pasting wall tiles, one wall can not be pasted to the top at one time, so that the tiles are prone to collapse.

3. Because the wall tiles have a relatively high moisture content, this characteristic must be taken into account when pasting, and the base layer should be fully watered and moistened before pasting, and the tiles should be soaked in water for at least 20 minutes before they can be used.

Physical rust removal method: you can find a steel wool ball to wipe, but this method is not very practical, because if the rust on the tile has been for a long time, then it is very difficult to remove it if we wipe it with a steel wool ball, and this method can only be used for the smooth surface of the tile, if it is a tile with a pattern, it will not work.

Then it is to use the machine to re-polish, generally this kind of thing only cleaning companies have, we generally do not have these tools at home, but this method is actually not durable, because after polishing will destroy the smooth surface of the tile surface, so that we will become more difficult to clean and hygienic in the future.

Daily maintenance method of ceramic tiles:

1. Polished brick stain removal and waxing: Although polished brick is not easy to accumulate dust, it is easier to clean. However, after a long period of use, the fine pores on the surface of the polished tile are exposed, and it will also absorb dirt, making the polished tile difficult to clean, and the surface will lose its luster and become old.

Therefore, we should wax it regularly, with an interval of 2-3 months.

2. Antique bricks are cleaned along the texture: antique bricks have concave and convex textures on the surface, in order to pursue the realistic effect of logs, and the texture can be cleaned up. If tea or other daily necessities adhere to the surface of the tile, you can use household dish soap and water to clean it along the texture to make the tile more shiny.

1. Use toothpaste to remove rust. Toothpaste not only removes stains from your teeth, but also removes other marks. Therefore, you can use a toothbrush dipped in toothpaste to brush it on the rust, brush it several times, and after three days of operation, you will be surprised to find that the rust is almost removed.

2. Use a toilet cleaner to remove rust. Toilet cleaner can remove stains on the toilet, and the material on the toilet is very similar to the material on the tile, and the rust on the tile can also be removed with toilet cleaner. Pour some on top of the rust, wait about 30 minutes, and then wipe it with a cloth to remove most of the rust.

3. Use lemon juice to remove rust. Lemon juice contains more vitamins and acidic substances, when this touches iron, it will also produce some chemical reactions, you can use its principle, use this lemon juice to remove the rust, you can also find fresh lemons, in the rust is to squeeze some juice, after standing for a while will wipe off, it can also be perfectly removed.

1. Vitamin C removes rust.

Use 3 or 4 vitamin C tablets to dissolve in water, the tablets can be directly crushed and dissolved in water, usually a glass of water is sufficient. You can also make vitamin C tablets into powder, apply them to the surface of the tiles, sprinkle the floor tiles directly, and wipe the wall tiles directly with some water, and then wipe them with a rag repeatedly to clean off the rust.

2. Oxalic acid solution to remove rust.

There are many ways to use this type of detergent, and in general, this type of cleaner is generally available in grocery stores. Pay special attention to the fact that if you encounter stubborn rust, you can also add some lemonade to clean it together. Add them to the water and wash them with a rag until they are finished before rusting.

3. Remove rust with a steel wool brush.

This method is only suitable for tiles with smooth surfaces, not tiles with concave and convex patterns. In addition, the steel wool ball wipe is still OK for cleaning the new rust, because the new rust is still relatively soft. But for the old rust, you will find that the rust is harder than the steel wool ball, the steel wool ball is laborious to rub and the effect of wisdom is not good.

4. Professional brick washing agent to remove rust.

Pour the brick wash on the bricks first, and then wipe it off with a steel wool ball. If you can't wipe it off, pour on the brick wash and soak it until the rust is removed. Brick washers can quickly remove rust from the surface of tiles, clear water tiles, ceramics and natural stone.

In addition, the rust metal compounds inside the fair-faced bricks and natural stone are displaced, resulting in long-term protection.

5. Add salt and vinegar to remove rust.

If the rust is large and a bit long, then we can consider using salt and vinegar to remove the rust. The method is also very simple, first use the same amount of 20g of salt and 20ml of vinegar together to heat, then use a cloth dipped in the mixture of heated vinegar and salt on the rust spot to cover for 20 to 30 minutes, and then use a rough cloth dipped in salt and vinegar mixture, scrub vigorously, so that the tile rust disappears, and glows with its original brilliance.

1. The rust on the tile is mostly dark red, the main component of these red spots is ferric oxide, in order to be able to remove the rust very effectively, it is necessary to understand these basic common sense, as long as the tile is stained with these rust, it is difficult to clean, you can buy a lotion to clean the rust in the supermarket, and the effect is better to remove these.

2. Some daily necessities at home can also be very effective in removing these stubborn rusts. Use toothpaste, baking soda, and dish soap to take an appropriate amount, mix it into clean water, and then use a watering can, spray it on the rusty place, wait for a while, and gently wipe it with a rag.

3. You can also remove the rust according to some acid-alkali comprehensive methods, rust is an alkaline substance, buy some acidic drugs from the pharmacy and apply them to save energy to remove these stubborn stains. For example, oxalic acid, or some reagents with relatively large acidic concentrations can be.