What is the construction of an electric guitar, the structure of an electric guitar and the role of

1. The main body. Headstock, neck, body: all used as the conduction and resonance of the string sound, the tighter the wood, the better the sound produced.

2. Accessories. Strings: Needless to say, it's all about this pronunciation.

Frets: Distinguish between note position and conductive string notes. Pickup: The heart of the guitar, it picks up and converts string tones to levels, and the input speaker amplifies them.

3. Accessories. Headstock knob: used to fix the strings and adjust the pitch.

Pillow: Reasonable placement of the strings, and play the role of conducting string sounds.

Built-in adjustment bar in the neck: Normally not visible. It is mainly used to strengthen the neck, prevent deformation, and can be used to adjust the curvature of the neck.

Two strap buckles: used to tie the harness. Bridge: It is used to position the strings and play the role of conducting string tones, and can be used with the crank to raise or lower the standard tone, divided into single shake (only lower), double shake (raise and lower), fixed bridge (can not use the crank).

Volume knob: Used to control the output volume of the guitar.

Tone knob: Used to control the reverb of the guitar's output sound.

Coil Control Switch (also known as a gear shifter): Used to select the working pickup combination. In the case of dual single and double pickups, there is a five-gear option. If it's the twin pickups in the diagram, there's only three gears.

Crank: A technique for raising or lowering the standard tone.

Generally, the guitar is composed of three parts: the headstock, the neck, and the top, each of which is composed of different structures. The headstock includes the knobs and pillows.

The neck includes a fret, a fretboard, and a fret. When the panel vibrates, the air inside the cabinet vibrates and amplifies the sound of the strings.

Headstock. Including knobs and pillows. The knobs are used to adjust the pitch of the strings; The string pillow is used to hold the strings. In addition, the brand of the guitar is generally marked on the headstock.

Neck. It includes frets (frets), fretboards, and grade marks. The fret (fret column) is an important part that determines the pitch, and the folk guitar generally has 20 (or 21) fret columns; The fretboard is the position between the frets, which is the position that the left hand presses when playing, and each string has a corresponding plate, through which different pitches are produced; The frets can be used as both "place marks" and "overtone marks", which can help us find the position quickly.

Panel. Probably the one element that has the biggest impact on the sound of the guitar is the top. When the strings are strummed, the vibrations are transmitted to the panel through the bridge. When the panel vibrates, the air inside the cabinet vibrates and amplifies the sound of the strings.

If you want to learn to play the guitar, it is important to understand the construction of the guitar.

01 The headstock and knob are the upper parts of the guitar, which are used to fix the strings and adjust the tightness of the guitar wire.

02 Under the strings and knobs are the frets and frets, the average guitar will have 24 frets, which can produce different pitches when playing, and play a kaleidoscopic melody.

03 Below is the guitar's top, back, and side panels, which are the main parts of the guitar and the place where the guitar resonates and sounds.

04 In addition to these guitars, there are also sound holes, guards, string nails, saddles, etc., these guitar structures can ensure the stability of the guitar strings and prevent sound loss.

A guitar is made up of a body, bridge, top, neck, fretboard, or fretboard.

The bridge on the bridge holds the strings in place and transmits the oscillations and kinetic energy of the strings to the top of the guitar. On most acoustic guitars, the strings are fixed on the bridge by the bridge pins.

The various parts of the guitar exist independently, but they are perfectly unified into a wrestling whole. A high-quality magic guitar that emits wonderful **, all parts are in order to achieve perfect unity, so as to present the unique beauty of the guitar's craftsmanship, the beauty of timbre, and the harmonious beauty that the player needs to play.

The guitar is roughly divided into three parts: the headstock, the hidden neck, and the case. The headstock is the protruding wood on the top of the guitar, with knobs on it, which is used to string the round heel tuning, the neck is composed of the bridge and the fretboard and the pins, the bridge is the plastic thing that puts the strings high in the place where the neck and the headstock, the fretboard is the ground that you press the strings to hide the ground, and the pins are a slender piece of wood that protrudes horizontally from each fret, which is used to jam the strings and emit different pitches when pressing the strings.

The piano box is composed of a resonance box and a piano horse, the resonance box is the largest empty box, there is a hole in the middle of the panel, the piano horse is near the bottom of the resonance box, it is used to hold the strings, without the piano horse can not be wound. Folk pianos generally have a button that can be hung on the quilt, I don't remember what it is called, there is no classical piano, and there is no resonance box for electric guitars, only 2 or 3 pickups.

Electric guitars are generally solid wood, which means they are very heavy. Classical and folk songs generally have a resonance box, and of course there are folk pianos with pure electric sound, but the effect is not good when used to play folk songs. That's basically it, and of course there will be other decorations or something like that, but the main part is here.