What to do if the computer keeps showing that it is preparing Windows

The computer prompts that a system update is in progress. This is a regular after-sales service provided by Microsoft to ensure the security of the system, and it needs to be carried out frequently, and it is not recommended to cancel or shut down.

Solution: 1. Wait patiently: After the system update or system automatic restore changes, it will start normally, the time required for this process varies from computer to computer, and you can only wait patiently for it to complete.

There is no way to cancel or quit at this point, and if you force a shutdown to quit, it may cause damage to system files or even hardware.

2. Restart the computer: If the system update or restore changes fail or the screen is stuck for a long time, you can restart the computer by pressing the console restart button for a short time, or press and hold the console power button until the power indicator goes out to force the shutdown and then restart.

3. Turn off the automatic system update and be hosted by security software

1. Wait for the system update to be completed to enter the system, or short press the power switch or restart button on the current screen, if it still can't be shut down, press and hold the power switch to force the shutdown, and then turn on the system or press F8 to enter the system security mode;

2. Open the control panel, enter the "Security Center", and then click "Auto Update".

3. After entering the auto-update window, click to select "Turn off auto-update", and finally click the "OK" button.

It may be that Windows Automatic Update is set up, and do not turn off the computer operation while the update operation phase is in progress, as this will result in the incomplete installation and configuration of the update component, resulting in unnecessary problems.

We recommend that you wait patiently for the configuration update to complete.

Dear, I'll help you analyze it, because I've also encountered 1, when you shut down the update, you shut down before you finished. Or an unexpected power outage! Dear, my workaround is, boot press f8 to enter safe mode, and then, reboot, it's solved!

Hope you can try it! I gf also has this error, she has automatic recovery, it's fine again.

Reply. 1. When the computer system can't get in, turn the computer back on, immediately press the F8 shortcut key on the keyboard, when a black menu interface appears on the screen, move with the up and down keys on the keyboard, select the last correct configuration, and then press enter to enter the system.

2. If the above methods cannot solve the problem, you can continue the operation just now, select the safe mode in the black menu interface, and then press enter to see if the computer can enter the safe mode to boot the system.

3. If the computer can enter the safe mode, it means that there is a problem with the computer driver, or the computer has installed a certain software or program at one time, which causes a computer conflict, and you can uninstall the software. 4. If the computer cannot enter the safe mode, then it is likely that there is a problem with the computer system, and the computer system can only be reinstalled or restored. 5. Check whether the computer has recently or just installed any new hardware, such as inserting a USB flash drive or mobile hard disk into the computer, connecting the mobile phone, adding a memory module, adding a discrete graphics card, etc., which may cause the computer to be unable to enter the system, at this time you only need to unplug these devices and restart the computer.

The first step is to press and hold the power button to force a shutdown, then press F8 to enter the system security mode, select the last correct configuration, and you can enter the system.

Step 2, after entering the system, click Start in the lower left corner of the computer, and the sub-menu will pop up, and the "Control Panel" will be visible in the sub-menu.

Step 3: Click to enter the control panel page, where you can see "System and Security".

It's a problem with your computer's system.,Just reinstall your computer's system.。

Be patient, this one will take a long time. If you haven't entered the system after two hours, my personal advice is to reinstall the system directly.

The Windows interface is being prepared, which usually occurs when the system is reinstalled.

Note that when reinstalling the system, be sure to replace a system installation file.

The computer keeps showing that it is preparing Windows and cannot enter the system, and there is no other way but to reinstall the system.

In this case, if you can enter safe mode, you can fix it in safe mode, otherwise you will have to reinstall the system.

It is recommended to uninstall the problematic software. Antivirus, system repair and optimization of the computer.

Then it means that Windows is not ready, just wait for it to be ready.

Try it first, can you get your computer into safe mode? If you can get into safe mode, it's fine, if you can't get in, you can only blow up, there is no other better way.